Part 1 of 2 | Replacing Sump Gasket - Briggs & Stratton V-Twin 20HP

Поделиться
HTML-код
  • Опубликовано: 22 май 2022
  • Now, in two parts.
    Replacing a Sump Gasket - Briggs & Stratton INTEK V-Twin 20HP
    Part 1 of 2
    I split the original Video into two parts, to make it easier to watch.
    This old John Deer L120 lawn tractor was putting out a cloud of smoke. The sump gasket was leaking and oil was dripping on the hot muffler.
    I've never worked on one of these before, but I pulled the engine and replaced the sump gasket, and crankshaft main seal. So far so good!
    Thank you for watching.
    Please like and subscribe!
    Man About Home
    www.buymeacoffee.com/heymanabour If you feel like helping the channel, now you can drop a gratuity at Buy Me A Coffee!
    Please help support the channel, by using my Amazon links.
    As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
    Briggs & Stratton 594195 Briggs and Stratton Crankcase Gasket, Grey
    www.amazon.com/gp/product/B01...
    Briggs & Stratton 795387 Oil Seal Replaces 791892/690947/499145
    www.amazon.com/gp/product/B00...
    Music:
    Twenty Nineteen Americana Instrumental by Wayne John Bradley | / ayneohnradley
    Music promoted by www.free-stock-music.com
    Creative Commons Attribution 3.0 Unported License
    creativecommons.org/licenses/...
    "music by audionautix.com"
    a href="audionautix.com/"Creative Commons Music by Jason Shaw on Audionautix.com
    AcousticMeditation2
    HappyStrummin
    TravelLight
    BackToTheWood
    Mixkit Stock Music Free License
    mixkit-acoustical-769
    pixabay.com/music/ - "Pixabay License"
    AcousticGuitar1
    guitar-blues-lick-2358
    in-overdrive-bluegrass-1149
    Music: www.bensound.com
    bensound-onceagain
    Campfire Song - Chris Haugen
    Temptation - Chris Haugen
    Backwoods BBQ - Chris Haugen
    Casey Don’t You Fret - Dan Lebowitz
    John Deer | L120 | L130 | oil leak | Gasket Replacement | Oil Pump
  • ХоббиХобби

Комментарии • 8

  • @brandonkelsheimer1408
    @brandonkelsheimer1408 Год назад +1

    I’m in the middle of doing this same project and your video helped quite a bit. Great work!

    • @manabouthome
      @manabouthome  Год назад

      Good to hear it! Thank you for watching!

  • @MrXcrt
    @MrXcrt 6 месяцев назад

    Another great video and in depth explanation of what’s involved, thanks

    • @manabouthome
      @manabouthome  6 месяцев назад

      You're welcome. Thank you for watching!

  • @rickyroten2410
    @rickyroten2410 10 месяцев назад

    I don’t think you have to take all the stuff off the top , do you

    • @manabouthome
      @manabouthome  10 месяцев назад

      You may not need to. But, if you want access to the flywheel, you'll need to remove the cover. Thanks for watching.