I don’t even have a freshly printed dummy 13 let alone a 3D printer, but this is satisfying to watch, if I do get one then I will come back to this vid without a thought
I started to give up when the head was attached, but after watching your video I didn't have any more trouble, I followed you using the gloves. And my fingers didn't hurt and this video really helped!
Amazing tut ! ( also I think the best and most satisfying part is the torso 😌) I always have fun putting it together and this tut was clear I’d recommend this very much :D Also idk if you tried but the asmr on this was AWSOME so yeah it was helpful and relaxing:O
Thank you! I'm a 77 year old Granny with arthritis and I was trying to make this for my 4 year old grandson's Christmas stocking. I have just finished it, and the last bit, the shoulder tab, the lugs broke off, but I can stick it on and it won't affect any movement. My fingers are sooo sore, lol, but I was determined, I used pliers to press the bits together as I have no finger strength. I could not have done it without your video, so thank you again!!!!
this is the best tutorial I've ever seen, i watch a lot of video to how to assemble the pieces but i didn't understand it but this video helped me a lot
If you write that it doesn't work for you, it is worth checking whether the frame parts are not made of PLA, they must be printed from ABS, ASA or PETG
THANK YOU SO MUCH BROO, THE PACK I BOUGHT HAD A INSTRUCTION PAPER THAT MADE ALMOST NO SENSE AND IT MADE MY FINGERS HURT SO MUCH. But thanks to you i finally made my dummy/titan 🔥🗣
thank you brother for this video it is helpful to people who dont knowto how to assembol this dummy 13 like me other wise i dont know how to assembol it and thank you so much and the video is to satisfiying
I tried assembling mine on my own and dont even have ut by me right now, but like snother person said, this is so satisfying to watch and i can already tell itll be super helpful
So my sister good one of thses dummies and a spiderman for from the creator of this video witch lives in my neighborhood and I'm building this in my room it is harder than it looks but the end result is really cool love your videos keep it up
what settings are you using, I printed 4 sets on runners and most parts don't even go together without some serious force. the hip, joint wouldn't even slide on like yours everything takes so much pressure to get parts to connect. I will try and redo my flow calibration but I run auto calibration flow every print, but not sure how people are putting these together, my thumbs are sore and bruised now.
It should be the same, I haven't tried to assemble the specific model you talking about, but so far as I can see the only difference is the armor style
I have printed this across multiple slicer, printers, filaments, even in 8K resin, etc and all the parts are really bad fitting and need so much work to get to fit. Why not just make the hips and chest single pieces?
I’m not the designer of this model, so can’t say why it comes in separate pieces. It’s hard to say why you had problems with the model, the one you see in the video is printed on X1 carbon, I used Bambu PETG for the frame and Bambu PLA for the armor, had no post processing after printing the model, and as you can see from the video there was no problem to fit the parts together
Hey, my t13 is split into two wholes. The body and the waist and the other whole is the legs. I can't connect it to the other part because I hot glued the waist and it connected and made kind of a mold out of the inner piece but now I can't connect it. Can anyone help
Dude i wouldve never made this perfectly with out you you make it nice and easy to follow i hope you get alot of good luck for helping us
I don’t even have a freshly printed dummy 13 let alone a 3D printer, but this is satisfying to watch, if I do get one then I will come back to this vid without a thought
Thank you, appreciate that!
Do not 3d print it, the file sucks.
@@Liampatrick-e3t what exactly?
@@Liampatrick-e3t don’t even have a 3d printer
Thanks for your help and WE ARE NEVER TO OLD TO PLAY WITH ACTION FIGURES
You are welcome!
Yeah 😁
Bro thanks for helping us we love you and i love action figure stickman❤❤
@@AvrylleS thank you for your feedback!
For sure
I started to give up when the head was attached, but after watching your video I didn't have any more trouble, I followed you using the gloves. And my fingers didn't hurt and this video really helped!
Thank you! Happy to hear that it helped 😃
SHUT UP
Amazing tut ! ( also I think the best and most satisfying part is the torso 😌) I always have fun putting it together and this tut was clear I’d recommend this very much :D
Also idk if you tried but the asmr on this was AWSOME so yeah it was helpful and relaxing:O
Thank you for your feedback and kind words! About the asmr, it’s just a coincidence😁
@@Pro3DTinkeringur gloves was reminding me of slime
Thank you! I'm a 77 year old Granny with arthritis and I was trying to make this for my 4 year old grandson's Christmas stocking. I have just finished it, and the last bit, the shoulder tab, the lugs broke off, but I can stick it on and it won't affect any movement. My fingers are sooo sore, lol, but I was determined, I used pliers to press the bits together as I have no finger strength. I could not have done it without your video, so thank you again!!!!
