Lucky 13 3D Printed Jointable Figure Assembly & Animation
HTML-код
- Опубликовано: 13 авг 2023
- Mr Campbell Prints Children Toy Fund:
www.justgiving.com/crowdfundi...
I printed this absolutely amazing figure by soozafone from printables link below.
www.printables.com/model/1483...
This took only a few hours to print, except I lost a piece, so I had to print the next day (so technically it took a day to make )
In this video, I will hazadly guide you through the exhilarating process of assembling the Lucky 13 3D printed jointable figure, complete with intricate design and dynamic articulation.
This isn't a step-by-step tutorial. More of my video documentary of how i built it, lol.
Once the figure is perfectly assembled, get ready to watch me bring it to life! As i attempt to delve into the realm of animation, showcasing some of the endless possibilities for posing and animating Lucky 13 figure.
Get ready to witness the magic of Mr Campbell Prints, where art, technology, and creativity converge in a mesmerizing display of innovation. Let's dive in!
#3dprinted #printables #soozafone #anime #build #3dprinting #new #assembly #articulated #figure #lucky13 
Кино
Man, if only you put this together in frame..
I know next Time, or check out my dummy 13 video it's better I hope
Sorry, I don't mean to be salty. I got a my guy together, I found the PDF, that and your video made it happen. Thanks! @@MrCampbellPrints
@Jeffk750 it's not salty it's true camera work could be better. I appreciate the feedback
I printed mine out at 200% and it came out well
I'm glad maybe do 300%
The craziest part is, instead of using the PETG material, I used PLA and resin instead 💀
How did it turn out
5:46 is when the construction starts
😂 your right
Ur a fuckin legend thank u I have the exact same print
Thank you
Do you remember your settings for rafting this... im printing mine now with a raft and it's looking like it will take a bit to break these loose ha ha ha
Not 100% sure, but probably 5 layer
give this man a job as a digital designer
Thanks, that's the dream
What settings did you use to print this? Ive tried printing it 3 times with PETG now and none of the joints fit together
The tolerance can be tight, but I printed at 150% scale and make sure printing joints in the correct orientation, I.e. the pressure isn't on the layer line
A mi me sale como una base de más sin balsa y también lo hice con balsa ya logré que encajen pero tiene en la parte plana como más ancho y eso permite que no gire 360
Acabo de usar el perfil de balsa estándar en cura cuando imprimí esto.
The only problem is you didn’t get some in frame but this video helped a lot. much better than the digital instructions vid. (:
I know I didn't realise till after. Thanks for the support
@Mr Campbell Prints mind sharing the file that has the raft on it? What settings did you use? What printer did you use? What filament? Petg or pla? I seen you said pla plus but not sure if that was all. Appreciate it!
I'm using cura for the slicer , ender e s1 pro with sonic pad for printing, sunlu and esun pla + for filament, I printed skin/shell parts using a 0.15mm height using a raft and a print speed of 140mm/s I did print skeletal structure at a 0.15mm height at 100mm/s i have built this modle in various colours usine petg for the bine structure, i find petg is good for possing figure as it strengt work weel with prolonged stress but i find petg can sometime lack the flexibility needed for it to work as a toy tomplay with (my kids have broken a few) .files can be found on soozafones printable page. When you download it, there are various folders named individuals parts and plates parts. I use plated. Hope that answers your questions.
Nice, I am using an ender 3 v2 with PLA. Wish me luck!@@MrCampbellPrints
@@TheCartoons4you good luck
First one was meh, but the second one with raft was puurfect :)@@MrCampbellPrints
im getting mine in the mail🥳🥳
I hope you like it
@@MrCampbellPrints same😊
Zou ik je mogen vragen hoe staan jou settings aub ik krijg het nooit zo mooi in elkaar en heb veel stukken die breken mvg
I'm using cura for the slicer , ender e s1 pro with sonic pad for printing, sunlu and esun pla + for filament, I printed skin/shell parts using a 0.15mm height using a raft and a print speed of 140mm/s I did print skeletal structure at a 0.15mm height at 100mm/s hope this helps
@@MrCampbellPrints thanks👌👍👍👍
hey man please uplode how to make easy 13 newer vertion please make it
Isaw that im planning to make a video on that, thanks for watching
Le pusiste doble cadera😅
If i buy it do i need a 3d printer?
I used a 3d printer to make it, you can't buy it unfortunately
Great channel
thank you
Review plssss
Review what?
@@MrCampbellPrints the lucky 13
It's not a bad idea I may do that
@@MrCampbellPrints ok
Me vemde esse brinquedo
I wish I could
Just sqying this did not help
I try my best