Make sure your fittings are tight and run at least 10 gallons of water through the hose and the waste line to Swell the gaskets. they are made of cork and paper and need to swell to seal .. totally normal ! then run paint and it will never do it again as long as you keep liquid in it. put pump armor in it while in storage
Why are u trying to put down Graco sprayer Sometimes it comes with fabrication defects all you have to do call customer support they will send you brand new hose with some credits Customer service is very helpful and good Peace bro💪🏿
@@sonwasupI’ve had my x7 from Home Depot for over 5 years now. I’ve sprayed 2 exteriors, entire apartment building interiors, I did a few house interiors of just primer. I’ve done a deck, I’ve done lots of fences. I run water through it until it’s clear then put it up in my garage and a couple weeks ago I knocked the ice chunks off of it and ran 10 gallons of water through it to make sure it’s good for the summer side jobs. Might need a new suction hose set and a new handle filter and it will be just as good as the day I bought it. Graco haters are an odd bunch, just go buy an economy Titan sprayer and get less for more. Or a commercial Titan spray and throw a Graco hose and Graco SG3/contractor spray gun on it because you’re getting less for more when you buy anything other than Graco.
Perhatikan dengan benar sebelum komentar. Jika tidak salah lihat, disitu jelas ada kebocoran pada selang bukan pada sambungan hex adapter, tapi pada selang tepat sebelum adapter. Mungkin dari pabrik kurang kuat saat pengepresan.
Everyone commenting on the tightness of the fitting need to check their eyes. The leak is coming from behind the fitting and clearly leaking from the hose side. So, in this case, no amount of tightening will make a difference.
That is a second sealing area. It was not tight enough. It’s a seated seal. That nut is loose to the hose so you can turn the nut without twisting the hose
My titan 440 went down to be packed. I used one of the these. I gotta say it worked way better then I thought. Wish they had these years ago, nice throw always. I’m happy to have my commercial rig back though
Well I can tell you that they're not as good as they used to be my dad worked there from 1969 to 2005 . He'll tell you they're still good but nowhere near as good as they wear back in the day they don't break down as much but when they do it's not as easy to fix.
Make sure your fittings are tight and run at least 10 gallons of water through the hose and the waste line to Swell the gaskets. they are made of cork and paper and need to swell to seal .. totally normal ! then run paint and it will never do it again as long as you keep liquid in it. put pump armor in it while in storage
Good tip
Well if you are going to use enamel for the first run don’t use water? What should I use
I will try this. I have the same issue. -
So far this worked with water. Will try it with paint.
I would like to say that there is no cork or paper in that seal. It is a seated seal metal on metal. Just need to tighten it better.
Why are u trying to put down Graco sprayer
Sometimes it comes with fabrication defects all you have to do call customer support they will send you brand new hose with some credits
Customer service is very helpful and good
Peace bro💪🏿
When they want to do their jobs lmfao. Customer service simp
The only reason you could put down Grayco is for building a cheaper selling it cheaper for Home Depot. It’s not the same Graco sprayer.
@@sonwasupI’ve had my x7 from Home Depot for over 5 years now. I’ve sprayed 2 exteriors, entire apartment building interiors, I did a few house interiors of just primer. I’ve done a deck, I’ve done lots of fences. I run water through it until it’s clear then put it up in my garage and a couple weeks ago I knocked the ice chunks off of it and ran 10 gallons of water through it to make sure it’s good for the summer side jobs. Might need a new suction hose set and a new handle filter and it will be just as good as the day I bought it. Graco haters are an odd bunch, just go buy an economy Titan sprayer and get less for more. Or a commercial Titan spray and throw a Graco hose and Graco SG3/contractor spray gun on it because you’re getting less for more when you buy anything other than Graco.
@@sonwasupwhere do u buy the better Gracie and which graco do u recommend?
Run water first to make sure
You can easily avoid this (& having to buy more hoses), If you'd just...READ, THEN THE INSTRUCTIONS in your manual. 🤷🏾♂️🤷🏾♂️
Alguien me podria decir si con una maquina como esa puedo usar stain? Y si se puede con qué se limpia? Gracias🙏
Perhatikan dengan benar sebelum komentar. Jika tidak salah lihat, disitu jelas ada kebocoran pada selang bukan pada sambungan hex adapter, tapi pada selang tepat sebelum adapter. Mungkin dari pabrik kurang kuat saat pengepresan.
Use 2 wrenches to tighten your hose
Everyone commenting on the tightness of the fitting need to check their eyes. The leak is coming from behind the fitting and clearly leaking from the hose side. So, in this case, no amount of tightening will make a difference.
It’s either too tight or not tight enough
First time using this sprayer same thing happened. Is there a fix for this crap?
So much paint is wasted?
And what’s the learning curve - for real ?
Tighten your hose!
So is this machine good or not a good tool??
It had good reviews. Unfortunately it never worked and I returned it.
Did u buy it at home cheapo? That’s why, it’s not the same Graco
How is it not the same. I’m not trying to criticize just trying to understand. I got mine from Lowe’s and haven’t had any issue with it ever
Rell me your a beginner without telling me you are a beginner 😂
Everybody has to start somewhere dkhead
Rell me lol😂
Is it supposed to leak like that ?
HAHA, nope
Yes
Yes if it doesn't leak its no good
Mine did the exact same thing today. Looking like a new hose. What’s another $80? Lol
Tengo una que escapa pintura por debajo me puedes ayudar 😊
Que pasó amigo. Arreglaste tu sprayadora. Asme saber porfa. Así tengo la mía le empieza a salir pintura por debajo
Was it tightened by hand or with a wrench?
It was lightly tightened with a wrench. But it wasn't coming out by the nut, it must have been a defective hose or something.
That is a second sealing area. It was not tight enough. It’s a seated seal. That nut is loose to the hose so you can turn the nut without twisting the hose
@@Ryan809Not these hose. These will turn the hose if you tighten it, it's fixed to the hose. This is a defective hose.
If you had been watching the Idaho Painters channel, you would have used WD-40 on that connector and tightened it with a wrench
Yes, if you ran through the videos on RUclips even Graco tells you to run water through it ..test with water and check all your connections.
Mi manguera escupe mucha pintura Y pierde presión
Its not pushed in all the way. Thats all.
Same thing happened to me I only used it three times at best
Get a real sprayer. The home depot ones are junk
My titan 440 went down to be packed. I used one of the these. I gotta say it worked way better then I thought. Wish they had these years ago, nice throw always. I’m happy to have my commercial rig back though
What’s your commercial rig
I'd say your hose is a little to loose
As grandpa would say, "That don't look right."
So get the hose replace no big deal
I never said it was a big deal. Just sharing my experience with the tool as it was brand new.
Bro bought a thinking everything would go smooth 😅
Gotta tighten that down!
Hose fitting it looks like loose, Be Shure tighten all hose/gun Fittings
Yeap it happens . MOVE ON 😂😂😂🎉🎉🎉 or get a new hose 😮
Just tighten it
Just thight it happened the same to me
Happened to me the other day, just buy another hose
no, it didnt happened to you , stop lying for attention , no one cares about you
Another hose is $40+ Why should you buy another hose right away?
Crimp is bad happened to me the other day hose is garbage go get a new one
Thread tape
И что тут такого? Либо подтянуть шланг, либо шланг под замену 🤦♂️
ta todo meco… juste keep scrolling.
Hi
I dont think its supposed to do that
Well I can tell you that they're not as good as they used to be my dad worked there from 1969 to 2005 .
He'll tell you they're still good but nowhere near as good as they wear back in the day they don't break down as much but when they do it's not as easy to fix.