Thank you for your feedback! I’m so happy to hear that it was helpful
Hey you know you can buy this
It helped me to
Woooooooooooooooooooooo
@@Pro3DTinkering 🌷
Its working, thank you so much for this video ❤
Thank you!
Great!!!!
I'm a visual learner and this helped a lot. No problem with assembly! Thanks my son loves it
Thank you for your feedback! I am really happy that it was helpful
Thank for the help i am brazilian but you content is very very amazing
Thank you!
@Daviluiz_editsWe got brazilian phonks along with u
Omg I ordered one and heard it was hard to assemble! Ty for the tutorial I’ll give updates when it’s done!
Keep me posted, thank you!
@ ofc!
@@Pro3DTinkering I got it pre assembled but it’s very nice and high quality! I’ve managed to make two stop motion vids with the t13 and a stikbot too!
@@Knexstuff-thrillcrafts That's awesome! From where did you order it?
@ amazon
It made my fingers hurt and yet i still cant assemble them this is probably one of the hardest and annoying figures yet
Yes! I had to glue a lot of parts together, after breaking them during assembly
Euqueru
But its so Easy?
@@ParasiteFlamesYTdude the head part it won’t fit in
This is my first time doing this so this helped alot
thanks for helping with the dummy 13 helps a lot
You are welcome, happy to hear that it helped
Its so hard at the waist😭😭😭😭
And head
Nah it's easy@@TheRredTomato196
Yeah😭
True
Not yet :/
Thanks bro I now have a t13 and ima rewatch it to build the other one thank you
I like and subscribed
Thank you!
Now i know how to construct a dummy 13 tysm
Thank you for watching!
this is the best tutorial I've ever seen, i watch a lot of video to how to assemble the pieces but i didn't understand it but this video helped me a lot
Thank you for your feedback!
Самая толковая инструкция, что есть на RUclips! Большое спасибо!
Thank you for your feedback and kind words
This is so amazing what the freaking problem is I give somebody in my class and he stole the piece and he broke it
If you write that it doesn't work for you, it is worth checking whether the frame parts are not made of PLA, they must be printed from ABS, ASA or PETG
Turned out well after 3 hours of assembly!
Its so working bro thank
Thank you!
Sarcasm 💀
TYSM now I know how to make them for tommarow christmas
Wow so amazing
Thank you!😊
thanks so much the funny thing is that right after i showed it to my dad he accidentally broke it😂😂😂
😁
It’s really helpful
Happy to hear that! 🙂 Thank you for watching!
I take it back, and the head keeps on falling off
this was super helpful. thank you. this guy disserves more love
Thank you!
Nice job! It'clear and interesting.
Thank you!
Wow good job!
You are better than others!
Thank you 😊
i love the hand asmr
thanks for helping! thank you for tutorial😊
Thank you for watching!
Thanks for the video, Amazing print! Can you let us know what you used for frame and armor. PETG/PLA? Also what brand, nice colours!!!!
Thank you for your feedback, I used Bambu PETG for both frame armour
THANK YOU SO MUCH BROO, THE PACK I BOUGHT HAD A INSTRUCTION PAPER THAT MADE ALMOST NO SENSE AND IT MADE MY FINGERS HURT SO MUCH. But thanks to you i finally made my dummy/titan 🔥🗣
Thank you for your feedback and kind words!
thank you, finally I can assemble it❤🎉
I love ur vids I even watched your dummy 13 k9 video
Thank you for watching!
Love the design of this figures
Yeah, me either
Thanks very much, the instructions the came with it were confusing. You’re a lifesaver, I’ve subscribed.
Thank you for your feedback and kind words!
Great job!!!
Thank you!
🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🇸🇮🇷🇺🇷🇺 3:47
No puedo esperar a navidad ya siento las mariposas o la emocion de tener uno en mis manos😊
I love dummy13
This is the best tutorial I’ve ever seen
Thank you!☺️
Asmr video because of the gloves💀
Lol
2:25 this part is super hard for me, when I try to put it in it doesn’t go all the way through
Do you mean the connection with the armour?
