That thing is insane!!!! Question, what if you put a long travel kit on the old one and put 33” tires on it. Start your own mini trophy trucks. I think that would be sick!! This way you would have something for bad weather, mud, snow and jumps, lots of jumps. Last time I will say it, thank you.
Awesome your improving the platform day by day and it's excellent content to watch!!!! My dad used to do auto grass racing wen I was a kid so I love Watching how things have came on over the years and your taking it to another level!!! Love watching it.
Ok I didn’t know a v8 hyabusa engine was a thing I had to look it up. It’s crazy made in America a 3.0 liter 450 hp naturally aspirated or a 800 hp twin turbo 2.8 wow both at 10,500 rpm
I didn't know you could adjust the wheel base. That's wicked. I'm sure you could pull some wheelie donuts with different tires. Having a more balanced weight distribution I'm sure is a lot less sketchy at high speed though. Probably fun to drive with less understeer for a change too. Nice to have both setups and you look to have them both under control. ✌️
Sir Liam, u could make a fortune building and selling them in the U.S LoL. There should be a racing series with these trucks. That would be a spectacle. Keep having fun. Thanks for the Laughs.
There is an ls version too. It needs to be connected to a gbz gearbox. Ls engines are hard to come by over here as GM do not support Europe. So parts have to be imported from the US and the shipping is the issue
Bro you can’t stand on the limiter anymore on wheeles that v8 if to heavy but why isn’t it set up mid engine . That’s my favorite thing about the truck . By the way what’s your trucks names
so how does the power to to the wheels? is the transmission a transaxle with IRS independent rear suspension or does it have a chain or belt going from transmission to a solid axle?
6 дней назад+1
The video shows how it's configured but to answer the question its a Transverse Gearbox [ front wheel drive style ] driving two driveshaft's with independent rear Trailing arms , standard setup now for car engined class 7's , couple of transaxle style class 10's running but they're old school 350 small blocks if i remember correctly , ideally you want all the rear weight across the axle line and the new modern smaller v8 engines and billet gear boxes allow for this configuration to work best now
I like to think that Ken Block is looking down from above, with a smile thinking, "Liam built a Minicorn, carry that torch Liam." “Dream it. Believe it. Build it.” - Ken Block
9 дней назад+1
All for the shits and giggles on youtube but will we see it on the dirt racing with the rest of them ????
so you went from mini V1 to mini V2. basically exactly what ken block did when he upped from hoonicorn V1 to hoonicorn V2. so you are the next ken block huh liam?
ts funny because normally big people dont drive fast cars like this or snowboard or do anything crazy its always the small people doing fun shit like this so to see a bigger person having allot of fun is pretty ccol
That thing is insane!!!! Question, what if you put a long travel kit on the old one and put 33” tires on it. Start your own mini trophy trucks. I think that would be sick!! This way you would have something for bad weather, mud, snow and jumps, lots of jumps. Last time I will say it, thank you.
Coolest thing I’ve seen in ages!
Ever since i heard of the busa V8 I've wanted to see it in and running in a cool project and it didn't disappoint😁👍
Awesome new truck !🙌
That is insane looks almost identical to the other one congratulations
Awesome your improving the platform day by day and it's excellent content to watch!!!! My dad used to do auto grass racing wen I was a kid so I love Watching how things have came on over the years and your taking it to another level!!! Love watching it.
Loving the new ride
And all your content
Keep up the good work 👍👍
On the money with that bro.. 10.10
That thing is insane!!! 🔥 God I want to drive it. 😂😂😂
Ok I didn’t know a v8 hyabusa engine was a thing I had to look it up. It’s crazy made in America a 3.0 liter 450 hp naturally aspirated or a 800 hp twin turbo 2.8 wow both at 10,500 rpm
Liam all I can say is rad car mate a monster mini great video and hard work all
Here we go again hell yeah looks alsome well done 👏
I didn't know you could adjust the wheel base. That's wicked. I'm sure you could pull some wheelie donuts with different tires. Having a more balanced weight distribution I'm sure is a lot less sketchy at high speed though. Probably fun to drive with less understeer for a change too. Nice to have both setups and you look to have them both under control. ✌️
RPE v8 with 72degree v Nice 😊
F'n sweet man...now it's all about tires and grip🎉🎉🎉🎉🎉🎉🎉
the 360 chase cam looks like an amazing videogame with how ridiculously quick this thing moves
#1 No Timing the Transmissions #2 Throttle Response Sounds Criper and quicker 🤘🤘💚
Awesomeness
Is that the radical v8 engine
Yup
Awesome
Love it a damn go cart on steroids 💪🏼🤣
Camera angle looks sick as f#£k on back of the mini 👌
Next step....2 Hayabusa v8s! (Or turbo)
You got that from Radical didn't you. Knew it!
