How to: LSA Blower Isolator Replacement with a ZZP 2.4 Pulley | LSA Blower Swap
HTML-код
- Опубликовано: 7 сен 2024
- Follow me on Instagram!
/ lsx_matt_
Music:
Day After Day by Joakim Karud / joakimkarud
Joakim Karud - Made In 5
Soundcloud - / joakimkarud
TAKE THE CHANCE by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Something New by Joakim Karud / joakimkarud
Music promoted by Audio Library • Something New - Joakim...
Parasail by Silent Partner from RUclips Audio Library goo.gl/YmnOAx
▶︎ Check out the playlist of artist: goo.gl/KftnoE
Highway Danger by Silent Partner is part of the RUclips Audio Library (www.youtube.co....
Believer by Silent Partner from RUclips Audio Library goo.gl/YmnOAx
Isolated Mind by A Himitsu / a-himitsu
By The Croft by Joakim Karud / joakimkarud
Excellent video brotha, I like how you explained the things we didn't get to see!
Rear cover might get anaerobic sealant. Allows thinner layer of sealant for machined surfaces like that. Also eliminates the need for traditional thicker gaskets.
Hey man new subscriber here. I have a 87 Trans Am with a 305 all original with only 80,000 miles on it, I've had it for 12 years. It's obviously lacking power with that tiny motor in it and your videos have really inspired me to get started on my swap! I've got my eye on a 6.0 iron block. Keep up the awesome content!
Thanks! Good choice with the 6.0. I would love to get to upgrade to one as well someday.
Can you pm me the link to the solid isolator, mine makes a rock tumbling sound.
Great video. Keep us updated. Very interested in this option for my LS swap.
Nice to know how to change pulley about to install one on my C5Z. Now I can upgrade my pulley and isolator 😃
Anaerobic sealant just like in a transmission, drys in the absence of air. For machined surfaces!
I need one of those LSA Blowers for my LY6 S10 project. Thanks for the video and info.
Awesome build. I've been wanting to do this for along time so I'm interested in this build for sure. I hope some time it will be possible for me to get one of these and do the same.
Thanks for really opening my options. I'm currently looking in to salvaged fifth gens. I think this engine would make a great option for it.
I know I'm kind of off topic but does anybody know a good website to watch newly released tv shows online?
@Vincenzo Genesis flixportal :P
@Yehuda Watson Thanks, I signed up and it seems like they got a lot of movies there :D I really appreciate it !
@Vincenzo Genesis Happy to help xD
So is the 2.4 a good choice for a mostly stock engine? I put headers and 3" pipes on and lost a few PSI pressure so i want to put it back to stock, maybe a little more but want to stay away from fuel modifications. I am looking for the right number to get a good boost without running too lean.
Sweet build! I am really cosidering finding a Third Gen to do a Turbo LQ4.
seen this car in person & seen it go down the track ,,,,,,,, VERY NICE JOB ON THE WORK RUNS SMOOTH & VERY FAST FOR A STICK ON THE 1/4 MILE mat you did a nice job on this when i do a ls conversion is it ok if i consult with you jk
Can you post the guy where you got the parts from? Also, the quick connect is compatible with 2.55 pulley?
I have a factory ly6, with lsa . Trying to 18 to 20 psi . @7k rpm . What size lsa Pulley do I use.
Hey Matt, I’m in the middle of LSX swapping my 85 WS6 and I’m too the point where I’m deciding on powder coating my stock K Member or swapping a BMR Unit, which would you recommend if you did it all over again?
Does your pulley have a Set screw to the blower shaft? To keep it from turning on shaft
Matt is the man
That green coupler is making rattling noise already on mine. I was told to replace it with LPE one.
Same here. I replaced it with an lsx innovations piece. Next step with be LPE.
@@lsxmatt My friend told me that his rattle is gone after getting LPE coupler. 👍 I'm gonna get LPE one soon.
Where did you get your lid from...and did you have to do any modifications
Awesome video!
do you need supporting mods for the smaller pulley?
Hey Matt, new subscriber...looking at doing an LS swap in a 92 Camaro, what LS engines will fit in the third gen? You mentioned you wanted to do a ls3.
Looking for some good reference sites.
They'll all fit.
The LS family of engines is like the pontiac family of engines in that they're all dimensionally the same size.
Great vid
What did the supercharger run you? I'm in the middle of a 5.3 swap right now but idk which way it's gonna go after it's in .. love the vids by the way!
Haha sorry I read your question wrong before. I paid 2500 for it. It came with a brand new lid, lsa fuel rail, new gaskets, and all the hardware. I bought it used off ebay, listed as a low mile warranty take off.
Prices are climbing on them now. I think the well is drying up.
Great vidya
Nice!👍
Is belt slip a problem
That Red Stuff is Anaerobic Gasket Maker!!! It Dries in the absence of oxygen. I'm a Chevy Mechanic. Use it alot. Heres the Permatex link for ya dude.
www.permatex.com/products/gasketing/anaerobic-gasket-makers-flange-sealants/permatex-anaerobic-gasket-maker/
Ahhh good to know! Yea there was so little on there I didn’t know what it was haha.
LsxMatt np happy building
Coming from a tool and die guy, Never ever use a buff pad with a die grinder like that on a sealing surface!
I've worked in shops for 20 years and all the mechanics use pneumatic tools and roloc pads for gasket removal, but they're on steel or iron for the most part. Aluminum is too soft.
Correct! no longer a milled surface now.