Love your channel, I am curious about your opinion on the following. 1. Would you expect CPU thermals to be in the 90C range for an i5-13600K? 2. Also I wanted to make a SFF build and utilize and old GPU I have on hand (EVGA GTX 1080 FTW) the specs should be similar to the 3060 used in the video.
I never really understood why someone would go for the Densium 4+ when the Velka 5 is smaller in volume, smaller footprint, and supports larger gpus. Making a wooden front panel for a Velka 5 would be pretty simple too.
@@wyld3137 yes :) the difference in deshrouding or not is negligable. about 7mm difference. doens't fit. i used some spacers i had laying around to make it work, of course the gap of the front panel looks awkward. i hope ther will be a Densium 5 with support for this gpu and for two 90mm slim top exhaust fans and 47mm coolers. this thing gets toasty.
Not OP, but the Ryzen 7000 series have a VERY aggressive power curve where they push themselves to temperatures in the 90s. This is normal for them and it doesn't matter what cooler you use they'll push it. "Dangerous" temperatures for these CPUs would be in excess of 100 degrees.
If you have any questions or feedback. Please let me know in the comments 🙏
finally, i'm looking for the axp90 x36 use on am5 for such a long time. Thank you for the review
I would like to purchase one of these but the wait-time doesn't sound so appetizing
Now we need AMD to release decent APU's and see what can we do with the Densium APU :D Amazing build, as always!
Have you preordered? There aren't many units, if any, left unallocated for batch 1. Doesn't I'll be getting one, sadly 😔
@@L91 Same here, I'll wait to batch 2. I don't mind to wait since first I need a decent flex psu (and AMD to release am5 APUs)
Would an a2000 12gb fit this?
I was waiting
can we fit any case fan to this build?
Love your channel, I am curious about your opinion on the following.
1. Would you expect CPU thermals to be in the 90C range for an i5-13600K?
2. Also I wanted to make a SFF build and utilize and old GPU I have on hand (EVGA GTX 1080 FTW) the specs should be similar to the 3060 used in the video.
You're very kind. In multicore sure. In gaming, you may just scrape by since it's significantly less demanding
Great vid! in absence of the GPU, do you think it could fit a few 3.5" hdds?
Yes & thanks 😊
Is there enough space for a water cooling setup combining both CPU and GPU ?
👎 not without going with an external radiator and no side panels
I never really understood why someone would go for the Densium 4+ when the Velka 5 is smaller in volume, smaller footprint, and supports larger gpus. Making a wooden front panel for a Velka 5 would be pretty simple too.
Velka 5 is EOL until its next revision. It's also vertical design. I like the Velka 5, too.
It’s cheaper 15$, tbh i prefer densium 4 design, the shipping is free to my country Velka is around 60-70$ for shipping alone
@@rifki0011 I'd say $75 is worth it, given there's no guarantee that cards small enough to fit will continue to be produced.
@@L91 Yeah, but the next revision is within the next couple of months.
@James Linkous it's been EOL for a while now. Is there any source for this date? Website just state 1st half 2023.
How much loud is the small PSU fan?
ENP-7660B models are extremely quiet under 480W
any 4070 that fits the case ?
Deshrouding the Zotac 4070 Twin Edge might work
...it does. Got the case and a 4070 super twin edge oc on the way and will do my best to get it fittedb🤙
@@tpfeiffer1986 är
@@tpfeiffer1986any update?😄
@@wyld3137 yes :)
the difference in deshrouding or not is negligable. about 7mm difference. doens't fit. i used some spacers i had laying around to make it work, of course the gap of the front panel looks awkward. i hope ther will be a Densium 5 with support for this gpu and for two 90mm slim top exhaust fans and 47mm coolers. this thing gets toasty.
CPU too hot
That's a negative
Not OP, but the Ryzen 7000 series have a VERY aggressive power curve where they push themselves to temperatures in the 90s. This is normal for them and it doesn't matter what cooler you use they'll push it. "Dangerous" temperatures for these CPUs would be in excess of 100 degrees.