OMG. THANK YOU SOOO MUCH. You saved me from being in the doghouse big time. I told my wife I could fix this problem (no start). I’ve had this dryer apart a hundred times to clean out the lint. I checked the ohms across the starter motor and didn’t get a reading so I thought my motor was bad. Ordered one and waited a couple days. Put the new motor in and.. {click}. I thought it was the motor until I saw your video. Sure enough it was the problem. 10 minutes later (to let my soldering gun warm up) and the dryer starts! Thanks again!!
Thanks for showing this. I could not figure out what the problem was after replacing the pulley checking both the pulley switxh and the thermal fuse. The board had blown. A little solder and all good again. 😊
Hello and what do you mean just solder? Did you replace and solder something? Confused please help. I checked all except board and all looks good yet dryer won’t start
I have LG dryer with TE1 error, I called a repair person and replaced thermistor with no luck still have the error any idea if it’s a bad control board.
Steps to Reset Press Power to turn the dryer off. Unplug the dryer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the Start/Pause button for 5 seconds. Then plug the dryer back in or turn the circuit breaker back on.
OMG. THANK YOU SOOO MUCH. You saved me from being in the doghouse big time. I told my wife I could fix this problem (no start). I’ve had this dryer apart a hundred times to clean out the lint. I checked the ohms across the starter motor and didn’t get a reading so I thought my motor was bad. Ordered one and waited a couple days. Put the new motor in and.. {click}. I thought it was the motor until I saw your video. Sure enough it was the problem. 10 minutes later (to let my soldering gun warm up) and the dryer starts! Thanks again!!
Thanks for sharing. Is my pleasure to hear reports like this
Great Video ...Just Repaired my Dryer By Doing exactly what you Mentioned
@@davidvasquez5386 awesome!!!
Thank you bro, you're a life saver 🙏🏿
Thanks for showing this. I could not figure out what the problem was after replacing the pulley checking both the pulley switxh and the thermal fuse. The board had blown. A little solder and all good again. 😊
That's awesome thanks for replying
My guy.... many many thanks for this information.... you have saved me alot more time and money than you know.🙏🙌
Awesome
Ty this was my issue and it worked w a soldering gun and some soft core solder beed reconnected the blown circuit 👍🏼
That's awesome. Thanks for sharing
Hello and what do you mean just solder? Did you replace and solder something? Confused please help. I checked all except board and all looks good yet dryer won’t start
@@apostolicway2604 ruclips.net/user/shorts9M2p0nZA7kI?si=3Szl1-jI2F_8VwDw
Thank 😢.
You
You’re so. Kind
There had to be a reason the board had a blowout.
True. Sometimes it could be some kind of power surge, but I'm not Electrician so I don't know for sure
Worked for us thanks.
Awesome
Tried to do the same with mine, looks like they are pouring apoxy or something over the entire board so I'm not able to get to it.
I have LG dryer with TE1 error, I called a repair person and replaced thermistor with no luck still have the error any idea if it’s a bad control board.
Steps to Reset
Press Power to turn the dryer off.
Unplug the dryer from the power outlet or turn the circuit breaker to the unit off.
With the power disabled, press and hold the Start/Pause button for 5 seconds.
Then plug the dryer back in or turn the circuit breaker back on.
Can u show me how to do the rest bc my dryer has a blow out
This is one part of a three-part video where I show you how to fix it
Hello, my dryer has the same problem, what can I do to fix the problem, please help me.
Watch the videos. There are three parts. You need to get the computer board out and look at it
Please show us
How you fix it,
We know the problem
Sorry, I don't check replies. This is a three-point video that shows how to fix it.
Still waiting on those other 2 parts .... 😕
@@Rackus82 the other two parts are there
Or if it worked
Part 2 ruclips.net/user/shorts0Fh79FfK6oo?feature=share
Part 3 ruclips.net/video/Lr3tk_2M8nI/видео.html
There had to be a reason the board had a blowout.
Yes, it could happen with a power surge, or possibly incorrect grounding. Might be just a one time thing.