How to Make 12V Lithium Battery to replace the Old 12V UPS Battery || 12V LiFePo4 || 12V Li-Ion

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 120

  • @silent4543
    @silent4543 2 года назад +12

    I would like to see some longevity tests on something like this. Some cheaper ups units will actively use the SLA battery to smooth out the output voltage, this might cause excessive wear on Lithium based batteries.

    • @goldillux
      @goldillux 5 месяцев назад

      but would this be able to handle ac load for a bit? or would it kill the batteries faster?

  • @breakflight
    @breakflight 2 года назад +3

    I like a lot of this. But some of those cold solder joints are scary. Also, traditionally XT60s use the female connector for the battery, which is more protected.

    • @jasonkeen7108
      @jasonkeen7108 2 года назад

      Can always print a cover for the socket after all used the 3d printer to print the battery case

  • @rhammond4656
    @rhammond4656 2 года назад

    hi, i have started to make this with 32650 batteries. but i guess the outpot connector is the socket and the charging is to the terminals. is this right please.

  • @alpha_pixel_
    @alpha_pixel_ 2 года назад +2

    Does it really replace the Lead acid? Bcoz cut off voltage of lead acid circuits is different. Than full charge of li ion and lifepo4.

    • @opengreenenergy
      @opengreenenergy  2 года назад +1

      I have mentioned in the video description. But the Lifepo4 Battery cutoff voltage is very close to the lead acid battery.

    • @alpha_pixel_
      @alpha_pixel_ 2 года назад +2

      @@opengreenenergy 12.7 for lead acid, 14.6 for lifepo4 🤔

    • @opengreenenergy
      @opengreenenergy  2 года назад

      Please go through this article regarding the charging voltage for the lead acid battery.
      www.powerstream.com/SLA.htm

  • @boasnovasonline8764
    @boasnovasonline8764 2 года назад

    hello my dear, take me out of a big doubt, nobreak battery is used to replace the electric bike ones???can i put 4 nobreak battery in the electric bike what happens?? to run a 6 coil alternator with a 350w 36 controller at 48 using 4 UPS battery? My battery is 7 Ah

  • @onurody
    @onurody Год назад +1

    The question I have in my mind is that you used 3s in one battery and 4s in the other, is there a purpose for this?
    Finally, my ups battery charging voltage is 16.20v 4s or 3s should I make a battery

    • @opengreenenergy
      @opengreenenergy  Год назад

      There are two different battery chemistry one is lithium ion and other one is lithium iron phosphate. The cell voltage of the first one is 3.7V and the second one is 3.2V. For the second one we need 4S ( 3.2 x 4 ) to get around 12V.

  • @burkesdale
    @burkesdale 2 года назад +2

    Hello, Have you a wiring diagram please for the Li-Ion Battery - 11.1V / 18.2 Ah, 1250g?

    • @opengreenenergy
      @opengreenenergy  2 года назад

      You can watch this video where i have explained the details.
      ruclips.net/video/dq2JUwJisY0/видео.html

  • @papsnil
    @papsnil 2 года назад

    do have shop
    can i buy your case for 18650

  • @divikumar5475
    @divikumar5475 2 года назад +2

    Thats really a cool build, where can I get the battery box I am looking for it everywhere but I cannot find it

    • @opengreenenergy
      @opengreenenergy  2 года назад

      Thank You. You can 3D print the box. The link for the design file is given in the description

  • @xSO20
    @xSO20 2 года назад

    how do you charge it? do you bms or do you need a charging module?

    • @adoado6106
      @adoado6106 2 года назад

      U need charging module probably IMO this video lacks important information.

  • @gideonlapidus8996
    @gideonlapidus8996 2 года назад

    What type of charger? Same as lead acid or constant current constant voltage?

  • @SirHackaL0t.
    @SirHackaL0t. 2 года назад +1

    Is that the right connector for the pack? Surely it should be the socket, not the plug that goes on the live connections. Far too easy to short those connectors accidentally.

  • @amocarnell2721
    @amocarnell2721 2 года назад +1

    Kannst du den Link zu Thingieverse einfügen?
    Das wäre super!

  • @PowerofStudiesofficial
    @PowerofStudiesofficial 2 года назад

    Lithium fosfer battery ka canection Kay alag hota ha??

  • @kadyo_diy
    @kadyo_diy 2 года назад +1

    Can you make a now a lipo4 powerbank?32650 maybe?

    • @opengreenenergy
      @opengreenenergy  2 года назад

      Noted, i will make in the future

    • @kadyo_diy
      @kadyo_diy 2 года назад

      @@opengreenenergy nice cant wait

  • @iamnext420
    @iamnext420 Год назад

    Can i used this battery in computer ups??

