Very nice, your video inspired me to create my own photo booth instead of renting one. I tested few flashes and diffusers, and I found that a Lambency is in terms of size and light the best option I could get. Cheers!
I really liked the box and the details. One thing though, lately most boxes have the ability to have the camera tilt for taller or shorter people. A setup for a printer would also be helpful to take this to an event.
+DALE SUMMERS Here's the link to a video that talks through the software I use and the tech behind the photo booth ruclips.net/video/E7B-Cj5Ca7Q/видео.html. I don't have it hooked up to a printer, all of the photos are just shared digitally.
I am I the process of building a similar photo booth and I was curious to know if you added any support for the shelf inside the box or if it is just glue and nails holding it up?
The Born Maker. What are the measurements of the case...width, height and depth? I want to make this for my daughter's high school graduation party. I have my uncle willing to make the case. However, he is asking the measurements. I appreciate your help with this.
Great build! Definitely gonna try this. It looks like you had to compensate the size of the top and bottom portion of the box to accommodate the width of the wood, approximately how much did you deduct? I'm assuming an inch because of the 1/2 inch wood used but I know that the saw blade removes wood too my guess is 1/8th of an inch. I'll be removing that portion from the side pieces rather then the top so I can build the box on top of the bottom piece of wood(for added strength) , your thoughts and thanks again this is by far the nicest DIY build I've seen!!
Check out the "tech behind the booth" video in the description for a better breakdown. I just use an app called shuttersnitch to transfer between the camera with an eyefi sd card and the iPad. It doesn't have a live view and there's a few second delay, but it works for my needs. I don't have a printer or anything setup.
I bought remote but it doesn't work because the camera inside the box of the photo booth I need to get the camera out in order to connect with the remote, so is there any solution of this problem..??
Is there a way to put in the iPad without a router safely? i dont have the tools to route a space out yet i want to cover the home button (not the camera though) Thanks 😄
You could probably use 1/4" plywood instead of 1/2" and just cut it out to the size you need. The routing was just so it wouldn't be so deep in the box.
+Amrit Ark just cut the reveal to be the size of the screen plus camera. Make a little ledge for the iPad to rest on and the velcro straps I showed should work.
Great video, this will absolutely help me out in the one I am going to build. Question though, do you use an umbrella for your monolight? Or is your monolight fine to use without any modifiers?
+re ge I use an EyeFi card with an app called Shuttersnitch. Here's a video that goes a little more in depth about the way it works. ruclips.net/video/E7B-Cj5Ca7Q/видео.html
Very nice, your video inspired me to create my own photo booth instead of renting one. I tested few flashes and diffusers, and I found that a Lambency is in terms of size and light the best option I could get. Cheers!
Very nice! Glad to have you back making videos! Big congrats on the reason to be gone for a while :)
Thanks! He should be ready for a backyard zip line in like a month or two, right?
The Born Maker Yeah, but if you build it now, you can enjoy it until then ;)
I really liked the box and the details. One thing though, lately most boxes have the ability to have the camera tilt for taller or shorter people. A setup for a printer would also be helpful to take this to an event.
Bonjour
Comment avez vous connectez le tout?
Et quel application utilisez vous?
Merci
Nice to see you back.
Great video can you please let me know what software works with the ipad and dslr camera much apprectiated.
1st time watcher and i love your creativity thanks for the inspiration
Grats on the baby! Oh and the project was cool also lol
Mate this video is awesome
Nice to have you back!
Great idea for any party, i really like this!
What app u use on iPad? and how connect the cam with llight?
do you sell them Im not good at building it or have the tools
Congrats :) You make great videos (and projects), good to see that you're back!
can you tell me more about the soft ware needed and how to run a printer and connect all the equipment?
+DALE SUMMERS Here's the link to a video that talks through the software I use and the tech behind the photo booth ruclips.net/video/E7B-Cj5Ca7Q/видео.html. I don't have it hooked up to a printer, all of the photos are just shared digitally.
Are you using the Photo Booth App that comes with the iPad?? or what app did you use?! thanks so much!!
Dude, Excellent Job! Love it!
Please How much will you charge to build one?
Hello great video . Can you please share me the dimensions of the box please ?
Hi there , what program did you use on your ipad, i have social booth but doesnt work on ipads / apple products.
also how do you add printer
I love this small photo both concept might just have to make my own!
I am I the process of building a similar photo booth and I was curious to know if you added any support for the shelf inside the box or if it is just glue and nails holding it up?
I love your works
what program are u using
Memories Productions you can use Wifibooth
rich Williams are you running wifibooth?
Great video. How did you attach the camera to the shelf using the tripod mount? Didn't show in the video.
and what app are u using to use the remote shutter ? my shutter release doesnt wokr when dslr is connected to the table.
Were you able to see the photo the camera takes onto the iPad or you used to iPad camera when taking the photos ?
Could you do a video where you include a printer as well?
What type of wood did you use? Please include sizes
Very good work. Can you write all the wooden box measurements
The Born Maker. What are the measurements of the case...width, height and depth? I want to make this for my daughter's high school graduation party. I have my uncle willing to make the case. However, he is asking the measurements. I appreciate your help with this.
I could really use an answer to this question! Trying make one of these happen!