@@Pro3DTinkering yeah, but I finally figured it out, thanks :D
Great! Np)
I'm having this issue it won't connect@@Pro3DTinkering
Thats right
Hi, im having a little bit of trouble, i 3d printed the parts, but they just wont fit (i grabbed the original file, sliced it and printed it)
Hi, that’s strange, considering that you used the original file without adjustments. Which filament did you use?
thank you brother for this video it is helpful to people who dont knowto how to assembol this dummy 13 like me other wise i dont know how to assembol it and thank you so much and the video is to satisfiying
Thank you for your feedback and kind words!
@@Pro3DTinkeringmaster I'm to much an idiot to do it my self
А где вы их покупаете?
You can find them on Etsy
dik
Или озон
@@Амогус_фильмя на озоне заказал там доставка долгая
Thank you. I managed to assembled my children figurine. Good tutorial
Thank you!
ITS NOT WORKING
Could you please specify what exactly?
@@Pro3DTinkering Me the hook thing
Esse cara é um GENIO
this dumb peoples can't build that an guide is her
Ur supposed to snap it on@@kingjcsansgamer904
For me the stomach isn’t attaching to the chest
Could you please provide more details, is the joint long enough to connect with the chest part?
@ yeah it came with instructions everything is how it should just whenever I move the chest it pops out
@ I’m asking about the joint, because there are almost two identical parts, one is a little longer than the other one
@ yeah it’s the right one
@@Wolfy_vr1 got it
I tried assembling mine on my own and dont even have ut by me right now, but like snother person said, this is so satisfying to watch and i can already tell itll be super helpful
Qué buen video sirve por si las instrucciones no vienen y está muy fácil de armar con el tutorial
Thank you for your feedback
Thanks for the tutorial. Ive already created some battle stopmotion videos with these figures
I’m about to get mine on Wednesday and boy am I excited!
That is great!
From where did you order it?
@@Pro3DTinkering I ordered it from Amazon, why?
@@calvinietivieyepie9494 just wondering🙂
What color
😂😂😂😂Hammer danke. Ich hatte es nie zusammen bekommen. 3x Herzinfarkt gehabt 😂😂😂😂😂🎉
So my sister good one of thses dummies and a spiderman for from the creator of this video witch lives in my neighborhood and I'm building this in my room it is harder than it looks but the end result is really cool love your videos keep it up
Thank you!
Omg is Hard I cannot do it with the body😭😭😭
Which part?
I am also having hard with this
Could you please send the time code
@@Pro3DTinkering 1:41
@@SUPERNOOB_343 it doesn’t snap in?
This video is sooo satisfying and thanks for this video
Thank you for watching!
I bought 10 of them and it was
So hard my hand was hurting and red next Time i will only buy 2 of them
Did you assemble all 10?
Yeah my hand was hurting when i build those😢😢 but i'm still happy about it
@@Pro3DTinkeringyeah
@@zohitman45 wow!
Thanks man you really helped me👍😁
Happy to hear that, thanks for watching!
what settings are you using, I printed 4 sets on runners and most parts don't even go together without some serious force. the hip, joint wouldn't even slide on like yours everything takes so much pressure to get parts to connect. I will try and redo my flow calibration but I run auto calibration flow every print, but not sure how people are putting these together, my thumbs are sore and bruised now.
I’ve printed this model using the designer’s settings, did you print the betta version or 1.0?
@@Pro3DTinkering did the 1.0 i will double check my slicer settings in Bambu just incase but after printing 4 sets not go together like in your video.
@ that's strange, which filament did you use for the frame?
Pla as I ran out of petg on another project for a client. Might be the issues using pla
@@Doominice Just use the PETG and you'll see the difference
Me ayudo y esta muy bien explicado 👍 ❤
Thank you!
9:31 It's very difficult bro, you have to use internal strength😢
It might be difficult something to snap those parts depending on the filament used
Thanks for the tutorial❤🎉
What material did you use?, i used pla and it was such a pain. Any tips?
I used PETG for frame parts and PLA for armor
PLA not gonna work for the frame
@@Pro3DTinkering thanks, really appreciate it👍
@@scienceman792 You are welcome!
Everything is laughter and fun until you have to put them together with your bare hands
🙂
So true
i got a piece stuck how do i get it out😭😭😭
Which part?
Did you have to sand a little/lube? These tolerances are super tight.