  • @YukitoEiri
    @YukitoEiri Год назад

    Hi, I really liked your model. Just what I'm looking for. The only point is that I use catl prism batteries. If I asked you, would you be able to change the dimensions of the case and cover for me? I am far from 3D graphics, I can increase the size myself, but in this case, the dimensions for the screen and the connector also increase, and I need to leave them as they are, since I also use xt60 and the screen is the same size ... Thank you!

  • @athrunzala5337
    @athrunzala5337 2 года назад

    Do I understand that the LifePo are not as hazardous to work with as Lithium ion batteries?

    • @jordanpack5571
      @jordanpack5571 10 месяцев назад

      What you’re asking is correct, FePO4 is a less dangerous cathode material than other chemistries such as NMC. However, LiFePO4 batteries are still Lithium Ion batteries.

    • @athrunzala5337
      @athrunzala5337 10 месяцев назад

      @@jordanpack5571 so the danger is still there . . what are the tolerances?

  • @sktech7058
    @sktech7058 2 года назад +1

    Are This parts are available in india

  • @boasnovasonline8764
    @boasnovasonline8764 2 года назад

    ola meu querido me tire um grande duvida, bateria de nobreak serve para substituir as da bike elétrica???posso colocar 4 bateria de nobreak na bike elétrica o que acontece??da paera rodar um alternador de 6 bobinas com um controlador de 350w 36 a 48 usando 4 bateria de nobreak?minhas bateria são de 7 Ah

  • @dalubhasalegend
    @dalubhasalegend 2 года назад

    Ganda nman po nyan my shop po ba kyong pwdeng bilan ng mga gawa nyong gnyan sir,,salamat po

  • @georgeagsamosam7353
    @georgeagsamosam7353 2 года назад

    good very nice and clean. how to order the product sir and how much I plan to buy your product.

  • @LA-Creative
    @LA-Creative Год назад

    Dude this so cool. So nice of you to share your cad too. You should sell these tho! 👏

  • @priyalakshmi1216
    @priyalakshmi1216 2 года назад

    I want need this product . So please purchase link details

  • @test-193
    @test-193 2 года назад +6

    Nice video! However, your XT-60 is not mounted correctly. It’s supposed to be mounted from inside. So that the screws used on the outside pull the connector tight. Also, the XT-90 version is a better choice for more current capacity.
    I’d love to see another 4 LFP cells in that box.(4S2P) for greater overall Watthours. (Ie -more capacity). Try staggering the cells instead of the “flat” matrix. If the box needs to be just a tiny bit bigger, it would be worth it to have double the capacity, and double the current delivery.
    Great job with these. Keep up the good work.

  • @singuyen305
    @singuyen305 2 года назад +1

    Congratulation!.......A very nice Design!

  • @TOK178
    @TOK178 2 года назад

    Thanks for the great videos.
    I also build this battery bank, but my question is,
    can I connect two of this battery banks in parallel to get the double capacity?

    • @jimmatrix7244
      @jimmatrix7244 Год назад

      Certainly! Just need a larger container and appropriate BMS.

  • @-m-n-s-
    @-m-n-s- 2 года назад +1

    Since the video is in the suggested ones.
    This will not work in a UPS.
    30A is not enough for a UPS, the operating mode is not suitable, it is very expensive.

  • @ajayyadav-vl7wf
    @ajayyadav-vl7wf 2 года назад

    Tyar karne ki cost kya aate hai

  • @NutScrewGamer
    @NutScrewGamer 2 года назад +3

    I've always wanted to build these batteries. Unfortunately, I only have 3 lithium ion batteries and I don't have the budget to buy more.
    I don't trust those cheap "1500mah" batteries from China. Ordered once and it was very light.
    Was actually planning to keep some money to buy the more expensive stuff to serve me longer during a power outage

    • @opengreenenergy
      @opengreenenergy  2 года назад

      Nice 👍

    • @tabletcasacasa5523
      @tabletcasacasa5523 2 года назад

      buy laptop battery instead

    • @NutScrewGamer
      @NutScrewGamer 2 года назад

      @@tabletcasacasa5523 I can't find any in my local area. Online shopping is also not really an option since I have pretty bad time shopping online

  • @pitikaron
    @pitikaron 2 года назад

    happy to see this expensive spot welding can weld at once copper and nickel both 0.2mm.

