I see a few comments saying that this gentleman did not explain that this was only for a Canon and not for Nikon. If you watch the video and listen, he states, to make sure that you get the correct mount to fit a Canon or a Nikon. He goes on to stress this point in his presentation. I will be ordering one of each very soon as I use Nikon and my husband uses Canon. Great presentation thankyou. But you do need to answer the questions you are being asked.
Ok...so there's rumours this works on the Nikon cameras too, I can't confirm as I got none, but I CAN CONFIRM it works with the Fjifilm! I was just about to sell my flash after selling my Canon DSLR, but then just for the fun of it I put it on my Fujifilm X100T, and it works! Not just manual mode, but ETTL works too, on Commander mode. Wow. Great flash unit.
Does it require the YN622 receiver to operate in remote TTL operation, or does it have a built in receiver? I'm presuming that the infra red and optical flash slave settings are manual only..?
Thanks for the video. I have a small question if you have time. I a bough yn-568ex ii last month for my canon. And now i'm planning on buying yn-622c-tx and two yn-622c ii 's and another flash. I need the second flash also to be TTL. Do I need a 568EXii or are there any cheaper solutions for a slave?
i purchased 4 560 iv flashes to do multi flash setup for humming birds but unfortunately didn't check for high sync option. I'm curious to know if i can get one of these and slave the rest of them to get multi flash or not.
+Supreet Sahoo - All you need is one highspeed synced flashun and all the others will work via their built in optical triggers. If you set them to S2 and at full power then your HS flash will fire all the others at the first pulse and their flash duration is long enough for your shutter to finish working its way across the sensor. I regularly use this technique with a Canon 580 EXll flash and three YN560 single contact flashes with no problem. This also works my Elinchrom DLite-2 studio head as long as it's no more than 1.5mtr distance and again set to full power.
Hi there, I have one of these flashes and they are great. However, when I cycle through the power ratings from 1/1 to 1/128 power the photo's exposure does not change. What I mean by this is that each photo looks exactly the same as if I haveent changed any settings. My camera is in manual and obviously the flash as well. All the photos just look the same until I change the in-camera exposure settings or aperture. Can you maybe help?
+Josh Fourie I guess your camera s set to auto ISO in the menu. Quite a few of the Nikon owners in my camera club get this problem. The answer is in the camera menu somewhere.
Привет, надеюсь на вашу помощь, имею вспышка yn568ex 2 и Canon 600d, работало все хорошо, но во время одного мероприятия состоялся или глюк или я что-то случайно не то сделал - когда я меняю настройки вспышки - мощность, зум, меняю - ручной режим, Е ТТЛ, стробоскоп (хотя его я и не использую) - мощность вспышки НЕ МЕНЯЕТСЯ. Лупит все по максимуму (там 1 к 1), быстро перегревается. Вспышка становится очень горячим, батарейки как вынул, в руках нельзя держать. как изменить мощность вспышки, на 1 до 16 или до 32 никак не могу :( Буду очень благодарен за помощь, спасибо !!!!!
HELLO SIR, SIR I WOULD LIKE TO KNOW HOW TO USE YOUNGNUO 568 EX ll as a master flash? sir iam using canon 70D AND 6D, I would like to use youngnuo as a master flash on my Dslr.and other flash i have a canon 580 ex ll. i would like to know simple way how to do setting on dslr and on flash. if you help me sir simple way.i will very great ful to you sir..please help me....Sir.
+Durga - You can set either flash to master and the other flash to slave. When the camera flash fires anywhere in the same room / hall the other flash will fire. Outdoors it will have to point at the red sensor window on the slave flash, which in turn is pointing at your subject. Set out the group to 'A' on both flashes, then set whatever power you need, or leave the slave on ETTL.
(I'm an asian just like this guy, but a bit surprised as he phrases quite a fluent-natural command of English whereas is with very strong Chinese accent.)
I see a few comments saying that this gentleman did not explain that this was only for a Canon and not for Nikon. If you watch the video and listen, he states, to make sure that you get the correct mount to fit a Canon or a Nikon. He goes on to stress this point in his presentation. I will be ordering one of each very soon as I use Nikon and my husband uses Canon. Great presentation thankyou. But you do need to answer the questions you are being asked.
How is the Yongnu YN565EX III compair with this review?
Why don´t you tell us HOW TO use it??? what you said it´s in the manual.
+1
I am surprised at the lack on engagement from this company to comments
Ok...so there's rumours this works on the Nikon cameras too, I can't confirm as I got none, but I CAN CONFIRM it works with the Fjifilm! I was just about to sell my flash after selling my Canon DSLR, but then just for the fun of it I put it on my Fujifilm X100T, and it works! Not just manual mode, but ETTL works too, on Commander mode. Wow. Great flash unit.
If you don't need TTL through hotshoe, any flash works with any camera that has a hotshoe
Does it require the YN622 receiver to operate in remote TTL operation, or does it have a built in receiver? I'm presuming that the infra red and optical flash slave settings are manual only..?
can you have a video on this product for nikon
Thanks for the nice review. If I want to use this flash off camera (with an EOS R), whatt trigger system would you recommend? Thanks
Thank you so much for your review. Is that work on Canon 6D?
Very useful description about this flash. Thanks.
