DeAutoKey LED Kit - Headlight Installation for MK6 VW Jetta
HTML-код
- Опубликовано: 12 сен 2024
- A quick overview of how to install the DeAutoKey/DeAutoLED LED kit, with headlights in the vehicle. No cutting or drilling required, plug and play. Hope it helps!
Find the kit here: link.bulbfacts....
DeAutoKey LED Review coming soon!
Looking for all the facts on auto lighting? Check out our other channel BulbFacts!
/ bulbfacts
or visit BulbFacts.com
Thank you for this instructional vid. Please post a link leading to the after market adapter.
This helped immensely. Got the driver side low beam LED headlight installed on my Jetta. Working on the passenger side now.
This is the best example I’ve seen on RUclips so far!! Quick question if I may? I ordered some Anyhow LED’s from eBay and wondering if I could use my original light bracket for them? They didn’t mention any other bracket so I’m kinda wondering about that now. Guess I can fish around and see if it would work. Thanks!
Amazing clear video! Btw, can it be a problem if you put everything inside the headlight housing if it fits? The adapter etc, will it not get too warm?
For HID the box is an Igniter/Ballast and for LED it a driver!
Can you do one for the low beams as well? As these are a bit more tricky to install given the space. Thanks in advance
I glue bulb ring and adapter together to better manipulation. Also using cell phone camera to navigate
Just ordered a set for my mk6 GLI. Cant wait for them to get here
How are the lights? Did you do fogs also?
Hi nice video I brought some katur led headlight for my vauxhall insignia 2011 .. when I fitted the led headlight, with the same adapter what you show in the video.. the led headlight doesnt fit properly it's a little bit loose .. I put some rubber gasket to make little bit better....does any black electrician tape is good to putting on back of the adapter headlight to make sure the led don't get looser
I hope you understand what I mean thank you ..
Nice sharing been looking for DIY to my Jetta MK6, due to exorbitant cost by sending to Garage. Keep it up
I put these in the low beams of my MK7.5 Alltrack and out the rubber cover on. When I ran in through a car wash I got moisture in the housing. I used caulk to seal the rubber cover and have seen no moisture since.
Doesn’t that get pretty hot with the covers on?
Gracias compadre, tu video me ayudó mucho, había hecho 2 intentos de ponérselos a mi Jetta y no pude, vi tu video y me aclaró todas mis dudas. Esta sensacional tu video y muy bien explicado a pesar de que no hablo inglés.
Saludos.
Ya somos dos que no hablan inglés y nos sirve jaja
Jorge Luis Martínez Rico Chingon carnal... a darle 👌🏽
if you have the rubber dust cover on, how does the heat vent out of the headlight assembly?
i know Im asking the wrong place but does anybody know of a trick to get back into an Instagram account..?
I was stupid lost my password. I appreciate any tricks you can give me!
@Apollo Eli Instablaster ;)
@Braden Kohen I really appreciate your reply. I got to the site thru google and I'm waiting for the hacking stuff atm.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Braden Kohen it did the trick and I finally got access to my account again. I am so happy!
Thanks so much, you saved my account !
@Apollo Eli Happy to help :D
I have a 2014 Honda Civic with reflectors
Do I go with the 9006 kit for these.
What kit would you recommend for 2006 vw passat with projectors led or hid and canbus?
hello is it possible to give us the amazon link to buy the H7 LED ADAPTER please i want to make sure what to buy thank you very much. Marck form Montreal Canada
No problem! Here is a link for a MK6 Jetta shown in the video: amzn.to/2Hnpkv4 (KP-101)
Do these come with the adapters as well
Yes it is all included in the kit: deautokey.com/product/h7-leds-for-low-beam-reflector-headlights-fits-volkswagen-tiguan-cc-jetta
hi from where you bought the adaptors? thanks
I'm getting an error on my right low beam but not my drivers side. any tips?
I have a 06 gli you know whre can I find of adapters.. and you what size of bub. Is for parking lights and fog lights
.back up . Can help me
Where do you get those adapters? i have a similar style led but the wrong adapters. Think they should work on my LED's
Hi nicholas! If you buy the DeAuto kit they come with them, but you can find them here: amzn.to/2Hnpkv4 . Thanks for watching and good luck!
I cannot for the life of me get the drivers side LED to sit straight. The housing will only let it sit with a slight angle. This has made the drivers side light output hit the ground on the left side while the right side shoot upward to blind traffic. Anyone else had this problem (or have a solution)?
yes for my 17 gli it’s the same
Mine don't sit properly, what do you mean by "flip it around"? You go off camara and don't understand what exactly you did
Hi Fernando. Sorry I actually meant rotate it 1/2 turn (180degrees). You may have to work it in there, but if you press against each side with a flathead screwdriver it should work. Good luck!
@@blaisek61 how the hell do you get driver side low beam to install. I can't get the clip to seat
The low beam LEDs are now up and ready to ship:
deautokey.com/product/h7-leds-for-low-beam-reflector-headlights-fits-volkswagen-tiguan-cc-jetta
how do you do this for a MK6 Jetta (2006)?
HID or LED?
You put the cover back on? Nobody in all these videos addresses this, I left mine off and the headlight got full of water. Next i tried them on with a new set of bulbs... 1 week... bulbs died
What kit? We have no reports of our kit dying 1 week after install - we have a lifetime warranty and can help you. Many are able to place the entire kit in the headlight and install the dust cap with out kit.
ruclips.net/video/mYaUEBb0L4Q/видео.html
@@Darkmetamorphosis1 That is not our kit but hear it a lot with these random LEDs. Our LEDs/HIDs are reliable and they have a true Lifetime Warranty so you have nothing to worry about! :) Thanks
Does it fit for vw polo 2008 car?
