2020 Husqvarna 701 SM Fuel Dongle Install/Review (Wheelies!)
HTML-код
- Опубликовано: 12 июн 2020
- Thanks for watching! More content to come!
Merch available at:
www.motolifemediamerch.com
www.motolifemediamerch.com
www.motolifemediamerch.com
My bike:
2020 Husqvarna 701 SM
My oil amzn.to/2Sj3XBN
Fender Eliminator amzn.to/35cAOxA
Seat cover amzn.to/2VM5vqh
Tusk shift lever amzn.to/3bRJM4R
Clutch Reservoir cap amzn.to/2Xoqqz3
Camera:
Hero 8 amzn.to/2VLQ4hF
Media Mod amzn.to/35goFHU
Rode Lav GO Mic amzn.to/2YgjKFe
2.7k 60 fps
My gear:
White Fox V1 amzn.to/3bPaiwu
Sena 20S amzn.to/2KF63b8
#husqvarna #701 #motovlog #2020 #rottweiler Развлечения
The little compartment on the left side is for the toolkit that came with the bike. Thats why you have a nr 3 or 4 allanskey under your seat to be able to access it👍😊
!!!VERY IMPORTANT!!!
For the EU guys wanting to buy this dongle, with the newer Models the Euro 5 and up this doesnt work anymore since the O2 sensor has a closed loop.
So once it detects anything wrong with the mixture it will overwrite and adapt to the current riding situation, same thing with the Power comander you wont be able to programm pops and bangs anymore you'd have to do a ECU flash.
Greetings from Germany
From which year? I just got a 2021, will it work on that?
Just ordered one got here today, abt to install We need another 701 on the channel !!!!
Love your vids on the 701 keep it up 👍
Thank you!
after ecu remap you can do 3 gear . The euro emission choke the engine
Hey man, I just got the 2020 enduro, I got happy when I seen these mod, but you started talking about the supermoto model can’t really do a third gear wheel, my enduro will pop a 5th gear wheelie no problem, I had a 6th gear doing 88mph, I think the enduro is tune better then the supermoto model. Only mod I have is after market exhaust. And I’m pulling power 5th-6th gear wheelies on the interstate no problem, can’t wait to see the air box mod! Keep it up 👍
Nice! Yeah the gearing is way different on the sumo, it can do 80mph in 3rd gear haha. Thank you! More to come
Hey I love your TicTocs and TouTube videos keep it up
Thank you! Will do!
Thank you for the video!! So the what you did is just un-plug and plug in right? But you can also remove the extra tube per se ? TIA!
Im getting the KTM 690 SMCR (2020) in the next couple months. Enjoying your content good ideas on what I can also do to my SM. THANK YOU.
Nice! You'll love it! Thank you
What makes you want the ktm over the husky?
3rd gear clutch ups at 50 mph work like a charm, 3rd gear with no clutch is tough
I just this afternoon installed he dongle on my 2020. 2nd gear power wheelies are silly easy. With the proper body positioning and input, 3rd is good too, but harder, like you said. If you had a kicker, such as a hill, it'd be a breeze. I'll likely drop a tooth up front and add a few in the rear. Then I'll be expecting 4th gear power wheelies :)
The free space is for your tools. There is ja T30 in your seat to get to the tools.
You meet the nicest people on a Husqvarna :P
1:52 this Box is for your on-board tools. You should have got a blue bag with some tools in it, with the bike. Under your Seat you can clip a T-30 Screwdriver wich you need to access the on-board tools.
Interesting! I'll put them in there, that's really cool!
OMG! it all makes since now.I used to think... whats the point of a tool box that I need a tool to get to. The under seat clip was the missing piece of the puzzle. thanks man.
Under the seat there is a place for a T30 only. Just to get access to that hidden toolbox on the left side.
Cool channel! My son was excited to see his RUclips cameo. Thanks! Lol
Thank you! I'd love to link up and make a video with the McLaren sometime! DM me on Instagram if that's something you'd be open to! @chester__anderson
@@TheonlyrealChester absolutely!
What performance mods do you have on your bike and what you recommend?
Your bike should have come with a tool kit. That’s what the compartment is for. I deleted mine when I did the air box and Power Commander V. I see Chester is a player!😂 I don’t blame you!😎
I put the tool bag in! Thanks for the tip🤟🏼 you know it😏
Yeah, it definitely seems like they detune this bike with all the emissions garbage etc. You can feel that the bike has a lot of potential, but stock it only runs ok. Can't wait to do my mods...
Exactly, I cant wait to let it breathe🙌🏼
look good. i hope you do a full exhaust and not a slip on exhaust. love to see more :)
Honestly, you don't gain much at all from an aftermarket header on this bike. Better off putting that $400+ towards intake and power commander
@@agentstarkk you can do both. it looks good and the sound, is to die for
We're all waiting to the full aftermarket exhaust 😁
Me too🙄😂 it's coming soon
Hey have you heard anything about the fuel torque dongle? just wondering how it compares to the rottweiler
Thank you bro 👍👍👍👍❤️👍👍👍
Hey, nice Videos !
I have a question:
is a Power-Commander required after changing the airbox and install a fuel-dongle ?
