GREASE JOINT REJUVENATOR: Is It A Gimmick? I Bought One & Tried It Out!!!
HTML-код
- Опубликовано: 28 авг 2024
- JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum!
Learn About The Program Here: • I’m Launching A PROJEC...
Join The Project Support Group Here: / membership
IPA Grease Joint Rejuvenator:
amzn.to/46VlDZ7
Greasetek, affordable greasegun that just keeps working:
amzn.to/44EdW87
SAE & Metric Grease Zerk Fitting Assortment:
amzn.to/3Y6assv
These are affiliate links, if you buy anything through them the channel earns a small commission which helps make unsponsored content possible. Thank you!
MORE: For those who like the things which RUclips doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here, by following this link: t.me/TractorHo...
Also, check out our Patreon page to help support the channel: www.patreon.co...
SOME OF MY FAVORITE TOOLS:
KNIPEX German Made Pliers-Wrench:
amzn.to/35fchvN
OTC Slide-Hammer Kit:
amzn.to/3p7mq4Q
Carbide Burrs - An Affordable Set That’ll Last:
amzn.to/2VsxTgH
SUNGLASSES I WEAR - Quality at twice the price:
amzn.to/2VegmbE
Regular Safety Glasses that I Use:
amzn.to/2ATXtEf
My favorite rust removal tool:
amzn.to/3nxAfbK
Makita Metal Cutting Chopsaw:
amzn.to/3A6kVu1
Yes, these are affiliate links! Thank you.
JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum!
Learn About The Program Here: ruclips.net/video/LbxxZ4l9LnU/видео.html
Join The Project Support Group Here: www.patreon.com/OWFA/membership
Hi everyone, I am the inventor of the USA made Grease Joint Rejuvenator. The review was very good, however the tool was not used correctly and is why he only got about half the fittings to take grease. This is a this is a common problem that we run into all of the time. The reason is, it seems like such a simple tool to use so people don’t even read the instructions. They just put oil in it of some kind, some people even use grease which does not work and they do not get results. OK do you want results, please let me explain.
First always turn the tool upside down and Burp any air out of the tool, he did explain that. If not burped the piston will bounce back! Next fill with a light oil even break fluid. Next install tool and only tapping is necessary. You must pump enough oil in through the Zerk fitting to penetrate the hardened dry grease in the joint! Yes the joint is the problem, NOT the Zerk Fitting! It’s the hardened grease trapped in the bearing or pin joint. That’s why some people say to use a blow torch, it loosens the hardened grease, but such an drastic approach is not necessary, hence the grease joint rejuvenator. The amount of taps depends upon the circumference of the pin and the hard and dryness of the grease, not the Zerk! Each tap of the hammer moves the light oil through the clog. It may even take two applications! The point is, read the directions and follow them carefully. If you purchase one of my Grease Joint Rejuvenators and use it correctly and do not like it, we will refund your money, it’s “satisfaction guaranteed. It’s a very cool tool, no one who greases their equipment should be without! God Bless and God speed!
P.S. loosen but do not fully unscrew the grease coupler, it’s not easy to get back together!
Cole the corn star heats up his zerks with a propane torch with pretty good results
You have to be careful the ball check don’t explode and hit you in the face!!! LOL, ask me how I know!!! 😂😂
I use old brake fluid in mine or dirty diesel fuel. I use three or four times before trying a grease gun
I have one of those and I like it. If it doesn't break the grease, I usually replace the zert and then have good success. I use marvel mystery oil.
I had one of these before. I did not have as good of luck with it as you did.
Seems like a great step in the ladder of escalating violence. Anything to cut down the number of replacement zerks needed!
i have the same tool that i used to on a pivot tube on an outboard. combined with heat, it did work shoving grease and light oils in the assembly but in the end I had to fix it properly and disassemble the the thing into its major components and replace corroded bushings. I replaced the coupler with a clamp on still like you find on a grease gun and seemed to hold up fairly well.
Heat, and/or pull the zero and clean. If it still does not fill the cleaned out pocket with wd40 or carb cleaner and have even stood on the grease gun if possible. Make sure you over grease to clean out the old crud and material you used to cut through the crud. Use to change attachments all the time before quick disconnects that make it so easily. You name the size.