You're awsome man.
Where are you located ? I have a 2017 VW Jetta GLI, in need of some light!!
Midwest
I don't have the wiring that plugs into the back of the bulb like at 3:30 the bulb screws into the wiring/power inside of the housing, how do I hook up the leds to that? 2010 mk6 gti
Fort he 2010 MK6 GTI you need this setup - it is different but works with your car:
deautokey.com/product/h15-daytime-running-leds-high-beams-100-plug-play-fits-many-volkswagen-audi-models
Thanks deAutoLED! You guys have the best customer service I have ever seen!
How come you dont use the resistors? I ordered the same kit and it came with resistors
Hi Mitun Patel - Some cars need them and some dont. Mine didn’t. Try it without and if you get errors then just add them. Thanks and hope that answers your question!
Where did you get your rubber cover?
Right I have the twist plastic ones also.. however the cheap eBay bulbs I bought don’t have a ballast. They have a fan and two prong 🔌.
thank you for your video ;-) i have a question what is the led power 6000k or 6500k ?
Hi Ralph. The DeAutoKey kit we tested at 5700k color. From our tests regarding the brightness, they were about 3.5X brighter than most Amazon LED kits, and 4.5X brighter than stock halogen. Thanks!
FastEnough and compared the 5500k equivalent hid?
Thanks.
Hi RyMuEntertainment - I actually just set up a D2S and H7 projector in one, and plan to test both the DeAuto HID and LED kits, as well as OE HID bulbs like Philips and OSRAM. Be sure to check out my other channel bulbfacts. From what I have seen so far though, the HID kit is a bit brighter, but I like the LED kit better for the pure white color and ease of install with less components. I hope that helps and thanks for the comment!
FastEnough sure thing. Thanks for the reply...lastly... Do you know if there are any adaptors made for hid conversions...yeah that install is a pia.
No problem at all. Yeah you'll want an adapter. Here is the one I used that worked perfect: amzn.to/2Hnpkv4 . Mine was KP-101. Good luck and let me know how it goes!
you are showing this for High beam and not low. The low beam dust cover is hard plastic and will not allow all units to fit without drilling. show what you did for the low beam setup
Low beam on the Jetta has tons of room, a lot more than the high. I just showed high beam install as it’s the same as the low, and easier to see
Any idea if it would work for mk6 golf
You would need this model for the MK6 GOLF - all plug and play:
deautokey.com/product/new-led-h7-low-beam-for-the-vw-gti-golf-gof-sportwagen-alltrack-jsw-tiguan-passat
do the dust cover go back on?
It does but you may have to run an external wire so you can tape or drill a hole
Where did you get those rubber dust caps?
diabolik13 - They came with the car’s headlights. I’m sure you can find replacements though somewhere
FastEnough oh ok thanks for the reply.
What Type of led bulbs use de Jetta Gli 2012? High Beam: H7 - Low Beam: H7 - Fog Lights: ???
Hi Micky - You are correct, the MK6 Jetta GLI uses H7/H7 for low and high, and the fog lights are H8. Hope that helps!
FastEnough thank’s!! For the help. One more question, my jetta need’s led bulbs with canbus error? Or I can install any kind of led bulb?
Not a problem! As far as LED replacements, go with DeAutoKey all the way. Iv'e tried all sorts of other brands that claim can-bus compatibility, but threw errors. My car is near 100% deauto with 0 errors, and all look great! Good luck!
If the bulb is h7 I need the generic clip adapter to install???
*The listing for this product is now up*
deautokey.com/product/h7-leds-for-low-beam-reflector-headlights-fits-volkswagen-tiguan-cc-jetta
hi, i have a question , at min 7:41, when you start the switch , the leds flicker some seconds before turn on. i have the same problem in a jetta mk6 2012, and the "lamp error" in the instruments get yellow until i move the switch to ON position, then the error goes bye and all works perfectly....is that your cas too?, by vagcom i cant desactivate the cold lamp monitoring because my ecu dont permit that setting. thanks, bye
Do you have a lux rating on them?
Hi Patrick, sure do! Check here, and scroll all the way to the bottom of the page: bulbfacts.com/led-kits/chart/
FastEnough Oh duh. I didn't see it at the bottom. Why is there such a different the low and hi lux?
No problem! I’m not sure why, but they do the best in low beams. High beams are good, but there are better kits for highs. They are really amazing in low beams though our (bulbfacts) testing.
FastEnough Thanks. I do have the DeAutoLED HID for low beans already so will consider the others for high.
Sounds good. LED is best for high beams of course for the instant brightness when turned on. Good luck!
So do these blind other drivers like the dumbass’ cars who have HID’s in halogen housing lights? Without the cutoff or a projector housing headlight, I don’t see how these will magically cut to light the road and not blind oncoming traffic
How tf did you get that adapter on. It's like fucking impossible
Does this void your warranty?
No lol
Volkswagens have the most complicated headlight setup I’ve ever experienced!! They add to much for so little..
Thanks. You can use this model as headlights or high beams - resistors are included and required for some models:
deautokey.com/product/h7-high-beam-leds-for-the-volkswagen-mk6-jetta
Fogs to match:
deautokey.com/product/mk6-jetta-gli-complete-led-fog-light-kit
i dont think im gonna spend $145 on just the low beams
then spend $1200 on oem?
I just spent 3 hours trying to install these in the driver's side low beam slot and I still didn't get it. The part at @4:58 is an absolute nightmare. I ran out of daylight today on it.
Agreed this kit is fucking terrible.
Did you get them in? How are they, any problems?