How to Replace Inner & Outer Tie Rods with Adjuster Sleeve 1988-02 GMC Sierra 1500
HTML-код
- Опубликовано: 26 апр 2020
- Buy Now!
New Tie Rod Adjusting Sleeve from 1AAuto.com 1aau.to/ia/1ASSL00078
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00007
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00040
Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections. This video shows you how to install new TRQ outer tie rods on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Pry Bar 1aau.to/oi3/1AXAA00020
• 18mm Socket 1aau.to/ot9/1AXAA00043
• 22mm Socket 1aau.to/ocP/1AXAA00266
• Pickle Fork
• Pliers
• Side Cutters
• 1/2 Inch Ratchet 1aau.to/ot9/1AXAA00043
• Torque Wrench 1aau.to/oyq/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oeN/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/oaK/1AXAA00343
• Floor Jack 1aau.to/owF/1AXAA00068
• Hammer 1aau.to/on4/1AXAA00091
• Measuring Tape
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I know im asking randomly but does anybody know a trick to get back into an Instagram account??
I stupidly forgot the account password. I would appreciate any tricks you can offer me.
Great info. Fast and straight to the point. Along with specs to torque bolts. Perfect
Excellent video! ,very clean and no extra BS just the right way to get it done.
Thanks for the great video ill be doing this project in the next few days
This way makes more sense than counting threads.
What's a veericle
I knew I wasn’t the only one who knows he said it differently 😂
So I just ordered a tie rod kit from you guys but I noticed that in your how to video that you don’t show us how to pack them with grease being that these do not have zerk fittings why?
What about the locking nut that came with mine does it matter if its on the inner or outer
Very informative !
All very nice except >>>>>> You measured outside joint to outside joint. Depending on Brands, that measurement may vary greatly. Try measuring from center to center of the ball joint for better accuracy!
Regardless of what make of car/truck. When you replace rods they should be the same as previous rods. So it doesn't make a difference. Measuring eye to eye is what is said to be more specific, but i disagree because the tie rods are usually not perpendicular to each other so measuring eye to eye is more of a ballpark measurement. Besides you're going to take vehicle for alignment.
I agree.
Website says fits Chevy c1500 is it same for k1500?
Sleeve opening should be 90° off of from sleeve clamps that hold it together, having them all same direction weakens joint l, especially in offroad application
Great video
Outstanding
Veericle
Is it possible to remove the inner tie rod without damaging it? I want to transfer it to a other vehicle.
My inners are seized in, do you have a vid on a good tool to get them out. I broke a cheap autozone tool trying to remove them. 94 k1500.
Did you ever get it out? What did it take do so?
Thanks
Thank god I live in Texas all that rust
Lol same
Beating the rust off it 🤣
I’ve been looking for heavy duty tie rods and adjusters for this body style but can’t find anything
Probably too late but look at rockauto
Mevotech do heavy duty ones
@@jessegale5559 kryptonite has some beefy ones to
Would you like some truck with that rust? Glad I live in the south.
Might as well replaced all the suspension components....damn all that rust.!!
Lol i thought mine was bad, this makes mine look like it came out of the factory
Now wait a minute give me a video on that sleeve he said do not put it on that side he said turn around and put on the other side, so which one is it?
Would a 88-02 chevy k1500 be the same steps?
+Chase Grote Thanks for watching! The install should be the same or similar for a 1988-2002 Chevy K1500. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
I believe this was a K1500. You can see the drive axle and boot.
Is this the same as on a 1994 chevy g30?
Yes currently doing a g30 its about the same order tierods and tierod adjuster (the center piece)
Counter an clockwise for the rod ends When putting them on the sleeve Both sides do not go on the same way
No grease injection?
That's what I just saw on mine that I ordered has no regrease nipple? No wonder there cheap
I just put the trq tie rods on my truck
Safely raised the vericle
Damn that trucks under carriage is rusty
LingLong tires haha
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!