Nice.
I was going to say why dont you..
Lucky enough to witness this at NEC that week.
That will surely get under 10 seconds at santapod with the better balance.
You built it!!🤣🤣🤣
I was like no hayabusa had a v8 .... then I googled it insane engine
Knew you would put that engine in it. 👍
It isn't a different car. He bought this one from a guy called Mark Mulholland. It is about four years old now.
Adjustable axcel is as WILD as the New Engine !!!
Sir Liam, u could make a fortune building and selling them in the U.S LoL. There should be a racing series with these trucks. That would be a spectacle. Keep having fun. Thanks for the Laughs.
There IS a rece series... autograss in Europe...
Unless you meant in the states, then i 100% agree. Should add it to the Nitrocross line up.
There is an ls version too. It needs to be connected to a gbz gearbox. Ls engines are hard to come by over here as GM do not support Europe. So parts have to be imported from the US and the shipping is the issue
love it but want to see it at Pikes peak
So fucking sick 👏👏👏
Sick man! One of these days, I'll be able to afford a 30k engine too
Nice Liam a v8 visa engine that’s awesome and what power that putting out now mate
Gear it for the 1/4 and send it down Bradenton.. i heard some guy you know just became a part owner there im sure he'd love to see it
Cleetus already had his 5 seconds of fame
Still won’t be able to hang with Andy holtby or Cameron mills in class 7 😂😂
Did you gain more HP
Bro you can’t stand on the limiter anymore on wheeles that v8 if to heavy but why isn’t it set up mid engine . That’s my favorite thing about the truck . By the way what’s your trucks names
I did wonder what it was. See it at the show and thought it’s not the normal car. Assuming you’ve left it in the USA 🇺🇸
so how does the power to to the wheels? is the transmission a transaxle with IRS independent rear suspension or does it have a chain or belt going from transmission to a solid axle?
The video shows how it's configured but to answer the question its a Transverse Gearbox [ front wheel drive style ] driving two driveshaft's with independent rear Trailing arms , standard setup now for car engined class 7's , couple of transaxle style class 10's running but they're old school 350 small blocks if i remember correctly , ideally you want all the rear weight across the axle line and the new modern smaller v8 engines and billet gear boxes allow for this configuration to work best now
Is that a Tesla Plaid tow vehicle??? lolo Wow
The Mini truck with Tesla powertrain could be fun. Loads of instant torque for playing. Needs a small light battery obviously.
I want one 🎉
You going to sell your old one to cleetus???
I like to think that Ken Block is looking down from above, with a smile thinking, "Liam built a Minicorn, carry that torch Liam."
“Dream it. Believe it. Build it.” - Ken Block
All for the shits and giggles on youtube but will we see it on the dirt racing with the rest of them ????
Time for a turbo buddy, you and cleetus should be able to make that thing 1 to .90 hp to weight ratio!!!
Is this the first test drive ? 😂
That truck is begging for a Cars, TowMater livery.
that thng doesnt need a supercharger but.......why fking not
How much money does it take to throw one of those things together?🤔
With what Liam is running there about £70.000 / 80.000 Dollars US
Was it chilly in that warehouse? Call you Liam “chilly nipples” Doran.
@@Payton-x3y I think I was just arroused mate
@@LiamDoran33 Liam “Cars get me Hard” Doran
@@LiamDoran33 Liam “cars get me hard” Doran
@@LiamDoran33 Think I would have been to after driving that! 😊
Is not all that so much better out there....trying g uk autograss faster out there
Wtf is this title? Lol.
so you went from mini V1 to mini V2. basically exactly what ken block did when he upped from hoonicorn V1 to hoonicorn V2. so you are the next ken block huh liam?
H2r better
Turbos aren't permitted for bike engines in autograss. But yes, the H2R would work well in one of these.
Music is rubbish.....
ts funny because normally big people dont drive fast cars like this or snowboard or do anything crazy its always the small people doing fun shit like this so to see a bigger person having allot of fun is pretty ccol
Good for weight distribution
Liam: great vid thank you - is the a contact-e-mail for you ?