Greetings R4ul, very nice job. I think to do same on my audi a3 2009 2.0 tdi 125 kw. One question, do i need diagnostic tool when unplug/plug wire from throtle body for adjusting again throtle position? Thx ;)
Sorry if I missed that bit but it's so easy. Take everything off when the EGR VALVE comes off you can get to the plug easily then just push the plug on the top and pull it off. Make sure before fitting the EGR VALVE plug the wiring plug on first.
thank you this helped a lot! only thing is the cheap EGR's don't last, also make sure you clean the intake too whilst your their
I find these videos so therapeutic haha! Smashed it again my bro 💪
Nice one bro
Nice Job men
Thank you for this.
Thanks for watching really appreciate it
Perhaps this will fix the P0404 fault code the car showing. The glow plug light keeps flashing and the car is in milk mode.
good helpful video
Very good
Greetings R4ul, very nice job. I think to do same on my audi a3 2009 2.0 tdi 125 kw. One question, do i need diagnostic tool when unplug/plug wire from throtle body for adjusting again throtle position? Thx ;)
I dont think so
Nice video but how do you unplug the electrical connector from the EGR, please?
Sorry if I missed that bit but it's so easy. Take everything off when the EGR VALVE comes off you can get to the plug easily then just push the plug on the top and pull it off. Make sure before fitting the EGR VALVE plug the wiring plug on first.
Hi. What is the normal RPM on this car ?
Do
You need to basic setting or adaption after you replace it?
No really if the engine management light is on just reset it
Do you need to code the new egr to work properly?
Not really it should be good to go as soon as you fit it