God has said in the Quran: { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) Quran
... молодец!-, отличный получился у тебя вибратор, буду себе такой-же делать, летом буду заливать фундамент своего дома, здоровья тебе и удачи во всём, новых творческих успехов!!!
@@tezzah2222 I don't think any woman would put this anywhere near their sensitive bits.. unless it had a silicon sleeve/padding for the end/tip. Even with that, it's still probably just too much to handle for 99.9999% of women. I wont lie though, I had the same thought lol.
Nice build! It has one big advantage over factory units: you can control the speed and with that the intensity of the vibration. Can be useful if you have to be careful not to demolish the concrete form.
Пошёл в строительный гипермаркет, там купил такую насадку для вибратора бетона. И приспособил к электродрели, сварив переходной крепёж. Не стал заморачиваться с полным изготовлением.Промышленная насадка запускается в режим вибрации, только при ударе колбы о что-то твёрдое, а так просто вращается без вибрации. Хорошая затея изготовить самостоятельно, если негде купить как запчасть.
@@pro__moto5403 Прям знал, что найду такой комментарий. С заказчиком(девкой) шлялись по строймаркету, она такая: А что это и зачем? Ну я возьми и ляпни про погружные вибраторы. Стоит, мордашка красная. А стяжку вибрировать будет надо и фундамент под хозпостройки тоже. И спросил: держала в руках такой? Пользоваться умеешь?
Nice build. I've got an old Porter Cable belt sander that I'm going to modify and build into one of those sanders. It's such a great tool. I'm currently building a small version of a concrete vibrator for small moulds - sculpture and restoring vintage stairs with complex forms/tight spaces. Too many DIYers and even contractors skip that part of the process, and things fail after a new upper Midwest winters because of it. My neighbor spent $5K on a new set of front steps, which already have cracks and failures. It was totally avoidable. Sad.
Great idea and build! Very functional. I'm confused on one part, why at 1:15 did you weld on the threaded half nipple to the pipe? Why did you not just cut the pipe that much longer and thread the end? Did I miss something? Thanks!
Is it still working. The wire rope has counter clockwise twist, and driving it clockwise will untwist it. How many hours of real concrete vibrating has this tool done?
I know this is old but no one answered your question so I will. He ran drill in reverse so it would have same spin as cable. Looks very durable and well sealed. Should last for quite some time with no maintenance IMO.
@06:54 you should have covered that in pure silicone grease. WD-40 is not suitable for this, as it gums up and stops lubricating quickly. Other greases might work, but they also might break down the plastic or rubber inside. Otherwise, this is great!
Very Ingenious and Cool. Apart from the lathe, you made it with all the tools the everyday man would own (welder inc). I would love to have a lathe and milling machine, but don't have the space, nor the funds, to do so. I have subscribed to your channel for 2 reasons. 1, You made something very useful and cool and 2, you more or less made it with the tools I own. Thank You ! :-)
If you ever find the space and money - get a mill first! It's very easy to do basic lathe work on a mill but much harder to do basic mill work on a lathe in my experience.
Parabéns. Vídeo excelente. Excelente explicação. Vai ajuda muito os pedreiros, autônomo . Na hora de concretar pilar e vigas Dando um acabamento perfeito . Mais aderência do concreto ,no ferro. Na massa do concreto é bom de usar rebotec. Pois ajuda muito na impermeabilização do concreto,contra umidade do solo.. Obrs usamos o rebotec na massa. Ficou perfeito. Não passa umidade na viga. Vale apena comprar.
Nice DIY. In fact we are going to construct a house in Rural area and the contractor may not have the vibrator. This has given me a real chance to make one for myself. How about explaining the details of spares used?
verry cool idea aspecially the metal cable in the hydraulic / gas hose part , never considered that , the welds on the vibrator shell needs to be watertight as any concrete water manage to get in there it will lock the thing up solid
Maravilloso desafío de Sabiduría, Dios bendiga su Vida y Familia, y muchas gracias por compartir su creación técnica para todos nosotros en el área de construcción y otros servicios.
