Warning: swinging any revolver cylinder closed will wear down the insides and after a while it won’t reliably rotate and you may have accidents where the cylinder isn’t aligned properly.
Don't worry about not being able to swing the cylinder shut by flipping the gun. You don't actually do that with real revolvers as it will damage the gun. In the movies they do that, but not in real life.
Really wish they did the green gas version of this. It would be so much more practical for me. Sometimes you just want to pop off a few shots, not having to use the entire CO2 capsule.
I have foind on ALiexpress a CO2 capsule shaped gas tank with filling valve at bottom and exit one at the top. It is quite cheap (like $10) and I think it could work in the revolver quite well. I have only tested it in a GBB Mini Uzi replica and the Green Gas doesn't have enough power to reliablty cycle the action (close, but no cigar) - which is not a problem in a revolver. One thing to note - it is necessary to be able to fill the capsule after it was inserted into the gun/magazine otherwise it would have gas for only a couple of shots - that is the problem you can find in the showcases and poor reviews on youtube and on the site - so it might require slight modification of the nut (drill it through) but other than that I think it could work well in the revolver.
At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.
Had the original gun a while now. Eventually parts wear to the point that the cylinder catch (being plastic) can no longer perform and hold it in place. Trigger is a bit iffy, a few other issues. That said, I’ve not maintained it at all, it does/did shoot hotter than quoted. You can also modify the power really easily. Overall a great gun and I certainly don’t regret getting it, however would I buy it again? I don’t think so. With all of that in mind, this is likely upgraded now, and I am aware you can buy replacement parts so this was just my ‘two cents’
It is amazing, then the next review says, it is amazing. Well for such an amazing CO2 pistol the trigger pull is atrocious. It has such a hard trigger pull especially in single action that any real accuracy is impossible as your hand will shake trying to pull the trigger. As for all that tremendous power, amazing power, well mine is the pellet version and at 10 yards it will penetrate one side of a cardboard box but not exit the other side , so it has almost no real use, it will not even penetrate an ordinary tin can and just puts a dent in it, a small dent. So not so amazing is it. Cheers Kit
You saw evike has the EF Glock 18c's? Can't wait to see a rewiew on them. Also whats up with the lack of content? Very supprised you didn't pick up the EF Glock 19x yet
@@throttlegoblinfpv ah. makes sense now. Thank you! Could you maybe help me decide between ASG DAN Wesson original 8" vs this 715 6" version? can't decide!
@@SC-rk7be im sure you like either one, the 8" is of coure more badass looking also i have a 3D printable shell design, which are meant to be cheap and moreless not as worrisome to lose on the field, i also made a speed loader that fits regular speed loader pouches
@@hannibalsmithairsoft5923 it's quite glossy, it gets a rainbow gun metal effect when it's destroyed in fingerprints, and when it's wiped down it's just very dark and shiny nearly black almost. I do prefer it to the silver one I have
Just got one of these and need advice- When i'm loading the co2 cartridge, its hisses and sprays co2 out over the cartridge. Am i twisting the 'alan-key' too slowly?
@@lefishe2485 much obliged, good sir. Final question; is it bad to leave a 'not empty yet' cartridge in the gun over time? Will fade over it's own or damage the gun. Thanks again
@@thomasmartin5182 it’s actually best to leave one with a little gas in rather than none, as the seal can deteriorate over time with no pressure against it
I was thinking of this model 6"BB but i noticed the 4" shoots pellets, I like the chrome. What do you think about the difference between BBs and Pellets. Thanks
Hard to say as I have not truly counted shot for shot but I want to say 60-100 per capsule. Since there is no moving parts which uses more gases, you get more out of these revolvers.
10:19 speed loader first insert them on holder load bb's then load weapon. how fast is it. only works if have many speed loaders ready. nobody has LOL its faster insert bb and load it revolder lol
@@storminormtharp5948 it's what shows its not a real gun. If a cop sees it without the orange tip he might shoot you. Plus it's required in some states.
also on a real gun or that toy slamming the cylinder is bad for alignment of a real gun but that's just a simple toy for children and not heavy build so who cares. don't look into business end and watch BB come out
you don't know much about function or real guns, example vents on top of barrel is for esthetics and in theory some function for cooling, release for cylinder is in wrong place, not a 1 to 1 but great toy for you
Warning: swinging any revolver cylinder closed will wear down the insides and after a while it won’t reliably rotate and you may have accidents where the cylinder isn’t aligned properly.
#LIFESAVER
Thank you General.
I did and my gun broke
So uncivilised, I like it.
Don't worry about not being able to swing the cylinder shut by flipping the gun. You don't actually do that with real revolvers as it will damage the gun. In the movies they do that, but not in real life.
Best review video ever!
Glad you liked it!
Very thorough
Really wish they did the green gas version of this. It would be so much more practical for me. Sometimes you just want to pop off a few shots, not having to use the entire CO2 capsule.
