5 Quick DRILL PRESS Hacks - Woodworking Tips and Tricks
HTML-код
- Опубликовано: 15 окт 2017
- In this video we review 5 woodworking tips for your drill press.
The Drill Press is often and after-thought tool, but once you get one you can't imagine living without, but it's the one tool where accessories can really make a difference in your drilling, like drill press vice, sanding drums, a set of forstner bits, brad tipped drill bits, twist bit drill bits and so on and to make them all quicker and easier to use, I have adapted my drill press area more convenient to use them these drills.
******************
Woodworking Tips and Tricks Playlist: • Woodworking Tool Tips
5 Woodworking Hacks for Clamps: • Woodworking Tips and T...
5 Woodworking Tips for the Table Saw: • 5 Quick Table Saw Hack...
******************
**** Learn more about Drill Press Tips with the Full Article here: goo.gl/jSDCP9
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb
** Connect with me on Google+: goo.gl/7fotJq Хобби
I simply love the guy. I think he's one of the most honest woodworkers (ie not commercially oriented) on YT. Straight and forward tips and I've learned a lot from him. Please keep them coming, Colin, good work there. PS: the plate tip was a WOW moment for me.
Thank you for the great comment and thanks for watching!
I like the way Colin has that little laugh when he points out the little simple inventions that he builds for his not so big tools.😆
Great tips & hacks Colin! Always enjoy your videos.............. Thanks, Steve
I love the end drilling idea. I made the squaring blocks you discussed several months ago and now they have another use. Love your videos, thank you from Minnesota
I may not always comment Colin but I do watch and enjoy all of your videos on your shop hacks keep up the good work my friend.
I love when he chuckles @ stuff, super wholesome
Thanks for the tips on the Drill press especially the end grain drilling Colin.
Thanks Colin,pretty good stuff.
More great tips Colin thanks I like the magnet for the chuck key
Always looking forward to your next video and excited when I new one is released! Thanks for sharing all of your tricks and experience!
Your hack for the drill key is a good idea. I solved the problem in a different way.. I have a ratchet drill key attached to a three foot fine chain,( so it never walks away!). It always sits on the side of the bench. After I tighten the drill chuck, I immediately set the ratchet to the off position so it is ready to remove the drill bit when I am finished.
thanks for the video!
Thanks Colin. Really informative videos. Look forward to many more
magnet idea is fabulous!
Great shop upgrades!! Thanks!
Love these hacks sir. As soon as as my woodwork shop is finished I intend to use a lot of these.
Love all your tips. I´ll be sure to pass them on to my woodshop students over here in Sweden.
Great tips! Thanks for sharing.
Can't thank you enough. Now the drill is like a whole new tool.
Very useful tips. Thanks!
Good tips. Thank you.
Thanks Colin that was great! Can't wait for the next 5 tips!
Love your enthusiasm and tips for woodworking! I'm on a few projects, and can't wait to try these out. Thank you! 🛠
Thank you so much for these hacks. They sure will help me a lot
I'm a big fan of jigs. The vertical jig is simple yet elegant. Gonna make one this weekend. Thanks for the great vids!
Useful stuff Colin. Thanks
Good friendly vid..thanks enjoyed it
Thanks for the tips.
Great tips, thanks
Useful tips. Many Thanks
Great tips Colin. Love the sanding block idea.
I dont mean to be off topic but does any of you know of a method to log back into an Instagram account??
I stupidly lost the login password. I appreciate any help you can give me
Thanks for this! Really enjoyed it 👍
Great tips as always Collin.We all appreciate you Sharing your knowledge and experience with us.
You're Welcome, Joe!
You sir do know your stuff. I love these tip vids.
Great ideas thank you.
Colin, you have the most incredible ideas for drill press guys, like me. As a matter of fact, I just came in from my laundry/wood shop after using the drill press. I just ran back out and put your magnet and pie-plate trick to work. Tomorrow I'll dig out my large, right-angle "squares" and matching clamps and keep them nearby. Still looking for a good machinist's vise. Looking forward to catching up on your other videos. Thanks a million.
Wow!! Great Tips!!!