  • @kenyajobs1069
    @kenyajobs1069 6 месяцев назад

    U shouldn't cut the bms whires, it makes rsistance of each too be different.
    Besids of that, tutorial is good, thx.

  • @techvaibhav3697
    @techvaibhav3697 2 года назад +2

    Ur alll videos r just amazing like I love the perfection of ur work❤❤

  • @sathiyabhama5154
    @sathiyabhama5154 Год назад

    Nice. Price please.

  • @RedEyedITguy
    @RedEyedITguy Год назад +3

    You can't call it a 12v battery if its 3s lithium and sits nominally at 10.8 volts. Good luck running any 12v devices besides a fan or a light bulb.

    • @Okhe133
      @Okhe133 11 месяцев назад

      After charge voltage increase my friend

    • @RedEyedITguy
      @RedEyedITguy 11 месяцев назад

      @@Okhe133 Yes yaar, but you're not maximizing usable range of the battery - lithium 18650 has a range from 3.8 when empty and 4.2 volts when charged:
      3.8v x 3 cells = 10.8v
      4.2v x 3 cells = 12.6v.
      This means your battery has a range from 10.8v to 12.6v. So when it's 100% charged you can call it 12v battery, but when it's 50% charged it will only have 10 or 11volts.
      You should use lithium iron phosphate (Lifepo4) 18650 battery in a 4s configuration for better 12v battery. They have charge range from 3.2v to 4v. This way minimum 12.8 volts and max is 16v.

    • @Okhe133
      @Okhe133 11 месяцев назад

      @@RedEyedITguy thank you very good information....but If I want to full charge can I charge it with 12v charger or I need 16v charger..

    • @Okhe133
      @Okhe133 11 месяцев назад

      @@RedEyedITguy hello sir please answer me

  • @welligtondorea90
    @welligtondorea90 2 года назад

    Onde comprar essa bateria

  • @JPToto
    @JPToto 2 года назад +4

    Well done! I'd like to build one of these to replace the terrible lead acid one in my kids' scooter. I _do_ miss the narration on this video so I hope you'll bring it back! And will you add an Instructable as well? I'm not complaining, you do great work. Thanks!

    • @opengreenenergy
      @opengreenenergy  2 года назад +2

      Thank you for your genuine feedback.
      I personally prefer voiceovers in my video but sometimes due to time constraints, I am forced to upload it without voiceover.

    • @JPToto
      @JPToto 2 года назад

      @@opengreenenergy I understand that. I've had to make similar compromises. Thanks again for your great content!

    • @anthonypelchat
      @anthonypelchat 2 года назад

      @@eone2345 I'm curious which cells you used to replace your car battery and what was the cost. I'm sure that it's LFP since li-ion wouldn't charge right from the alternator. Just which size and brand?

  • @arsentimirov4438
    @arsentimirov4438 2 года назад

    акум получился хороший единственная проблема это этот индикатор заряда. в общем индикатор надо соединять через кнопку иначе он высаживает акум в ноль, у меня там 2 банки умерло от переразряда

  • @soumennandi5128
    @soumennandi5128 Год назад

    Buy link

  • @KarthikHandlooms
    @KarthikHandlooms 2 года назад +1

    Hi green battery price

  • @casualsideofficial
    @casualsideofficial 2 года назад +1

    Excellent 👍🏻

  • @hondayamaha3
    @hondayamaha3 2 года назад +1

    Nice content. Very useful

  • @bubundhar
    @bubundhar Год назад

    where is your load test ?

  • @darthfate2139
    @darthfate2139 2 года назад

    This can be used only with ups where only smal amount of packs is used. It cant be used in high voltage battery systems like 8x12V. If one battery is depleted and BMS shut it down, then ohers wil reverse voltage on that battery and single BMS cant handle this and will burn,...

  • @sivakumarbv22
    @sivakumarbv22 2 года назад

    Nice project , female connector is better , to avoid short circuit

    • @jasonkeen7108
      @jasonkeen7108 2 года назад

      Can always print a cover for the socket after all used the 3d printer to print the battery case

  • @CL-yp1bs
    @CL-yp1bs 2 года назад +1

    Are you sure that BMS can even handle enough power to run your computer off your UPS? This seems very under built...

  • @omprakashrout12
    @omprakashrout12 2 года назад +1

    very useful 👍👍

  • @edwinaquino2886
    @edwinaquino2886 Год назад

    Very impressive

  • @antonbakker2475
    @antonbakker2475 2 года назад +1

    Nice project. A few remarks: The connector is better to use a female instead of a male. Less chance of accidentally short circuiting. Second, you're missing a fuse. You really need to fuse those otherwise they will explode. Thirdly, don't solder on the battery itself. It's difficult to heat up and it may damage the battery. Always solder on the nickel strip away from the battery. Also, be careful with your charger. Lead acid chargers are a lot different than lead-acid chargers.