Yes use a torch and then pump grease in.
Those work if the problem is the fitting is locked up ... but if everything behind the fitting is solid too, there's just no helping it. Just too much surface area to spread the pressure over
Remove the zerk then Chip the flux off of a welding rod. And heat it up, then poke it in to the hole
IPA Grease Joint Rejuvenator:
amzn.to/46VlDZ7
Greasetek, affordable greasegun that just keeps working:
amzn.to/44EdW87
SAE & Metric Grease Zerk Fitting Assortment:
amzn.to/3Y6assv
These are affiliate links, if you buy anything through them the channel earns a small commission which helps make unsponsored content possible. Thank you!
MORE: For those who like the things which RUclips doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here, by following this link: t.me/TractorHoardersGroupChat
Also, check out our Patreon page to help support the channel: www.patreon.com/OWFA?fan_land...
SOME OF MY FAVORITE TOOLS:
KNIPEX German Made Pliers-Wrench:
amzn.to/35fchvN
OTC Slide-Hammer Kit:
amzn.to/3p7mq4Q
Carbide Burrs - An Affordable Set That’ll Last:
amzn.to/2VsxTgH
SUNGLASSES I WEAR - Quality at twice the price:
amzn.to/2VegmbE
Regular Safety Glasses that I Use:
amzn.to/2ATXtEf
My favorite rust removal tool:
amzn.to/3nxAfbK
Makita Metal Cutting Chopsaw:
amzn.to/3A6kVu1
Yes, these are affiliate links! Thank you.
i use GUMOUT degreaser, tap the gumout into the zerk if it won't release the zerk let it soak over night,tap it again ,it might take a coupe days. i'm satisfied with this tool.
I got one from tractor supply 2 years ago same one I think there 40 or 50 bucks they work alright better than nothing I say
I added it to my Amazon Wish List. Thanks for the review. Tim in northern TN
You can hook up a portapower pump to it with a few fittings that really helps clear them out.
Wow
Ive learned to not mess around. Pull the zert and see it will pass grease through its. No point going passed this step with a rusty zert.
I just remove the fitting and shove a small peice of metal inside the hole and clean out the dirt and whatnot and put it back together and that usually fixes fittings that won't take grease
Do the same except I add penetrative oil into it before I replace the fitting.
Yeah seen one of them like 10 years ago at trade show yeah it works most of the time but there’s always ones that fale
You can use a torch to heat up the grease fittings.
Seems like a good idea.
Thanks for sharing this info. Much appreciated, Brother. Have a great week!
Disassembly, cleaning and reassembly is the only good way to "rejuvenate" a greaseable joint. Something I've noticed on a lot of things that need greasing is, they always put the fitting in the wrong place on the shaft where it's either inaccessible or difficult to access at best, and it's always in a place that has maximum tension on it to impede the grease from entering the housing. Lots of times, things need to be jacked up to relieve pressure on shafts, trunnions, etc.
I wouldn't buy or use one of those tools as it will just break something else.
they arent meant to "fix" grease fittings... theyre only meant to unclog impacted fittings. and for that purpose it works amazing.
Agree. I clean the fitting and where it is screwed into to. I also spray penetrative fluid before replacing the fitting.
They're like 50 bucks but made in USA. They work okay
Most of the time the zerk just needs to be changed and your back in business.
Feel this tool is unnecessary heating with torch then a standard grease gun usually works if its not plug behind the zurk if that's the case take it apart and clean.
Heat!!!!!!!”
I've only had them work 10% of the time
Not bad! I'd try it
Chucky your videos are the best
I've had limited success with these. I've had better luck with the hydraulic pump from my porta power. Not the hand pump, the air powered pump. Had a hose made up at a local heavy equipment repair shop. Mine is 1/4 npt on end that fits pump and a female 1/8 npt swivel on the other. Use a short steel nipple threaded into where the zerk fitting goes.
Use heat prior to using it your success rate will increase.
More haying videos please.
I love mine
Take those bushings off and put bearings in.
heat them up with a torch first
Chuckee is that you?
Use a gas axe to soften the old grease
splooge noun Semen.Ejaculation verb To ejaculate.