Lincoln 200M 4in1 Q&A | My thoughts after 18 months of use!
HTML-код
- Опубликовано: 28 июл 2024
- In today's video, I try to answer all the questions you had from the initial Lincoln 200M review video and my thought s after 18 months of use.
Below are the links referred to in the video.
Miller Welding Calculator
www.millerwelds.com/resources...
Lincoln 200M Foot Pedal
www.gasweld.com.au/foot-amptr...
Lincoln 200M User Manual
weldingtechnology.co.nz/sites...
00:00 Introduction
00:47 Welder Settings
03:46 Unimig Review?
05:44 Fan noise
07:09 Gas flow control
08:48 Foot pedal
10:35 Which gas?
11:22 Would I buy it again?
12:07 MIG welding alloy
13:32 TIG Polarity
13:59 MIG Synergic Mode
15:02 Wire roller sizes
15:46 Consumables
17:25 What would I change? 
Авто/Мото
You might have a dodgy gas solenoid on your mig, because this machine should definitely have automatic and adjustable gas control with the mig trigger, just like on the tig.
My Lincoln 200M has automtic gas control on the MIG side
Agreed, mine only uses gas when I press the trigger on the MIG. I rarely turn the bottle off unless I'm done for the day
Definetly something going on there thats an expensive mig otherwise ahah want to be working quick! Haha
Thanks for your vids and your time. Im happy with the machine to.
Awsome video mate it would definitely help out other guys wanting or already have the machine and your editing skills on the video was spot on
Thanks mate. Appreciate the support.
Hey mate. I have the same welder and had a crack at ally mig, 3mm with feed at 16m and 19v you have to move fast but worked well, I didn't change out the liner, just sent it and happy days. Hope this helps.
Hey mate great video I'm a qualified boilermaker have been for 17 years and iv never run the hand piece in negative unless welding stainless steel
After watching your trailer build I went out and purchased the same unit I find it so far an awsome unit have only done mig welding so far but want to try my hand at tig welding soon
Hey mate, Yeah its been a great unit for that sorta 'pro-hobby' level.
Thanks
I have the exact same welder, 100% rate it. For the price point, what you get for it, imo it a great value quality 4 in one. Got a spool gun for mine, way better than the Teflon liner setup, downside is the spool gun is bigger. My only gripe is the fan noise. I made a welding cart that has 2 bottles behind welder, one argon, one Argo shield, so the cord in middle doesn’t bother me as it come out between. Great video 👍
So does it weld alloy well, with the spool gun
@@nictidy8405 yeah sure does
That cart idea sounds ideal. Might have to make myself one like that.
@@Kenny_B sounds like motivation for a new video😉
Can you weld with a spool gun in synergic mode or only manual mode?
Hello. Have you ever tried the TIG Pulse feature at a low setting of one or two pulses per second, which can be helpful for some of us newbs for developing a rhythm & muscle memory.
Specs are confusing. It says HF ac tig and Lift start dc tig. I assume that's just a typo error and the HF will also operate for DC tig ?
Hi there, I’m mainly concerned with welding 1.2 mm mild steel panels on a classic car. Can you please advise on wire feed rate, amps and voltage as well as gas flow pressure? Also not sure of settings in the menu other then wire size. Thank you (manual is fairly useless here)
Can this machine stack dimes in mig on mild steel?
What did the trailer weigh unloaded. Been tossing a alloy trailer up for about three years but weight to price is the decider.
Hey mate, I didn't get around to weighing it unloaded. With the canopy full of camping gear (just thrown in loosely cuz i haven't done the proper canopy fitout yet), roof top tent on, and the buggy on the back, it weighed in right on 2,000kgs
With the Lincoln 200M being a bit longer than a lot of welders. What propriety welding cart did you find that was suitable. Or did you build your own….?
If so, have you got any info, sketches etc that would assist in me building a similar cart please.
Hey mate, have a look at my most recent video on the Tri Machine Welder Cart. That’s what I’m using now. In the video I also show the previous cart and the top shelf I folded up out of aluminium for it to fit the longer welder 👍🏼
@@Kenny_BSweet. Thanks for prompt reply.
Edit: Subsequent to your reply.
I have just ordered the WTC-800 Tri-cart welding trolley from H&F. Thanks to the excellent information on this vid and the cart vid you recommended. You have saved me from a lot of deliberation and possibly getting a sub-standard item. Thanks heaps.
Bought you a coffee too… (seems not much of a thank-you really, but enjoy it anyway).
Is the review of the RAZOR 200 PULSE still coming?
Hey mate, yeah it definitely is. It's sitting in my shed in the box. I'm currently trying to get all the videos from my recent Cape York trip done then i'm back onto the toy hauler build and other welding projects which will include the review of the Unimig.
How’s the dogs eye site going?
She seems ok 😂 might have to get her some welding goggles
Hampdon sell a better foot pedal for about the same price, it’s a bit wider. I run a CK worldwide tig torch with it and it’s unreal, the original torch is a bit short for my liking
Thanks mate. I just bought a new Unimig machine to review. Will probably sell this one to a mate. It’s served me well, just keen to try a unit that does double pulse mig 👍🏼
The gas on the mig is a problem, it should shut off with the trigger . I m looking at buying this machine but not if the gas keeps running all day. Never see the gas keep running on a mig even cheapo ones .
I have this machine and my gas shuts off with the mig trigger like any normal mig
@@benw6088 thanks mate, he has a problem with his then.
Unimig pulse isn’t AC tig.
Yeah, it is. Check out the Razor 200 Pulse MIG model (part number PK11080). I'm about to buy one to review.
@@Kenny_B nope. If you want to AC tig you need their tig machine not this mig
@@Kenny_B I looked at this model and it is DC tig. It has pulse but no AC. I have brought a Strata Advance Multi 205 machine that has single pulse mig as well AC/DC. But most machines don't have AC/DC tig and pulse mig in the same machine.
i have a unimig razor 180 ? Mig welder , it is garbage , none consistent welding , regret my purchase still after 5 years , will not buy unimig again ,
Really? Hopefully the new units are better because a literally just bought one. Haven't used it yet.