  • @இராகண்ணன்
    @இராகண்ணன் 2 года назад

    என்ன விலை எங்கு வாங்குவது எப்படி கிடைக்கும்

  • @artistdogmom
    @artistdogmom 2 года назад +1

    nice 🤝

  • @AHMED_Q0
    @AHMED_Q0 2 года назад

    3.2v هذه ال pms مخصص ل ليثيوم

  • @b7chandan
    @b7chandan 2 года назад

    Good channel

  • @mdaslamknl
    @mdaslamknl 2 года назад +1

    Excellent
    Can you share, the stl file
    Thanks

  • @uddinsk
    @uddinsk 2 года назад

    DO U SELL

  • @VovelPunch
    @VovelPunch 2 года назад +1

    Plastic is very green

    • @jervis206
      @jervis206 2 года назад

      You mean the reusable lithium battery packs
      Yes they are
      At least more than a lead-acid battery

  • @narendrakhona1168
    @narendrakhona1168 2 года назад

    NEEDS CAPTIONS, & OTHER INFO

  • @sagarraj9212
    @sagarraj9212 2 года назад

    Hume bhi ek 12 volt ki lithium-ion battery chahiye aap hume bhej sakte hai

  • @onlineshoppingjakarta7338
    @onlineshoppingjakarta7338 2 года назад

    I have a li on battery for my motorcycle. They do not last long maybe a year or 2 years.

  • @solortamiltech620
    @solortamiltech620 2 года назад +1

    First view from India

  • @parthkalariya8586
    @parthkalariya8586 8 месяцев назад +1

    I want to buy this batteries in bult Quantity... Kindly contact us

  • @MichaelOkon-d9z
    @MichaelOkon-d9z 6 месяцев назад

    Impressive

  • @soumennandi5128
    @soumennandi5128 Год назад

    I need to buy

  • @simorafit-io5fs
    @simorafit-io5fs 9 месяцев назад

    ❤❤❤

  • @saddamdigitalsavakandra1291
    @saddamdigitalsavakandra1291 2 года назад +1

    Amazing

  • @LA-Creative
    @LA-Creative Год назад

    Or at least sell the empty cases with battery meter. 😎

  • @RADIANTTOYSREPAIRANDSERVICES
    @RADIANTTOYSREPAIRANDSERVICES 9 месяцев назад

    Sir please can you give your number I need one customized battery holder please can you make

  • @Ahmedhkad
    @Ahmedhkad 2 года назад

    I don't see UPS and no test ? why that much batteries? I won't talk about how danger this bms board with no real balance, don't use this at home

  • @gopronomad4381
    @gopronomad4381 Год назад

    DISLIKE because while this works well with lifepo4, the title indicates this could also work with li-ion and this video does not discuss the issue of voltage difference between a standard ups that outputs up to 13+ volts into a li-ion. BMS could fail causing the battery to get over charged which is a fire hazard.

  • @janglur
    @janglur Год назад

    The voltage difference between SLA and Lithium batteries is not insignificant, the BMS will NOT be able to mitigate this.
    This is NOT a safe hack and should NOT be used!

  • @davidepiccini9254
    @davidepiccini9254 2 года назад +1

    Wow

  • @DiyTechTube869
    @DiyTechTube869 2 года назад +1

    This components are very expensive

    • @DiyTechTube869
      @DiyTechTube869 2 года назад

      If you reading this reply please make cheap 12v battery kuch new chiso se

  • @jordanpack5571
    @jordanpack5571 10 месяцев назад

    LiFePO4 batteries are still Lithium Ion batteries. Come on.

  • @bentheguru4986
    @bentheguru4986 2 года назад +1

    Oh, battery is the easy bit. You can't just put different chemistry batteries into UPS's and the like and expect them to work or last. You need to modify the UPS battery settings to have a hope, foolish to just swap and expect to work.

  • @sopansofyan739
    @sopansofyan739 2 месяца назад

    Impianku

  • @nourshafei4308
    @nourshafei4308 2 года назад +1

    2nd

  • @JimNichols
    @JimNichols 2 года назад

    The mandatory horrible music to watch an otherwise informative video was not worth the cost. ...

  • @AKT-d8d
    @AKT-d8d 2 года назад

    They don’t know how to solder. Look not professional

  • @schranzwar
    @schranzwar 2 года назад

    this is not green energy this is very bad