A lot of good stuff as usual Colin. I'll be taking a couple of arms of my press tomorrow morning
Excellent tips! I love watching your videos (or 'tutorials') Cheers
Thanks bub
Love your tips
Awesome quick and easy tips...................thanks
I always learn something new and useful from your videos! Thanks for sharing your wisdom with us!
really helpful thank you
Great video. I recently bought a new drill press. I'm still trying it out. Your video helped me a lot. Thanks for sharing.
Nice vid mate, especially liked the vertical clamp jig. Thanks for sharing!
You're welcome Mark
Awesome !
I'm really enjoying these tip videos. Keep them coming.
Brilliant Tips once again ⭐️⭐️⭐️⭐️👍
Nice tips, think I will be using many of them in my shop now.
This is great. Lots of tips
Great tips as alwsys Colin thanks.
These are very helpful tips. Thanks for sharing
Thanks Colin - as always appreciating your friendly sharing of tips. I have noticed other folks offering amazon affiliate links and don't know if you use them but it can be handy when you know a good product and want to recommend like the magnets in this video. Thanks again!
love your giggle man
You're a natural in front of the camera. Thanks for the tips!
Excellent
One of my favourite channels!
thank you!
Great tips as always. Thanks for sharing Colin.
Thanks for watching Josh!
Cool tips. I like the end grain holder. I need to make a couple of those.
I like your hacks and chuckle!
Love the closing laugh / giggle. Signature pro move! :) u da man.
Great tips. Thanks for sharing.
I have a small magnetic dish on top of the drill press. There I keep my drill chuck and the screws for the vice. The vice itself I leave on the moveable platform or at the foot of the
drill press. That dust dish will come in very handy.
My wife found me an old Chicago electric today for $20 at a thrift store. Sweet tip about using the sanding pucks on a that plane! Thank you!
Thank you.
thank you. I want a drill press so much always have. One day I will get one. Your tips will come in very handy.
Dude...your are a genius. I love your videos.
Form a fellow drill press lover....good tips...from down under.
the single handle and pie plate I will surely start using, thanks again
Using the one bar is genius. Did that on mine and love it. One of those why didn't I think of that Things. Thanks
Some great tips here! I plug my drill press into a foot switch to turn it off and on with my foot. Then should the drill jam i can easily turn it off and free up the drill without letting go of the vise or piece i"m drilling. For very little money it make the drill press much safer! Thanks for your great tips.
These are great tips. ❤❤
Good tips thanks.
Thanks for a great video.
Nice bunch of tips. Thanks for sharing. 📌📌📌
Great...
As usual ...
Thanks.
Все идеи хороши и просты. Спасибо вам огромное!
Thanks for the hacks. My drill press lives in the center of my home shop. It gets more use than all the rest of the shop combined.
Just the part about removing the lever bars was worth the watch, let alone the drum sanding platform, etc.! Great video. :-)
Good tips
Ergonimic guide hehe nice
I removed two of the arms from my drill press today and it is so much better! Many thanks for sharing this great idea. Also like the end drilling hack - must try that soon..
Mike Peacoc
Great tips always!! Thanks for sharing : )
Great stuff.
Super work sr
Really useful hacks my favorite is the plate hack
Very good.
Ya just got to love this channel. Great stuff~
Nice! I especially like the pie plate to help catch the dead tree carcass shavings!
more helpful best ideas to share it
Very Entertaining and informative video , thank you
I love it.
The pie plate is pure genius!
awesome tip just what i was looking for! i was looking for a bar solution bc they do get in the way! didnt know they used to be wheels. Thanks taking my 2 extra bars off now! :)
Awesome video, can you do another stressing the importance of using safety glasses along with a place to store them?
God I love youtube, you've changed my life Colin, that end grain drilling trick is great, cheers from New Zealand.
I have a Delta table model drill press inherited from my father in law. It was built in the 1950's in Milwaukee and has a single handle to raise and lower the spinning tool.
They knew back then that a single handle was sufficient.
Thanks for that, some really good tips on using a drill press. The last is not my cup of tea, prefer the broom to the risk of putting my drill bits through a pie plate, but I learned something new today, so it is all good.
Brilliant! I'm all over the first two.
Good hacks colin! I like the idea of unscrewing 2 of the levers I have that same problem and it's so annoying I like the sanding table, and clamping jig definitley doing both of those.. thanks for aharing ur ideas man!
I don't wait till the end of the videos anymore to show I like them because I always do.