2022 Toyota Tundra Suspension Upgrade - Timbren SES (Suspension Enhancement System) Fix Towing Squat
HTML-код
- Опубликовано: 10 сен 2024
- amzn.to/48qapfi - Timbren SES TORTTNDR Suspension Enhancement System
amzn.to/3DiTPQG - Milwaukee 2567-20 M12 FUEL Brushless Lithium-Ion 3/8 in. Cordless High Speed Ratchet (Tool Only)
amzn.to/3pNDMr7 - Performance Tool W38181 3/8-Inch Drive Flex Head Long Ratchet
amzn.to/3XWrtp1 - GEARWRENCH 120XP GearBox™ Universal Spline XL Flex Head Ratcheting Wrench, 14mm - 86116
Just another quick video showing how I installed the Timbren SES (Suspension Enhancement System) Rear Suspension Upgrade on a 2022 Toyota Tundra TRD. This was a very easy install. This fixed the towing sag and squat. This basically is a longer softer bump stop / Rubber 'Spring' that will help with stability and better ride height when loaded or towing. This is a great alternative to air bags and does not require any maintenance after installation.
Thanks to Timbren for sending me this kit.
From the Timbren Website:
"Is your truck sagging under load?
This can interfere with its overall performance. In other words, if your vehicle doesn’t sit level, there are a number of problems you will encounter:
Proper front end steering alignment is thrown off balance, causing the vehicle to have delayed steering response. The ride will feel unsafe and out of control.
The braking distance is extended due to significantly less weight on the front tires. Braking distance is increased because the front of the vehicle is responsible for up to 70% of the vehicle’s stopping ability.
The position of the vehicle’s front end causes its headlights to point upward. This creates a nighttime road hazard by blinding oncoming traffic.
Due to the misalignment of the steering, tire wear is increased and there is potential for premature tire wear failure.
The misalignment causes an uneven tire footprint, which can decrease your fuel mileage. This is due to the uneven load and vehicle riding unleveled.
Here are some of the benefits you will enjoy after you’ve installed an SES kit on to your rear suspension:
Increased Stability The progressive spring rate not only keeps the vehicle level - side to side and front to back.
Reduced roll and sway Less body roll and back-end sway means better handling when turning corners.
Cushioned road shocks The rubber springs smooth out rough roads, improving ride quality.
Easy installation With the proper tools, almost anyone can install a Timbren SES kit
Improved steering When the vehicle is level, the front tires maintain a better grip on the road.
Maintenance free Hollow rubber springs do not require any special ongoing care or upkeep.
Two best warranties Every Timbren SES kit comes with a Lifetime Warranty and a Customer Satisfaction Guarantee."
Tools needed:
12mm socket and ratchet and/or wrench
17mm sockets and extensions and ratchets or impacts
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
Song used in the video:
'Take Me Down to the Fashion Show' by NoMBe
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases.
Any other links are also affiliate links whenever possible.
This means that I earn commissions if you buy something from them.
I really appreciate your support.
I did the upgrade on our 2016 Sequoia Platinum, which had airbags. I also changed the shocks to Bilstein 5100. And towing a camper is a day and night difference. Timbern is the way to avoid sway and sag and gain control of your truck. Thanks, great install instructions 👍
Thanks for this video! This is what I’m going to put on my 22 1794 Edition. Great job.
I literally just installed these on my '19 Tundra. Easiest install ever.
Easy install.
Any idea what your tongue weight was with your boat? I just picked up a 2024 Tundra Limted hybrid and plan to pull a camper weighing 7500lbs and tongue weight of 1000lbs so I know I'm going to get some sag. I see they make two different kits, one at 4800 and another at 6000 lbs, which did you install? I added summo springs on my 150 and was looking for those for the Tundra but they do not make, that is how I stumbled upon these. I see from the question below you did the RC lift kit. I'm installing the M1 Shocks tomorrow to do my lift. Ordered a lot from RC and really like those guys.
I bought the Timbren SES for my 2002 Toyota Sequoia. Product was shipped from Timbren in Ontario, Canada to California via UPS ground. Not the fault of Timbren, but the shipping took nearly two weeks.
Upon receipt of the product, I found that the bolt supplied to attach the rubber to the bracket would not fit through the supplied washer that Timbren ‘pre-loads’ in the rubber. I called Timbren and they confirmed that the wrong washer was supplied. Duh. Bad engineering/parts assembly. I ended up going to the local hardware store and bought 4 of the proper washers. I asked Timbren for a partial refund for the parts $2USD and for my trouble. They declined my request for a partial refund and are shipping me 2 washers from Canada. Short story, if I didn’t supply my own washers, I’d still be waiting for correct parts before I’d be able to install these $309 overgrown pencil erasers. Not impressed.
Wonder will it work with a tundra lifted 3.5 inches
Do you offroad that truck? Do you know if you lose any articulation due to the size of those bump stops?
Not really doing any serious off roading, but it doesn’t seem to make a noticeable difference in the way it rides or goes over a bump or dip in the road. I am sure it would make a difference in the total flex or articulation if you’re going over some major obstacles though.
Thx for watching!
-Dan
What leveling kit do you have? What size of tires?
Can you give a video on everything upgraded
I went with the Rough Country 1.75" kit. Here is a link: amzn.to/3qcCwOj
Sorry, I didn't film the install, but it was pretty easy.
For the Tires I am running the 285/60/20 BFGoodrich KO2 tires on the stock 20” wheels. (No issues or tire rub at all) The only other upgrade I have done is the MillerCat Cat Shield. Here's a video on that: ruclips.net/video/dRDmdEglUvs/видео.html
How is the ride with the rough country spacer lift?
It’s fine, really didn’t notice a difference at all.
How heavy is your boat?
It's about 8000 lbs
Do you know what your tongue weight is? Wondering if I should get an air bag system instead, my rv has a dry weight of 6,506
@@guillermojuarez2830 sorry, I don’t know the tongue weight, but these Timbren springs worked great for us.
1:40… no torque spec, so just hit it with the impact just to be sure. LOL