Hello Master! can I used my YN 560 TX to command this? or only the 560 IV and 560 III? Please advise so I can buy.
what is the difference between this and YONGNUO YN-565EX II TTL ?
Can i use this flash as multi mode with yn 560iv?
I have the same flash but it's not working wireless only built in camera working what is the solution???
Thanks for the video. I have a small question if you have time.
I a bough yn-568ex ii last month for my canon. And now i'm planning on buying yn-622c-tx and two yn-622c ii 's and another flash. I need the second flash also to be TTL. Do I need a 568EXii or are there any cheaper solutions for a slave?
which flash has TTL Master High Speed Sync and able to use a battery power pack
i purchased 4 560 iv flashes to do multi flash setup for humming birds but unfortunately didn't check for high sync option. I'm curious to know if i can get one of these and slave the rest of them to get multi flash or not.
+Supreet Sahoo - All you need is one highspeed synced flashun and all the others will work via their built in optical triggers. If you set them to S2 and at full power then your HS flash will fire all the others at the first pulse and their flash duration is long enough for your shutter to finish working its way across the sensor.
I regularly use this technique with a Canon 580 EXll flash and three YN560 single contact flashes with no problem. This also works my Elinchrom DLite-2 studio head as long as it's no more than 1.5mtr distance and again set to full power.
How do you put it in slave s1 or s2? Will this work in slave mode if I'm using an Indra 500 as the master flash ?
Hi can I download a pdf manual yn 568ex II thanks
568ex II is for canon, and 568ex for nikon?
Can I control this flash with my youngnou 560tx controller
This or the YN658? What are the main differences?
is it works as off camera ttl for nikon d7100?
Great job. Just the information I needed. Most likely will make the purchase.
Excellent job, straight to the point no bullshit
HI YN568EX 11 WILL IT WORK WITH A CANON 80 D
How do i pair it with my 560tx controller?
would this work for Sony a57 or need adapter ?
My bounce card won't stay up. Does anyone have any suggestions?
Thanks
Hiw much this cost bro???. Please reply me..
Hi there, I have one of these flashes and they are great. However, when I cycle through the power ratings from 1/1 to 1/128 power the photo's exposure does not change. What I mean by this is that each photo looks exactly the same as if I haveent changed any settings. My camera is in manual and obviously the flash as well. All the photos just look the same until I change the in-camera exposure settings or aperture. Can you maybe help?
+Josh Fourie I guess your camera s set to auto ISO in the menu. Quite a few of the Nikon owners in my camera club get this problem. The answer is in the camera menu somewhere.
do you have Nikon version of this available for selling in your website? if so, please reply with a link. thank you.
I have one sitting in front of me for my D750 Nikon, and it works just fine. I got mine on Amazon, long before seeing this video.
can i use his flash on canon 7OD ( master mode / ttl ) ?
thank you
Привет, надеюсь на вашу помощь, имею вспышка yn568ex 2 и Canon 600d, работало все хорошо, но во время одного мероприятия состоялся или глюк или я что-то случайно не то сделал - когда я меняю настройки вспышки - мощность, зум, меняю - ручной режим, Е ТТЛ, стробоскоп (хотя его я и не использую) - мощность вспышки НЕ МЕНЯЕТСЯ. Лупит все по максимуму (там 1 к 1), быстро перегревается. Вспышка становится очень горячим, батарейки как вынул, в руках нельзя держать. как изменить мощность вспышки, на 1 до 16 или до 32 никак не могу :( Буду очень благодарен за помощь, спасибо !!!!!
Link to the subtitle please
hey, can i use it for Sony camera? I'm using a6000 and a7II. thanks
GBlaugrana no you can't. its only for nikon and canon
CAN.T USE A POWER PACK YN-568EX II
How can i turn off the laser thing?
tape
Where can i buy this flash for nikon
ebay
HELLO SIR,
SIR I WOULD LIKE TO KNOW HOW TO USE YOUNGNUO 568 EX ll as a master flash?
sir iam using canon 70D AND 6D, I would like to use youngnuo as a master flash on my Dslr.and other flash i have a canon 580 ex ll.
i would like to know simple way how to do setting on dslr and on flash.
if you help me sir simple way.i will very great ful to you sir..please help me....Sir.
+Durga - You can set either flash to master and the other flash to slave. When the camera flash fires anywhere in the same room / hall the other flash will fire. Outdoors it will have to point at the red sensor window on the slave flash, which in turn is pointing at your subject. Set out the group to 'A' on both flashes, then set whatever power you need, or leave the slave on ETTL.
Thanks to you Sir for great advice 👍
(I'm an asian just like this guy, but a bit surprised as he phrases quite a fluent-natural command of English whereas is with very strong Chinese accent.)
great
عفيه بالسبع
Limited info, nice sales pitch bud.
I thought it was an OK presentation!
Not not really a review, more a description. 3 minutes Ill never get back.
This guy is drag, he say that YN-568EX II is for Nikon and canon???,
This is bullshit YN-568EX II is only for canon.
not true, i have 1 for nikon
send me the link to buy it, if you have one ex 2 for nikon dude,
No you were right, dealer put wrong info on everything. EX ii is only for canon
I ordered and now im sending back
Not your fault, this guy should know better otherwise he shouldn’t make product presentations