Did those mods ( fuel-dongle / open airbox ) something on your performance ?
greetings from Germany
Edit: Im asking for the 701 SM
Thank you! I don't think it's required, it would definitely help get the most out of it but the fuel dongle is helping. I would say if you do an exhaust get the PC!
Hello, I have a 701 Supermoto, I need to change the muffler without a catalytic converter, I wonder if this device works or if I should buy a commander
El chapo runs dope in those secret places. Lol
What’s the point in getting the sas canister delete?
So did you hit that?
Nice dude! Is there a problem if you go in different heights? I live in switzerland and here we have some big mountains and I wonder if it could damage the bike?
I don't think so! I'm sure Rottweiler would let you know if that was a problem!
Nice video, I’m fabricating this dongle as I watch your video
Thank you 👊🏽 that's the way to do it lol
Do you remember the resistor values and position? Thanks
what screw do I need to close the o2 sensor hole? what about just leaving the o2 sensor unplugged and just clip in the dongle?
I just left it in, They sell a plug if you want to go that route
Nice video thanks! So is a dongle enough to get the bike to crank up with gas?
I'm finishing my run-in, I'm at 400km, but it doesn't get gas up, neither in map 1 nor in map 2.
Tips?
Thank you
Remove stock air box and put cone air intake
Hey man, been watching your videos on the 701. I know I’m like 2 years late, but do you have a link to the fuel dongle? I can’t find it anywhere online. Rottweiler website isn’t working for me, and I need it.
Fuuuuuuuu.... I would have had 2 O2-killers for my SuperDuke, that I could have used to mod it when I had it borrowed for the yearly tour! Damn!
Nice vids, hows the new 4K computer doin
Can you do a vid on the new bike?
Thank you! Soo Soo much better for editing 😂 it used to take around 6 hours to upload, now it's under 10 mins 😂 yes definitely coming soon! It needs a valve adjustment so I'm waiting on that
where did you buy this links?
How did you turn traction control off? Mine when I go to wheelie it shuts itself down as soon as the front tire comes off the ground
You hold the TC button when youre not moving
The stock throttle linearity is HORRIBLE. I actually looped my 2020 doing a wheelie because it just took off after a 2-3 shift. Legend says my butt is still healing to this day.
Aww man sorry to hear that, but yeah definitely, it's super unpredictable stock. Now mine is much much smoother. I bet that one hurt👀
@@TheonlyrealChester $5800 in damage. I only had it 4 days. I used to wheelie my DRZ400SM for miles and the throttle was super predictable. This thing however . . . I did order a LeoVince pipe, DNA filter and airbox cover, PCV and the dongles from Rottweiler and the SAS/Canister delete too so it should rip pretty good. What pipe are you gonna run?
@@kurylajarod damn....👀 That's rough. Hopefully you had full coverage, im working on finding a sponsor for the exhaust but I'd like to run ether the akro, wings or leo!
Whats the best street gearing, you know for twisties, wheelies, 55mph roads. (I have KTM EXC-F 500)
I would say 15/45ish
@@TheonlyrealChester thanks
When you got it up in 3rd that night it lookt like you may have been riding up more of an incline whereas that street you were just on looks pretty level (video can be deceiving though) which may explain the easier 3rd gear PW. All right I'll hook u up with a sub cuz of the dongle knowledge you passed on. Keep it up
It was fairly flat there, I think it was just the full tank of gas weighten me down, well see as I empty this tank haha. Thank you💪🏽 appreciate it
I dont mean to be so off topic but does someone know of a way to log back into an instagram account?
I somehow lost the login password. I would love any tricks you can give me!
@Victor Drake Instablaster ;)
@Jad Dariel i really appreciate your reply. I found the site through google and Im in the hacking process now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Jad Dariel it did the trick and I actually got access to my account again. I am so happy!
Thank you so much, you saved my ass!
I have the 19, bought it used. Modded airbox, dongle installed and pc5 but i notice my air sensor to the exhaust is still on the bike. Is'nt it suposed to be removed ? Does it matter ?
It doesn't have to be there but isn't hurting anything
Does mapping2 need selecting every time the bike is switched on?
Yes!
Hi. Are you still using the bike with the fuel dongle? Could you please measure the resistance of both resistors it includes? Can not get it from any factory delivering to my country (. So can make it myself easily then. They say the required values are 1M Om and 300 Om. But I am not sure if it just to replace the o2 sensor to trick the ecu or it will change AFR at the bottom as well. Thanks
is it still possible to do easy clutch up wheelies on the 2020 model?
Yeah definitely! But clutches are expensive 😂 I like bouncing it up with throttle, it comes up easy without the clutch.
6:24 best part of the vid. Just kidding. Great vid, thanks for sharing! Hop it will work on my 21 SMCR as well.
Does your SM have the traction control like the Enduro model? Do you have it shut off?
I'm not sure on that one!
It does. And you have to shut it off i you want to wheelie.
