Probably should advise that there are 4 screws at the nose and the two that need backing off are the deeper two! Had to find this out from another Paslode youtuber!
Too easy. Thanks for the helpful advice. Saved myself $100 each time I send it in for servicing. Don't know why I didn't do this earlier. My gun had a lot of gunk inside but clean as a whistle and works perfectly. Now I can service it more regularly. Thanks a lot!
I bought this nail gun as we were planning to renew all the fencing in our back garden. As this involved 19 double slatted fence panels, 10 of which needed to be cut down in size, we knew there would be a need for a great ruclips.net/user/postUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt deal of re-stapling the wooden slats to the wooden framework. Each alteration required the re-stapling of 62 wooden slats with double staples. Prior to starting the work we ordered sufficient additional staples as per the instructions with the gun.The gun performed fantastically throughout the entire project with no jams of misfires. The adjustable power was excellent allowing the staples to be fired into the 8mm slats to the correct depth. For the price paid this was a bargain and it proved itself to be so reliable and versatile making an arduous task much quicker and professional. I cannot recommend this product highly enough and it will be used on many other projects in the future.
Thank you I325xp just bought paslode cf325xp used from builder who used it once I had to drive over one hundred miles and back. Can I use other nails then paslode? I am happy with these video's and glad to learn from experience. Pete
Thanks for the video, it gave me the confidence and knowledge to service both this gun and my angled Bradder. One question, how do you clean the "Spark plug "? Do you just take the cap off and spray the degreaser?
i guess Im randomly asking but does anyone know of a trick to get back into an instagram account? I stupidly lost the login password. I appreciate any tricks you can offer me.
I cant for the life of me get my cylinder head apart from the rest of the gun. I assume alot of people have this problem after they actually use their gun for 10k nails so any help would be greatly appreciated
I understand that green is charged and red is going flat battery. What is it when you get green and a half flash red, but the battery is full, and it's a brand new battery
Not a very good demonstration of which screws to remove at the front. You could either show them in the video OR mention to 2 out side screws. Not the middle 2. Very poor camera work in close ups. Nice hands, heads, but not where the oil is going. Now to sort out how to reassemble the bits I took off by undoing the 2 screws at the front 😡
Can see these guys don’t read the comments. If they did they would re record this video. Many comments about which of the 4 screws at the front to remove. Also you do not need to remove 4 rear screws to clean the filter. Hope you had your steel caps on, and how about ear plugs. These 2 guys are turkeys. Bet they never used one of these tools on the job 😡
I wish your camera person wasn’t sporadically jumping from here to there then there oh and now they return after you’ve finished demonstrated segment you’re explaining
Probably should advise that there are 4 screws at the nose and the two that need backing off are the deeper two! Had to find this out from another Paslode youtuber!
Too easy. Thanks for the helpful advice. Saved myself $100 each time I send it in for servicing. Don't know why I didn't do this earlier. My gun had a lot of gunk inside but clean as a whistle and works perfectly. Now I can service it more regularly. Thanks a lot!
I want to buy that unit problem were to buy fuels and nails
Don't forget your safety glasses 😂
Brake parts cleaner works good to clean everything out also and wd 40 to oil
i just got one of these. thanks for the vid. will take mine apart sometime with the help of this :)
Yeah I mean the safety glasses will do the trick. Never mind it's a brand new pasload
Important to return the cylinder to the rest position after cleaning or it won't fire, found that out the hard way...
Excellent video very clear and easy to fallow
these two the new Artificial Intelligence bots
I bought this nail gun as we were planning to renew all the fencing in our back garden. As this involved 19 double slatted fence panels, 10 of which needed to be cut down in size, we knew there would be a need for a great ruclips.net/user/postUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt deal of re-stapling the wooden slats to the wooden framework. Each alteration required the re-stapling of 62 wooden slats with double staples. Prior to starting the work we ordered sufficient additional staples as per the instructions with the gun.The gun performed fantastically throughout the entire project with no jams of misfires. The adjustable power was excellent allowing the staples to be fired into the 8mm slats to the correct depth. For the price paid this was a bargain and it proved itself to be so reliable and versatile making an arduous task much quicker and professional. I cannot recommend this product highly enough and it will be used on many other projects in the future.
Thank you I325xp just bought paslode cf325xp used from builder who used it once I had to drive over one hundred miles and back. Can I use other nails then paslode? I am happy with these video's and glad to learn from experience. Pete
Great video
Thanks for video,
Thanks for the video, it gave me the confidence and knowledge to service both this gun and my angled Bradder.
One question, how do you clean the "Spark plug "?
Do you just take the cap off and spray the degreaser?
Might be more useful to demonstrate cleaning a used dirty gun...
That's the first thing I thought as well 😂
i guess Im randomly asking but does anyone know of a trick to get back into an instagram account?
I stupidly lost the login password. I appreciate any tricks you can offer me.
@Ty Diego Instablaster :)
One of my capscrews is just rotating and I can’t actually get the cap Off, any suggestions?
How many people wear safety glasses when cleaning a nail gun? Only these 2.
Awesome
Should say how to clean a new gun .ive cleaned 20 or more and they never look like what these boys are doing ,and their hands are soo clean
Good as new
The screws have to come out of the safety plus 2 more behind them on my model, it’s a brand new gun.
I highly doubt that gun has been used..
I cant for the life of me get my cylinder head apart from the rest of the gun. I assume alot of people have this problem after they actually use their gun for 10k nails so any help would be greatly appreciated
I have the same issue
@@Seqhael do you guy have the correct 2 screws from the nose removed? its the 2 recessed ones you need to remove.
Yeah haha I checked the manual and sure enough, had a couple more screws to remove. Must have been a different model to the video.
I understand that green is charged and red is going flat battery. What is it when you get green and a half flash red, but the battery is full, and it's a brand new battery
This just happened to me after cleaning, did you find out what it means?
can you help me
Anybody can clean a clean unused tool! Clean a dirty one and see if you can make it work!!
Oh yeah make sure and use that whole can of degreaser cause we didn’t buy it anyway.
Not a very good demonstration of which screws to remove at the front. You could either show them in the video OR mention to 2 out side screws. Not the middle 2.
Very poor camera work in close ups. Nice hands, heads, but not where the oil is going.
Now to sort out how to reassemble the bits I took off by undoing the 2 screws at the front 😡
Why are this tools cleaning a new gun??
My paslode flashes green and blinks red every 10 seconds , is this normal?
electrician154 Low battery
Mine does that aswell
It means the battery is almost flat and needs a charge.
That looks like his boss overseeing what he is doing. Good video though
Emmanuel 👀
Jesus paslode it’s a new gun not a used gun
Can see these guys don’t read the comments.
If they did they would re record this video.
Many comments about which of the 4 screws at the front to remove.
Also you do not need to remove 4 rear screws to clean the filter.
Hope you had your steel caps on, and how about ear plugs.
These 2 guys are turkeys.
Bet they never used one of these tools on the job 😡
I wish your camera person wasn’t sporadically jumping from here to there then there oh and now they return after you’ve finished demonstrated segment you’re explaining