You earned the subscribe! Awesome to watch this build. I'm wanting to make a walk behind compactor in the next year or two. Jack hammer too... so I don't think I'd use a jumping jack tamper/compactor though the thought has crossed my mind. Completely different... though this vibrator is more like the walk behind plate compactor. Really neat to see this design and construction. Thanks for sharing!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
*Friends support the channel with a subscription, there will be a lot of interesting things*
8
Man, you are handy! 🤙🏼
God has said in the Quran:
{ O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
[He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
Quran
Ok
문형택Ŕŕrŕrŕrŕŕŕ
Thank you, I made one for my wife, she sends thanks!
😀😀😀
С размером не ошибся?
😂😂😂
Legends knows
underrated comment
... молодец!-, отличный получился у тебя вибратор, буду себе такой-же делать, летом буду заливать фундамент своего дома, здоровья тебе и удачи во всём, новых творческих успехов!!!
А можно не заниматься херней, а купит в леруа мерлен заводской.
и не приваривать кусок трубы с резьбой, а нарезать резьбу на целиковой трубе.)))
а можно просто взять в аренду качественный заводской и не изобретать велосипед.
@@BamBamov Тоже хороший вариант. Если есть где.
Кто скажет что за шланг используется? РВД или что-то другое? Размеры хочу узнать
Браво!!! Для дома лучше и не придумать.Классное видео! Спасибо!
Excellent job! This concrete vibrator is a perfect size for concrete counter tops, fence post and deck footings and much more.
Thanks
@@Mr.Craftsman Don't show your wife!
@@tezzah2222 I don't think any woman would put this anywhere near their sensitive bits.. unless it had a silicon sleeve/padding for the end/tip. Even with that, it's still probably just too much to handle for 99.9999% of women. I wont lie though, I had the same thought lol.
@@dojostarfox4520 you've obviously give it a test run by the sounds of it LOL
Tout.compri.il.faut.le.materilles.qui.coutte..pour.fair.une.guadjette😅
Nice build! It has one big advantage over factory units: you can control the speed and with that the intensity of the vibration. Can be useful if you have to be careful not to demolish the concrete form.
Interesting. Don't they make them with variable speed?
Пошёл в строительный гипермаркет, там купил такую насадку для вибратора бетона. И приспособил к электродрели, сварив переходной крепёж. Не стал заморачиваться с полным изготовлением.Промышленная насадка запускается в режим вибрации, только при ударе колбы о что-то твёрдое, а так просто вращается без вибрации. Хорошая затея изготовить самостоятельно, если негде купить как запчасть.
Супер. Автору милион лайков ,спасибо за урок!!!!
Скажите, зачем эта штука нужна? Ну и еще мне интересно чему вы научились из этого видео?
@@povorotnetuda2019 К примеру из бетона выбить воздух. Или эпоксидку утрясти
@@alexeiexe ИЛИ ЖЕНУ ПОРАДОВАТЬ СУМАСШЕДШИМ ОРГАЗМОМ.
@@pro__moto5403 Прям знал, что найду такой комментарий. С заказчиком(девкой) шлялись по строймаркету, она такая: А что это и зачем? Ну я возьми и ляпни про погружные вибраторы. Стоит, мордашка красная. А стяжку вибрировать будет надо и фундамент под хозпостройки тоже. И спросил: держала в руках такой? Пользоваться умеешь?
Good idea and well done, but WD40 does not smear! Better to use oil..
Thats what she said
Отличная работа.
Great job.
Хорошая работа! Спасибо за идею.
Something in RUclips works! Very nice job!!!
You are a genius . BRAVO !!!
Amazing idea my friend 👏👏
Nice build. I've got an old Porter Cable belt sander that I'm going to modify and build into one of those sanders. It's such a great tool.
I'm currently building a small version of a concrete vibrator for small moulds - sculpture and restoring vintage stairs with complex forms/tight spaces.
Too many DIYers and even contractors skip that part of the process, and things fail after a new upper Midwest winters because of it.
My neighbor spent $5K on a new set of front steps, which already have cracks and failures. It was totally avoidable. Sad.
I love the design. Simple , practical, and very useful for the DIY guys. Will take me sometime to make it but it will be fun to try. Thanks.
Y corta para luego soldar !!!! Vaya que si esta bien pendejo !!!!
