Nice truck! I've wanted one for a few years and bought an '04. They sure ride rough and don't fit us tall folks real good - I have to duck at stop lights to see them! lol
Thanks! I go through the same issues with stop lights. I’m definitely a fan though. I’m going to invest in the 4 inch Superlift to hopefully make it ride better than the setup I have on it now
Lift Kit: MaxTrac Suspension® - 3" x 2" Front and Rear Suspension Lift #K883032C Front Shocks: Rancho® - RS5000™X Front Driver or Passenger Side Twin-Tube Shock Absorber #RS55374 Rear Shocks: Rancho® - RS5000™X Rear Driver or Passenger Side Twin-Tube Shock Absorber #RS55126 I bought all of these from CARiD.com. If you look these up they should pop up!
Hey man you know how many inches your truck sits from the bottom of the front fender to the ground? Just cranked my torsion bars in 2006 4x4, sitting above 35 inches now, like to fit 32's tires but wish don't think I can fit 33's.
Off the top of my head I don’t know the exact measurements. A stock key cranked would be able to fit a 265/75r16 without rubbing. Mine are 285/75r16 and I had to use 2 inch wheel spacers and trim the bumper to keep it from rubbing, and that’s with 1-3 inch lift keys
I have 285/75/16 on my 2002 Edge 4WD and they fit with 2" lift blocks added to the OEM lift blocks and torsion bars are raised. Not sure how much extra twist on the bars as I bought it this way. Truck has the OEM fender flares, no wheel spacers. The tires seem to fit alright.
I have 33s on mine and I just have it about 3” above stock then only thing is their 12.5 wide so they rub at full turn so you just can’t crank the wheel as far
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Nice truck! I've wanted one for a few years and bought an '04. They sure ride rough and don't fit us tall folks real good - I have to duck at stop lights to see them! lol
Thanks! I go through the same issues with stop lights. I’m definitely a fan though. I’m going to invest in the 4 inch Superlift to hopefully make it ride better than the setup I have on it now
Whats the gas mileage like did it drop crazy?
Bro, did you just change your tires in a parking lot on/near the Main Side?
Mans gotta do what mans gotta do
There page is called curbside mechanics 😂😂
What size
I looked up that lift and its coming up as a 2wd so did you use a 2wd kit ?
The rear leaf spring shackles could be used on a 2wd, but for the front I used a torsion bar key lift, which is only for the 4x4.
Do you have wheel spacers on it??
Oh yeah, 2 inch wheel spacers! We made a video about it!
Can I get the link of the lift kit? Clean truck 👌
Lift Kit: MaxTrac Suspension® - 3" x 2" Front and Rear Suspension Lift #K883032C
Front Shocks: Rancho® - RS5000™X Front Driver or Passenger Side Twin-Tube Shock Absorber #RS55374
Rear Shocks: Rancho® - RS5000™X Rear Driver or Passenger Side Twin-Tube Shock Absorber #RS55126
I bought all of these from CARiD.com. If you look these up they should pop up!
Hey man you know how many inches your truck sits from the bottom of the front fender to the ground? Just cranked my torsion bars in 2006 4x4, sitting above 35 inches now, like to fit 32's tires but wish don't think I can fit 33's.
Off the top of my head I don’t know the exact measurements. A stock key cranked would be able to fit a 265/75r16 without rubbing. Mine are 285/75r16 and I had to use 2 inch wheel spacers and trim the bumper to keep it from rubbing, and that’s with 1-3 inch lift keys
I have 285/75/16 on my 2002 Edge 4WD and they fit with 2" lift blocks added to the OEM lift blocks and torsion bars are raised. Not sure how much extra twist on the bars as I bought it this way. Truck has the OEM fender flares, no wheel spacers. The tires seem to fit alright.
I have 33s on mine and I just have it about 3” above stock then only thing is their 12.5 wide so they rub at full turn so you just can’t crank the wheel as far
Where did you get the side plates from
The wheel spacers? I got those some Amazon. KSP performance brand
Que medida son las llantas y neumáticos?
What size rims and offset? Got a link?
They’re 16in by 8in rims with a 0 offset. I’m also running 2 inch wheel spacers. I got them from Custom Offsets. The rims are Vision Soft 8s
The rims is 10x8?
@@tiagogomezvlogs2489 16x8🤦♂️
What size are the rims ?.
16in tall by 8in wide
What size of wheels and tire
They are 285/75r16. So about a 33 inch tire
On a 16 inch rim?
Do they feel much heavier when driving?
Why do people in the army in the USA feel the need to wear their uniform everywhere?
They’re prob on base in the parking lot at the barracks working on the truck hence roadside mechanic
Also not the army but Marines which are not allowed to wear there uniforms in town anyway so yes on base
Only wear uniform to and from work if you love off base, kerl. This fella is on base.
..the Sawzall thing has become really pathetic....