Great build! Definitely gonna try this. It looks like you had to compensate the size of the top and bottom portion of the box to accommodate the width of the wood, approximately how much did you deduct? I'm assuming an inch because of the 1/2 inch wood used but I know that the saw blade removes wood too my guess is 1/8th of an inch. I'll be removing that portion from the side pieces rather then the top so I can build the box on top of the bottom piece of wood(for added strength) , your thoughts and thanks again this is by far the nicest DIY build I've seen!!
what kind of photo printer did you use with your photo booth?
Would I need a wi-fi SD if my camera has already built in wifi I have the T6i ? And what printer do you use ?
I did not see the printer, how to do what you did and also add printer to have those printed right after the session?
I'm thinking of building this same set up, how or what app did you use to sync the iPad with the dslr, does the iPad show a live view? Thanks
Check out the "tech behind the booth" video in the description for a better breakdown. I just use an app called shuttersnitch to transfer between the camera with an eyefi sd card and the iPad. It doesn't have a live view and there's a few second delay, but it works for my needs. I don't have a printer or anything setup.
How you connect tab and dslr
Is it possible to print the taken photos?
I bought remote but it doesn't work because the camera inside the box of the photo booth
I need to get the camera out in order to connect with the remote, so is there any solution of this problem..??
Is there a way to put in the iPad without a router safely? i dont have the tools to route a space out yet i want to cover the home button (not the camera though) Thanks 😄
You could probably use 1/4" plywood instead of 1/2" and just cut it out to the size you need. The routing was just so it wouldn't be so deep in the box.
How can I prevent the ipad from falling out though? Great idea by the way (:
+Amrit Ark just cut the reveal to be the size of the screen plus camera. Make a little ledge for the iPad to rest on and the velcro straps I showed should work.
Thank you so much! Can't wait to make one and hopefully it will look good! Im new to woodworking (ish) but i am going to get help from my teacher (:
Bonjour quel est la dimension de la boîte merci
Very Nice!
its cool , but what's really like the difference between this and using the tripod?
how to connect ipad and dslr? and how to printer this ?
What did you used to cut out the area for the screen to show. Excluding the area that you routed out.
I just used a jigsaw to cut the opening.
Hahaha
You should have playlist 😄
Great video, this will absolutely help me out in the one I am going to build. Question though, do you use an umbrella for your monolight? Or is your monolight fine to use without any modifiers?
Chroma Entertainment I just set the exposure for use without modifiers. It’s a little harsh but works with the photo booth style.
The Born Maker thanks for the fast answer!
Great video! Do you have to use a DSLR? and can I use wires to connect everything together with a Canon HS510 ?
Hello
I am making this for sisters wedding but I need to know the dimensions!
Is there anyway I could get them from you?
He gives dimensions at about 1:25. But yours will depend on your equipment. (iPad versus another tablet type, etc.)
hi there, nice video... what photbooth software did u use? thanks
+re ge I use an EyeFi card with an app called Shuttersnitch. Here's a video that goes a little more in depth about the way it works. ruclips.net/video/E7B-Cj5Ca7Q/видео.html
awesome great ideal thanks for sharing.
Good morning can I buy one off you I'm using an iPad mini 4
Can you make me one of those boxes? I don't have all those fancy tools. If so, how much for the box? Thanks..
Which Tripod did you used?
What was the material that you used to cover the box with?
+Kenny Tong I used some black felt that I got by the yard at a fabric store. I don't remember if i ended up getting 1 or 2 yards of fabric.
What program to use Photo Booth ?
How much you charge to build the one photo booth box
So how do you connect a DSLR to an Ipad?
how do you print that sir?
how do you connect to a printer?wireless?
El programa sí ce puede instalar en iPad ???
How you connect the 60D with your iPad ?
+IcreaktivI I've got a video that explains how everything works - ruclips.net/video/E7B-Cj5Ca7Q/видео.html - hope this helps.
how do you connect to a printer ?
What's the name APP tablet?
Psh, FINALLY!
How much would it cost me for you to make one for me
are you selling the photo booth?
I do! Feel free to contact me at thebornmaker@gmail.com.
Hello . I want to ask you if you can make one for me and buy it from you I am from Saudi Arabia
What is the dimension of the box?
Measurements are 14" wide x 16" tall x 11" deep.
+The Born Maker Is there somewhere I can go to download the specs for this booth?
Grown Folks Tv Not yet. I'm working on a website for future project docs. I just sort of went for it on this one.
EXCELLENT Video!
#ThankYouForSharing
hi,
do you can ad printer ??
but how if i want to direct print?
Use other ipad alls and use a printer and stufd
👏👏👏😎🙌
Do you sell? 🤗🤗
In my company we have reality photobooth i like thankyou
Hi
Free Guide to starting your Photo Booth Business: www.rentalphotobooth.ca/start-photo-booth-business
+banjotown muziek
I made one myself! Thank you! imgur.com/xAAaG8B
+Goolie22 That's awesome! Would you mind if I put the picture on my website?
+The Born Maker of course! It is your creation anyway!:-)
+The Born Maker by the way I have used only simple tools like cordless drill, handheld sawblade, some sandpaper, a dremel, so anybody can do it!
Hi there. Sent you an email!
Cheers
or you could just take a front facing self portrait.
What kind of tool did you use to make the opening for the ipad?
how do you print that sir?