I have foind on ALiexpress a CO2 capsule shaped gas tank with filling valve at bottom and exit one at the top. It is quite cheap (like $10) and I think it could work in the revolver quite well. I have only tested it in a GBB Mini Uzi replica and the Green Gas doesn't have enough power to reliablty cycle the action (close, but no cigar) - which is not a problem in a revolver. One thing to note - it is necessary to be able to fill the capsule after it was inserted into the gun/magazine otherwise it would have gas for only a couple of shots - that is the problem you can find in the showcases and poor reviews on youtube and on the site - so it might require slight modification of the nut (drill it through) but other than that I think it could work well in the revolver.
Your saying once you fire with co2 u have to use the whole tank in the moment?
@@g9sneak7 Basically yeah, it is not recommended to leave a capsule in the gun for a long period of time as it stresses it.
Fun fact: you cant shoot green gas in winter
@@ilmt actually it is advised to keep ur gbb gun/mags gassed up as it help keeps the O-Rings fresh for longer
The top hole infront of the cylinder is for hopup adjustment
My dream Magnum airsoft gun
At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.
Had the original gun a while now. Eventually parts wear to the point that the cylinder catch (being plastic) can no longer perform and hold it in place. Trigger is a bit iffy, a few other issues.
That said, I’ve not maintained it at all, it does/did shoot hotter than quoted. You can also modify the power really easily. Overall a great gun and I certainly don’t regret getting it, however would I buy it again? I don’t think so.
With all of that in mind, this is likely upgraded now, and I am aware you can buy replacement parts so this was just my ‘two cents’
How do you increase the power?
Does it still work, I just got one
@@charlie91757Do you glad to got it sir?
🔥🔥🔥🔥🔥🔥🔥keep up with the great content
I have this...it’s a fun plinker...I use the powered down shells...
Nice, yeah i love the high power shells. The power overall is pretty awesome.
@@MaxCherepenin Do the high power shells work for the 715 model?
@@beison8000 yeah
Any thoughts about wingun revolvers? Are they accurate at good revolvers?
How many shots you get out of 1 co2?
From what I've heard, about 50-60
Hey I got a question when I dry fire it without co2 it jams a lot is that supposed to happen?
Is it true that it has hop up? On Evike it is listed with an adjustable hop up.
The top hole he says is for mounting is for hopup adjustment
@Epic People59 your mom bought this
It is amazing, then the next review says, it is amazing.
Well for such an amazing CO2 pistol the trigger pull is atrocious. It has such a hard trigger pull especially in single action that any real accuracy is impossible as your hand will shake trying to pull the trigger.
As for all that tremendous power, amazing power, well mine is the pellet version and at 10 yards it will penetrate one side of a cardboard box but not exit the other side , so it has almost no real use, it will not even penetrate an ordinary tin can and just puts a dent in it, a small dent.
So not so amazing is it.
Cheers
Kit
The top hole is the hop up its adjustable
12:08 nice
Great Review
You saw evike has the EF Glock 18c's? Can't wait to see a rewiew on them. Also whats up with the lack of content? Very supprised you didn't pick up the EF Glock 19x yet
Yeah, its been a busy few months and getting all of these guns are quite expensive. I am working on getting things going again though!
i found some power down shells for it that you can get which makes lower FPS
newbie here, why would u want lower its fps? cuz for durability sake?
@@SC-rk7be to be able to play CQB and shoot other people etc, CQB arenas usually have FPS limits
@@throttlegoblinfpv ah. makes sense now. Thank you! Could you maybe help me decide between ASG DAN Wesson original 8" vs this 715 6" version? can't decide!
@@SC-rk7be im sure you like either one, the 8" is of coure more badass looking also i have a 3D printable shell design, which are meant to be cheap and moreless not as worrisome to lose on the field, i also made a speed loader that fits regular speed loader pouches
i should've got this one over the ASG Licensed Dan Wesson WG
This is the asg one
I don't when the revolver gun was released. I just got my
What is it that shoots out? That's the only thing that confuses me.
BBS u put them in the shells tip
12:08 haha nice.
Beautiful guns! I own a steel grey 2.5" and a silver 4". I'm yet to get the 6" to complete the collection!
Wait until you hear about the 8 inch
How does the grey look in term of being like monotone grey or almost a case hardened effect
@@hannibalsmithairsoft5923 it's quite glossy, it gets a rainbow gun metal effect when it's destroyed in fingerprints, and when it's wiped down it's just very dark and shiny nearly black almost. I do prefer it to the silver one I have
@@memberberries9782 Awesome, I already have like a race gun gucci glock and wanted too get something super impractical and fun as hell.
The title says airsoft?? Where is the orange tip?? This looks like the bb version?? So wil it shoot steel bbs..
Just got one of these and need advice-
When i'm loading the co2 cartridge, its hisses and sprays co2 out over the cartridge. Am i twisting the 'alan-key' too slowly?
