In our experience, you dont have to, its very sticky , just make sure to press down enough so the ring gets a good hold with your phone. You can wait 24hrs to feel comfortable, but we never did , and it held pretty good.
this one i have on my other phone , still pretty stiff almost like new but i dont use the phone as much as my other one, so its hard to say, it has your scratches and paint chip, but still functions.
JimmyCricket61258 its your typical diameter size about 1.4inch like the other phone ring holder we reviewed, we put it on an iphone 7 a small phone compare to other smart phones out there, so that might make it look bigger in the video. 👍
i would say the fitfort one only because we had that longer and it still works, it has your typical scratches but everthing else is still intact the ring is still attach the stiffness is not 100% but it can still hold the phone, we made a video update on it, if you want to check it its here ruclips.net/video/D7c5ovfswHY/видео.html
Hi guys That all depends on how strong the magnetic holder, like how strong the magnet they put inside the mount, ive tried it on a fitfort magnetic mount, it worked well.
thats interesting, looking at the oneplus 7 pro online it looks like the back part of the phone is metal? we tried the phone ring holder on different surfaces plastic flexible rubber case even carbon fiber and it stuck, the only material it didnt stuck to was silicone, if its not sticking on yours, i suggest just returning it. Hope this helps
If it’s plastic it should stick , if it’s more like rubber or silicone it won’t hold, so in your phone with a plastic back should be ok. Make sure to subscribe, let us know how it turned out.
yes but remember this sticky double sided tape holds very strong, if you put it on your phone directly it will be hard taking it off. make sure to subscribe
similar to this video, ruclips.net/video/D7c5ovfswHY/видео.html but you might get away with just peeling it off with your finger first but if you have issue try the video link for us it was easier to take it off from the ring holder than taking it off between the phone and ring holder
Sorry for the late reply guys, i tried it on carbon fiber and it did stick, if you still feel uneasy, you can always return it if didnt work. We hope that helps 😀
Can it protect my phone camera if my phone is placed on a flat surface.
It should since the grip will raise it from the surface
My phone grip doesn't open the ring.. is it because it's the old version?
I read your supposed to keep it on for 24 hours before you use it is that true?
In our experience, you dont have to, its very sticky , just make sure to press down enough so the ring gets a good hold with your phone. You can wait 24hrs to feel comfortable, but we never did , and it held pretty good.
Its very cool
hi guys! thank you
How is this one holding up after 4 months? Still as stiff and is it in good shape?
this one i have on my other phone , still pretty stiff almost like new but i dont use the phone as much as my other one, so its hard to say, it has your scratches and paint chip, but still functions.
The ring is really big.
JimmyCricket61258 its your typical diameter size about 1.4inch like the other phone ring holder we reviewed, we put it on an iphone 7 a small phone compare to other smart phones out there, so that might make it look bigger in the video. 👍
Does it stick to silicone cases
unfortunately this will not stick to silicone cases, thanks for asking though.
Now after while which one should I get Fitfort or Syncwire?
both are good, i would lean a little more on the fitfort just because i had it longer and they have updated colors and finishes.
Good reviews on Amazon
hi guys , ours has the usual scuff and scratched but the ring is still stiff , not like it was before but still holding up well
Would you recommend this, or the fitfort one? and why? thanks!
i would say the fitfort one only because we had that longer and it still works, it has your typical scratches but everthing else is still intact the ring is still attach the stiffness is not 100% but it can still hold the phone, we made a video update on it, if you want to check it its here ruclips.net/video/D7c5ovfswHY/видео.html
@@PMR4Uŵ
Can you still wireless charge??
hi guys , it will not wireless charge, it will get in the way unless you have it on a case and you take it off when charging.
Does it hold well when attached to a magnetic cell phone holder?
Hi guys That all depends on how strong the magnetic holder, like how strong the magnet they put inside the mount, ive tried it on a fitfort magnetic mount, it worked well.
sooooooo glad i watched this before i put mine on
🙌 hopefully it worked out! Subscribe guys!
I got the black one and it stuck great to my Moto G7 power.
I just got the silver one but it won't stay on my oneplus 7 pro.
Any suggestions?
thats interesting, looking at the oneplus 7 pro online it looks like the back part of the phone is metal? we tried the phone ring holder on different surfaces plastic flexible rubber case even carbon fiber and it stuck, the only material it didnt stuck to was silicone, if its not sticking on yours, i suggest just returning it. Hope this helps
@@PMR4U I think the back of my phone is plastic. Thanks for the suggestion!
Hii can i stick it on my Samsung F62? It has got plastic back and pretty cheap prints
If it’s plastic it should stick , if it’s more like rubber or silicone it won’t hold, so in your phone with a plastic back should be ok. Make sure to subscribe, let us know how it turned out.
@@PMR4U so can i stick it without a case directly?
yes but remember this sticky double sided tape holds very strong, if you put it on your phone directly it will be hard taking it off. make sure to subscribe
@@PMR4U thanks
where is the 4 months update ?
Hi guys we did a quick update on the syncwire and fitfort ring holders here on this video ruclips.net/video/D7c5ovfswHY/видео.html
how do you change the adhesive?
similar to this video, ruclips.net/video/D7c5ovfswHY/видео.html but you might get away with just peeling it off with your finger first but if you have issue try the video link for us it was easier to take it off from the ring holder than taking it off between the phone and ring holder
Hi, will it stick on carbonfiber skin
Sorry for the late reply guys, i tried it on carbon fiber and it did stick, if you still feel uneasy, you can always return it if didnt work. We hope that helps 😀
Pls order web site
amzn.to/2vQmIEA hi guys make sure to subscribe
Over price
I respect your opinion