i know im asking the wrong place but does someone know of a trick to get back into an instagram account? I was stupid lost the account password. I would appreciate any assistance you can give me
@Terrance Avery thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff now. Takes a while so I will get back to you later when my account password hopefully is recovered.
nice job... i've done same for my a4 8k and it works perfect.. but QUESTION: if you cover fan of this led where the heat it produces will go? i have the same cover and i don't know if this fan is made to be outside of the box or covered?
It's unbelievably difficult to fasten the holder in Hyundai/KIA if the lamp is installed in a car. You have to take it out in order to install the H7 plastic base. Moreover, there are similar holders on the market but beware! They must have two tabs protruding in the back, so taht you'll be able to turn the base in the headlamp. Otherwise, there is nothing you can grab/push to turn the base in the lamp.
That's an additional part. For this exact model light clip (which I have on my BMW) it's this one www.amazon.com/gp/product/B07YYZ2VDZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
@@MiguelRPD I Used JB weld metal to plastic glue lol. I’ve heard of others using foil to give the space an adapter would. So far the glue has held up for a few months, I really didn’t expect it to. If one goes out idk what I’ll do but I’ll cross that bridge when I get there
Hi, I have a problem and I'm about to give up ... I can't install the H7 LED bulbs in my vehicle (Volkswagen Passat 2012) because its connector is not like the one shown in the video. Do you know what I need to do?
Its like the bulb that's originally in there don't use an adapter it just twist and the prongs connect to power it once it's locked in. I have a 2019 passat and that's the issue I'm having
With the disassembled headlight they are all good, this crap adapter should form a single body with the bulb otherwise you have to use other methods to mount the bulbs.
Damn it I was going to get h7 led but my Toyota avensis has too small spaces for the bulb ... I don't even think I will be able to get inside the fans... And the adapter... No way
I have a Mercedes c207 and i cant pull the bulb out by any means. I have the same adapter as in the video but they just don’t want to come out. What should I do? (They have never been changed )
Finally I got the right installation for Huyndai santa fe 2014 H7, Some sellers don`t put the right video for car make.
So far, the best video for installing these, thanks!
i know im asking the wrong place but does someone know of a trick to get back into an instagram account?
I was stupid lost the account password. I would appreciate any assistance you can give me
@Thiago Lian Instablaster ;)
@Terrance Avery thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff now.
Takes a while so I will get back to you later when my account password hopefully is recovered.
@Terrance Avery It worked and I actually got access to my account again. I am so happy:D
Thanks so much, you saved my ass :D
@Thiago Lian happy to help =)
can you give me the adapter purchase link for h7 kia / hyundai?
finalllyyyyy, someone who can explain it properlyyy
nice job... i've done same for my a4 8k and it works perfect.. but QUESTION: if you cover fan of this led where the heat it produces will go? i have the same cover and i don't know if this fan is made to be outside of the box or covered?
I'm wondering the same
Mk6 Jetta...had to file the clip to fit the bulb in. My clip was square not a perfect circle as shown in the video.
Great Job..... Now u have 0 heat dissipation coming from the lamp, with the dust cap on...
The bulbs have fans in them to help with that
Hola amigo , me dijieron que el cooler del creed led queda afuera del tapon de goma ... es correcto?
Thank god I could watch this without sound.
It's unbelievably difficult to fasten the holder in Hyundai/KIA if the lamp is installed in a car. You have to take it out in order to install the H7 plastic base. Moreover, there are similar holders on the market but beware! They must have two tabs protruding in the back, so taht you'll be able to turn the base in the headlamp. Otherwise, there is nothing you can grab/push to turn the base in the lamp.
Best H7 install !!
are you using the housing clip from the OEM or is this an additional part on the VW install?
That's an additional part. For this exact model light clip (which I have on my BMW) it's this one www.amazon.com/gp/product/B07YYZ2VDZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
hi mate, is this the same on audi a3 2008 model ? i think that i have to take off my front fender first...
We need links!!!!!!!!!!!!!!!!!!!!
Hi,good video, bit,¿ Os possible for Opel Astra G of 2003?, ¿ Is there any adapter?.BEST regards.
Does anybody else hate the H7 design? I want to sell my car just on that basis
😂😂😂 mine vw
I absolutely hate H7 on my Lexus. Trying to install new LEDs take so much time especially with a needed adapter.
@@MiguelRPD I Used JB weld metal to plastic glue lol. I’ve heard of others using foil to give the space an adapter would. So far the glue has held up for a few months, I really didn’t expect it to. If one goes out idk what I’ll do but I’ll cross that bridge when I get there
@@irishuwould5185 my man ! I’m about to do the same FFS
@@McMcPherson still holding strong no problems
What led bulbs did you use I have a hyundai kona
It's legal light bulbs in UK?
Hi, I have a problem and I'm about to give up ... I can't install the H7 LED bulbs in my vehicle (Volkswagen Passat 2012) because its connector is not like the one shown in the video. Do you know what I need to do?
You need an adapter, I bought LED too and can't connect it to my passat now I'm looking for an adapter
Its like the bulb that's originally in there don't use an adapter it just twist and the prongs connect to power it once it's locked in. I have a 2019 passat and that's the issue I'm having
derrick moultrie same issue on same year model. Any luck ?
Larry956 you have to get the lasfit brand
Its a special fit for our car... Once I found the whole (my life story) and twisted it in they work perfect
For vw Passat b6 , which one is that adapter?
Hi, honest question. Will putting the dust cap back be appropriate? As the heat sink is being covered, won't the heat sink not work effectively?
I'm wondering the same
Alguien puede decimr donde comprarlos en México son para luces led para una kia sorento 2017 versión ñx
With the disassembled headlight they are all good, this crap adapter should form a single body with the bulb otherwise you have to use other methods to mount the bulbs.
Great Video, thanks!
can u send me a Link for my BMW E39 - Since 1998 ? I need this pls!
Damn it I was going to get h7 led but my Toyota avensis has too small spaces for the bulb ... I don't even think I will be able to get inside the fans... And the adapter... No way
I glued my LEDs in the socket with JB weld glue. A week so far still holding lol.
How to do citroen ?
I have a Mercedes c207 and i cant pull the bulb out by any means. I have the same adapter as in the video but they just don’t want to come out. What should I do? (They have never been changed )
Try twisting and wiggling the bulb out. I couldn’t get it out at first on my w211 but I eventually got it.
I couldn't fit H7 into my ford falcon
exposed connectors not good
The music is fucking killing me
wow .. useful video ... but so much exposed metal on all those spade connectors and the way you just shoved them in ....
Thank you!