My 140cc pit bike is the same as that
i think the problem with the sm is the gearing, its too long. lets say i would get it to do no more than 170 175kmh, thats what a supermoto should go around to. and you would have a lot more power
Totally agree, I changed mine 14t front 45t rear, clutch up 4th no problem, power wheelie 3rd no problem
Does your 701 ever stall when downshifting? My Vitpilen 701 (same engine) stalled when going from 3rd to 2nd while rev matching and I can't figure out why.
Interesting, I've never had that happen!
@@TheonlyrealChester You're lucky. Seems to be a common issue in the Vitpilen forums.
Have it on my 2020 smcr 690… you have a sport exhaust?
@@paul95923 Ya I have an Arrow exhaust and fuel dongle. After the break-in period and first service I haven't had another stall.
@@astifcaulkinyeras I just ordered the Rottweiler Performance Fuel Dongle. Which do you have? I hope that solves my problems
Is there two or one O2 sensor on the husky?
1!
1) where can I buy it ?
2) will it work on the 45 hp version?
rottweiler performance and I think so?
hai la versione depo? sei riuscito a sbloccarla un po?
are you going to try shorter gearing?
Yup! Going on this week
I hear the enduro wheelies up easier because of the sprockets it have
Yup! The sumo is geared to do 130+ mph
I lost power with the fuel dongle installed... do you know why?
Interesting 🤔🤔🤔 you may have unplugged the wrong wire? Or are you running aftermarket intake or exhaust?
@@TheonlyrealChester yes I am running yoshi pipe no baffle
@@wildnas5272 that could be it, I would get a tune!
Does this dongle affects the consumption?
Slightly
Do you need a fueling dongle when you already have a power commander 5
Nope!
Chester Anderson thanks! Getting mixed awnsers on this, some say the PCV doesnt work on lower rpms so a fuel dongle is still necessary and some say its not D:
@@Brentvl rottweiler themselves say a dongle is needed. Closed loop (below 5500rpm) always corrects itself with pcv only. It only works in the higher rpm ranges. There’s a video on their website about it!
Does the 701 have the USB port up front like the New 690 does ?
It does not!
@@TheonlyrealChester Dang
@@thomastometich6767 right, but it has the better seat haha
@@TheonlyrealChester that is true 👍
Could you put it on a dirtbike
I think they make it for some motos!
Fender eliminater fits the 2021 u think ? Thanks for the vid
Definitely!
Thanks mate always helpful
Just ordered the dongle for the 2021 hopefully it has same effect on bike .:) party on
Sorry to keep bugging you about the 701.. but do you know if the dongle voids ur warranty?
@@torzecjohns6429 I don’t believe so!
Where can you buy this?
Rottweiler performance!
where did u buy this? And is it still on ur Husky?
I got it from Rottweiler performance and I'm not sure
@@TheonlyrealChester thanks for the quick reply! Have a nice evening (it‘s 7pm over here - dunno if it is for you too lol)
does it work on carb 2 strokes ?
Only if it has a 02
An electronic plug can never do anything for a mechanical carb. The jetting is what is needed to change if you want more/less fuel
What kind of exhaust you lookin at
Probably the wings!
GPR Evo is the real sh*t. Sounds good, easy to install, legal(for switzerland), loud, looks good with its titan silencer...
5 out of 5
Try 15 tooth for the front and 47 for the rear sprocket. That's scary! 🙂
I bet😂 15t is going on soon
@@TheonlyrealChester Yeah. with that set up the 3rd gear wheelie comes easy. Could do on 4th as well. Stay safe 😉
My 701 2020 stock 15/45, in mode 2, 3rd gear wheelie no problem👌
Good!
Thanks!
How’s the gas mileage?
Pretty decent!
how you liking the 701?
It was fun for the 2 months I had it lol
Chester Anderson you got rid of it?
@@speezy1414 check my instagram, car hit me and totaled it
When you wheelie dont lean forward after you give gas you have to lean back.
I knowwww😂🙄 Im just getting comfortable on it
Clutching it up is the *only* proper way to wheelie. When you try & do them with the power of the engine alone, *it* controls when the wheelie happens. When you use the clutch, *you* control when the wheelie happens. :)
Aye 100th like
👑
You should get a new exhaust
It's on the way:)
Bro,use the clutch to pop it up 😂
No reference anywhere to where to get this fuel dongle-lol
The biggest thing u need is actually to get that akropovic
Facts😂
@@TheonlyrealChester That slip on is a beut😉👀and the sound😻😏
@@sevensterwalt definitely 🙌🏼 but it's also $1000😂
@@TheonlyrealChester true😔, but all im sayin is that is 100% worth it, u wont regret a single thing👀❤️btw, keep up the hard work on YT and Tik Tok😉
@@sevensterwalt definitely 🙌🏼 thank you!💪🏽💪🏽
Yo that girl was a babe! Did she like compliment the bike or something to initiate the convo?
Haha I just pulled up next to her and went over to talk
Chester Anderson haha good stuff! Maybe she’s real chill. Good luck
You need a Mx bike
Definitely haha
A safety issue for people that don't know how to ride? I think you're overdosing on placebo 😅
I guess by the no answer, that means no..😢.
Wait what was the question haha
All these stupid environmental regulations make it like that... Wish i would live in the US...
Chester's got a girlfriend 🤭
👀👀😂