Nope, just assembled straight from the printer
Thanks! It was very useful!
okay I did it yey thank you very much 😊😂
Great!
I got scammed mine won’t let the head go on
I ordered myself one such figure (female) tell me please the assembly process is different from what is shown in the video or not ???
It should be the same, I haven't tried to assemble the specific model you talking about, but so far as I can see the only difference is the armor style
Yes, the differences are only in the breastplate, it just seemed to me that because of its structure, there will be differences in the assembly
@@1xOut-k5d when you gonna get it?
In about 1-2 weeks
@@1xOut-k5d keep me posted, I will be happy to help
I follow all the steps but... Is it normal that some pieces are loose and some joints are loose???
It’s all about the filament used for printing
How did you do it at 5:51!
Just make sure that you aligned the armour part with the flat side of the frame piece, please keep me posted
One day..
I’ll have all the action figures in existence
I love your vids
Thank you so much! 😊
I really wanna try one but when I print it it is almost impossible to put together any tips? My fingers hurt
Which filament did you use?
@PLA but im gonna try petg
@@Mrtoasty-e8g keep me posted
Fue de gran ayuda el video , al final lo logramos 🎉
Muchas gracias 🎉
You are welcome!
Dude, you helped me a lot, thanks
Happy to hear that it helped, thank you for watching!
Thanks for the guidance I was able to do it and they look very good 😊❤
Thank you for watching!
Bro where did u get that from?
@@MithunvsanT 3D printed
@@Pro3DTinkeringwhat website?
@@Pro3DTinkeringand is there different colours?
can i know the settings that you used to 3d print it mine keeps breaking :(
I used disegners profile, which filament did you use?
@ Petg
Thanks! I understood the video more than the instructions 😅
😁thank you for watching
Me too😅😅
@@DinahLee-nv8vg 😁
I have one of those and those they sometimes fall but when I get the right attitude, I can do it
I can't snap the lower piece on 1:42
It doesn't come in? Or the ball joint is too low?
Idk the ball joint is perfect idk
Just make sure you took the right frame part for lower piece 1:15
Yeah I did that but I have this the thingy to and got it all done but it just the lower piece popping out
I have printed this across multiple slicer, printers, filaments, even in 8K resin, etc and all the parts are really bad fitting and need so much work to get to fit. Why not just make the hips and chest single pieces?
I’m not the designer of this model, so can’t say why it comes in separate pieces. It’s hard to say why you had problems with the model, the one you see in the video is printed on X1 carbon, I used Bambu PETG for the frame and Bambu PLA for the armor, had no post processing after printing the model, and as you can see from the video there was no problem to fit the parts together
Well, i managed to assemble the torso, the head, and some things. But i can't get the leg one. I can't get it on my arm, what to i do?
I love this video it was so satisfying with the clicks
Thank you!😊
@@Pro3DTinkering You're welcome
REALLY THANK YOU!!!
Thank a lot I tried to use the manual, but it didn’t work so I tried to watch a other video and that didn’t work, but when I tried this one it worked😁
Thank you! I really appreciate your feedback! 😃
@@Pro3DTinkering your welcome😁
@@Pro3DTinkering btw i subed😊
@@Cutecats-kz9bn 😊
that is cool you are so good at this
Thank you!😊
Hey, my t13 is split into two wholes. The body and the waist and the other whole is the legs. I can't connect it to the other part because I hot glued the waist and it connected and made kind of a mold out of the inner piece but now I can't connect it. Can anyone help
I just bought this thing from a shopping app, and the Manual isn't included. Thnx for this video
I did the same but I had like bluegreen combination figure and build it in a runner gate
Bro this is soo satisfaying i go to sleep😴😴😴
😂
My problem is i cant connect the head
Did you print of buy the model?
Wow ur good at building the t13 unlike me It took me 1hour to figure out how to build it
Thank you) There are many hours of preparation behind the scene😁
And there are also the arm and the legs pieces that don't go all the way, help me
Just follow step by step
None of the pieces fit
Btw just asking but is that 20 cm
Yes, it’s 150% of the original size
Exelente lo logré gracias a este vídeo. ❤❤❤❤
Thank you for watching!
It works. I almost can’t put the feet, but I did it.
Thank you, happy to hear that!
Can i do both body and armor with ASA?
I haven’t tried with ASA, can’t say exactly, sorry) but you can find all the information in description