On your boyfriend. I'm sure he will enjoy it 😂😂
My wife loves this, thank you
Great idea and build! Very functional. I'm confused on one part, why at 1:15 did you weld on the threaded half nipple to the pipe? Why did you not just cut the pipe that much longer and thread the end? Did I miss something? Thanks!
the welded pipe is slightly larger to accept the bearing, i think
That was my thought also.
because he did not have a pipe threading machine. But you can buy those nipples from the store.
The idea behind the vibration is awesome.
Really nice job, very well thought out and engineered
very nice idea thanks for sharing this video
Ficou show de bola topdlinha, com certeza vo fazer um
Tô nessa msm visão porém com um mangote maior
Why not just thread the pipe instead?
Veri veri naic and super
Is it still working. The wire rope has counter clockwise twist, and driving it clockwise will untwist it. How many hours of real concrete vibrating has this tool done?
I know this is old but no one answered your question so I will. He ran drill in reverse so it would have same spin as cable. Looks very durable and well sealed. Should last for quite some time with no maintenance IMO.
Dude, you can just replace the steel rope when its broken. Its a lot cheaper than a commercial tool.
Felicidades muy buen inventó
Bom dia ficou muito bom parabéns pelo o seu trabalho 👍👏
Can be use for multipurpose
@06:54 you should have covered that in pure silicone grease. WD-40 is not suitable for this, as it gums up and stops lubricating quickly. Other greases might work, but they also might break down the plastic or rubber inside. Otherwise, this is great!
can you test it with concreta please?
Very Ingenious and Cool. Apart from the lathe, you made it with all the tools the everyday man would own (welder inc). I would love to have a lathe and milling machine, but don't have the space, nor the funds, to do so. I have subscribed to your channel for 2 reasons. 1, You made something very useful and cool and 2, you more or less made it with the tools I own. Thank You ! :-)
If you ever find the space and money - get a mill first!
It's very easy to do basic lathe work on a mill but much harder to do basic mill work on a lathe in my experience.
Kamaayo gyud nga idea.
Parabéns.
Vídeo excelente.
Excelente explicação.
Vai ajuda muito os pedreiros, autônomo .
Na hora de concretar pilar e vigas
Dando um acabamento perfeito .
Mais aderência do concreto ,no ferro.
Na massa do concreto é bom de usar rebotec.
Pois ajuda muito na impermeabilização do concreto,contra umidade do solo..
Obrs usamos o rebotec na massa.
Ficou perfeito.
Não passa umidade na viga.
Vale apena comprar.
Useful idea thank you ❤
Ladies, this is not a toy.
my wife loves it! thanks!
Whoever this Concrete woman is, she's in for an fun time....
Gonna need some extra batteries too
!!!!!yes!!!!
"О да"-сказала она, уведев его, с этим в руках. 😂😂
Ha! I was thinking the same thing.
Im here for the comments as soon as i saw this title!
Thank you for sharing !
Would have been great to see it working in concrete, like 1 slump!
ස්තුති ඔබට .
ඔබෙ හැකියාව දියුණුවට පත්වෙවා
👌🌻🌻🌻
THANK YOU, THANK YOU, THANK YOU!!
Nice DIY. In fact we are going to construct a house in Rural area and the contractor may not have the vibrator. This has given me a real chance to make one for myself. How about explaining the details of spares used?
Excelente amigo
great vibrator, you can really make the water bubble. 😎😍🤗
Wonderful skill to put together all this! great project, congrats!
Beautiful build ... can't do it though as l lack a lathe -- 😟
How does the vibration work? Is anything touching the tube inside ?
Respect for you Man.
Nice work. We shared this video on our homemade tools forum this week 😎
Muito perfeito seu trabalho parabéns 👏🏿
loved it. good for lab scale vibrator
Fue uno de los mejores videos que pude ver me gustó mucho lástima que sea en inglés y no en español
Excellent. And with wife approval factor.
Good Video, but Fail at 6:27 : Missing Srcew Safety with Glue oder welding, THE SCREWS WILL LOSSE VERY QUICKLY
thanks, my wife will be very pleased with this
Действительно и неважно на каком языке говорит мастер,сделал молча чётко,мнебы на стройке пригодился.