Most likely yes, id just screw it down faster and a little more firmly so it has a good chance of sealing.
@@lefishe2485 much obliged, good sir. Final question; is it bad to leave a 'not empty yet' cartridge in the gun over time? Will fade over it's own or damage the gun. Thanks again
@@thomasmartin5182 it’s actually best to leave one with a little gas in rather than none, as the seal can deteriorate over time with no pressure against it
always put silicone oil on cartridge tip before using
Never slap the cylinder ! Is this Barrel rifle?
This only shoots the plastic 6mm bbs? I thought it shoot the small metal bbs
There are two versions. This is the 6mm version.
Where can I buy this stuff magnum 357 dan wesson? I want to buy...can you help me? Please
When I get this I’m defo playing Russian roulette with my friends, just shooting eachother in the chest
did you do it and how bad fit it hurt
are the bullet casings brass?
I own this and yes, the casings are brass
what caliber is the shells
Does it matter what bb calibre I use?
Yes, the barrel only supports 6 millimetre bb's
How much is this revolver
Around £200
115 in USD
Black Gold alright.
@@abdulzahid3120 its not £200. its £110 on patrol base
What length barrel is this
Does it rust
Where do I buy I really like this gun
evike.com
anyone put a tracer unit on one of these things?
Anyone know of any left handed revolvers for airsoft?
technically all revolvers could be left handed
The barrel on mine is wobbly.
MAy be a defect from the factory. If you just bought it, see what you can do for a return or money back to get another one.
I was thinking of this model 6"BB but i noticed the 4" shoots pellets, I like the chrome. What do you think about the difference between BBs and Pellets.
Thanks
BBs are metal balls and pellets are sharp pointed chunks of metal
@@GhostTacticalTTV Sorry talking about accuracy.
@@Skaetdude they are more accurate but they are more expensive not much more tho
On an average, how many shots per C02 capsule?
Hard to say as I have not truly counted shot for shot but I want to say 60-100 per capsule. Since there is no moving parts which uses more gases, you get more out of these revolvers.
Does it come with the co2 cartridges?
No
Where’s the orange tip
It was removed. All Airsoft guns sold in the US will have an orange tip.
Guys does it use only plastic bbs or something else too?
How much that Gun?
It isn't recommended to use steel bb's because it can damage the barrel.
where do I buy it
Airgundepot.com
10:19 speed loader first insert them on holder load bb's then load weapon. how fast is it. only works if have many speed loaders ready. nobody has LOL its faster insert bb and load it revolder lol
how did you get all of the orange plug out? i remember the orange tip you cut it off but i see it's all gone?
you probably wont wanna do that. just sayin
@@fattybaddie why
@V no it’s not
there is no orange tip on it
@@storminormtharp5948 it's what shows its not a real gun. If a cop sees it without the orange tip he might shoot you. Plus it's required in some states.
what bbs does it use ?
6mm.
do you know what the revolver is made from? Is it steel or some sort of other alloy like alluminium or zinc.
Probably aluminium or yeah maybe zinc too.
@@MaxCherepenin it feels strong though, right?
Oh yes, it feels pretty solid.
@@MaxCherepenin nice, thanks for replying.
@@benp4736 very heavy! The weight of it you'd think it was steel
Can this shoot plastic bbs
Yes, it shoots 6mm plastic BBs
How much ?
120 ish I think I paid for this.
Where can i buy this?
evike.com
Where is the hop up unit to adjust it
I got this gun and all I can think of is “it’s high noon…”
Bruh
Dose it have an orange tip at first
Wheee can I get this?
evike.com has them
👍 parabéns
From where do you got the gun ?
evike.com airsoft version
Thx 😊
And can i buy it in Germany
Jesus bout to ‘save’ some souls
What i dont like of this is the plastic sight
Yeah, have to agree there!
When your aiming the gun ngl it looks like a raging bull
Keep handflipping and you,ll screw up the Alignment of the crane!
Is that rick grimes gun?
No, rick has a colt python
That’s what I thought too
Dietz nuts
also on a real gun or that toy slamming the cylinder is bad for alignment of a real gun but that's just a simple toy for children and not heavy build so who cares. don't look into business end and watch BB come out
"this particulair revolver" no hate but cmon, thats kinde funny
you don't know much about function or real guns, example vents on top of barrel is for esthetics and in theory some function for cooling, release for cylinder is in wrong place, not a 1 to 1 but great toy for you
Can I have that Dan Wesson 715 please🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👍🙏
Go buy your own
I can't buy one there is no revolver here in the Philippines and it's too expensive I need a side arm
@@adingamoyo2186 if you cant import one to you than look at others because honestly revolvers aren't practical
MINECRAFT PLAYZ Just wait until you're old enough lmao..
I guess your right
Any thoughts about wingun revolvers? Are they accurate at good revolvers?