Так мастер говорит на русском..это видео с канала Техас тв
"Если вибратор не лезет в опалубку" - гугли. Они там слегка сдурели, но метод ебать стены перфоратором - рабочий.
Ненадо некаких коментов. Отличное муз сопровождение. Для технаря четко и ясно. Молодец мужик. А для оргазма у ее жены есть свой пальцы🤔😁😂
Excelente la idea saludos desde panamá👏🙋♂️🇵🇦
Супер!!!я себе похожую сделал,только во внутрь еще налил масло и вибрация усилилась....
Сколько масла налил?
@@1_Vladi-Mir залил до верхнего подшипника...
@@vikvik2522 спасибо
❤ Thank you for your help
Good. But two points need to be done differently. Place the cable mounting screws on the thread retainer. Use a dense lubricant for the cable.
Excelente. Saludos desde Chile.
great,,, its the off-set on the iron which does the magic.... i made one a bit longer ,,, i welded the cabel to the iron ...
verry cool idea aspecially the metal cable in the hydraulic / gas hose part , never considered that , the welds on the vibrator shell needs to be watertight as any concrete water manage to get in there it will lock the thing up solid
Very interesting, congratulations!
1
TMEOIi
Maravilloso desafío de Sabiduría, Dios bendiga su Vida y Familia, y muchas gracias por compartir su creación técnica para todos nosotros en el área de construcción y otros servicios.
I made one of these and my gf uses it more than I do. Pretty odd that she has so much concrete to vibrate...
Went looking for this
Well now she doesn’t need you to do the work. Just be careful and don’t get drunk and pass out. She just might try it in your post hole.
Muy útil. Gracias por publicar.
V good production. Its a new business too for the time being.
Felicitaciones , gran trabajo y explicacion , un abrazo desde Uruguay.
Все очень аккуратно сделано!
Что это я непониль
Cool work thanks for my DIY knowledge congrats
I came for the comments.
Жене такой сделаю! Спасибо за идею!
Semplicemente 🔝🔝👍
Thanks for the video, very useful tool.
A veces nesecito uno para algunos trabajos tratare de hacer uno a ver si me sale
oies hermano!!! Disculpa mi ignorancia, pero..... para que sirve eso que hizo este amigo???? :O
@@albertoaguilar989 eso se usa para acomodar el concreto cuando se vierte en un molde por medio de la vibracion
@@josewagostolopez7510 oooorale!!!! nooo psss cada dia se aprende algo nuevo!!! tanks Hermano!!
Not as good as the commercial unit but damn close. Very Ingenious. You are, without a doubt, talented.
calm down ladies, its for concrete.
=))))))))
Hahaha..nice for the LGBT.
😂😂
🤣👍
But it doesn't HAVE to be.
Muy buen trabajo gracias muchas bendiciones
Surprising no ladies in the comments section. Silent watchers. By the way machine seems to be heavy duty.
I can "hear" them on the background though...."Oohhh...ahhh..that's a big one!
Your job is 👍👍 great
I think my girlfriend will like it 😅
And she'll probably kick you to the curb !! 🤓
What's it like in the concrete? does it do the job?
Valentines present?
For you?
You have incredible fabrication skills.
That was simply wonderful. Thank you very very much. That was just I was looking for a long time
Great job well-done simple tools and great hacks must have this one.lathe is the only obstacle
Who needs silicon version?
u are a genius.
Wife will be happy
Uno alante otro atrás y estallara en squirts
Wife will be happy with a gas powered industrial version
Отличная идея!!
7:40 someone has been watching This Old Tony 😁
Well done excellent job
The TOY above all toys!
can this be use for vibrating wall or ceiling?
You earned the subscribe! Awesome to watch this build. I'm wanting to make a walk behind compactor in the next year or two. Jack hammer too... so I don't think I'd use a jumping jack tamper/compactor though the thought has crossed my mind. Completely different... though this vibrator is more like the walk behind plate compactor. Really neat to see this design and construction. Thanks for sharing!
Very good. I will try it too. What thickness cable?
There's a que of ladies around the block.
very nice thank you
Супер!!!
Very creative, can this really mix concrete? =