Volvo tailgate lift support strut shock Replacement on XC70 V70 and adjustment.
HTML-код
- Опубликовано: 7 авг 2024
- If your P3 Volvo tailgate drops down or does not stay up, you need to replace your gas strut shocks of the tailgate.
Also replacing the four tailgate buffers and adjusting the tailgate.
Please use your VIN to order parts correctly.
Tailgate gas strit X2: Volvo - 31217640
Lower buffer stops: Volvo - 30762861
Upper adjustable buffer stops: Volvo - 31371523
Cheaper version is available on EBay and will work like oem without the spring.
www.ebay.com/itm/352605718350...
Please use your VIN to correctly order parts!!!!
Glitch: Glitch by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...) Artist: audionautix.com/ 
Авто/Мото
My wife's XC70 had the strut problem and I said to myself, " I bet volvosweden has a RUclips on this." You are the best!
Thx!!
Awesome video- straight to the point, no waffle and all the important bits covered, thank you 👌
@VolvoSweden- Always love watching your videos and learning from them. This is another repair I wouldn't have been able to do without your detailed installation video. Thanks for taking the time to make these videos and help us all.
Great video! Thank you very much! The dealer wanted to charge me over $500. I bought the parts online (using VIN as suggested) and saved me hundreds.
I replaced both cylinders. For those considering replacing their struts, I used a standard screwdriver to release the catches on my 2015 XC70 T6. It worked fine, but I'm sure not as efficient as the nice, custom tool in the video. You just have to release it by feel. The right side was more difficult to release the catch for removal just because the cylinder is larger in diameter and getting the screw driver at the right angle to undo the catch took some trial and error. The left side was easier to remove, but a little harder to install. Once I secured the front of the left cylinder, I found the cylinder needed to be compressed a little in order to fit the piston end of the cylinder onto the boss. To do this, I used the handle end of a medium-sized adjustable wrench. The hole in the handle did a good job of containing the ball end of the cylinder while I levered the wrench handle against the opening in the frame to compress the cylinder and slide it onto the boss. Then just moving the catch to lock it on.
Hey Steven, I just did this on my 2015 xc70 too. To my surprise the left shock was much skinnier than the right one. Also, the left side has a seemingly unreplaceable electric actuator. Have you attempted to replace that too?
Thanks so much for this video! Just replaced two struts on my 2013 XC70, and it took about 90 minutes following this guidance. Getting the clips off the front ends of the struts is a bit difficult; I used a small flathead screwdriver and did it mostly by feel. One important note: If you do NOT have a powered liftgate, both struts are the same (I used Stabilus parts, which are identical to the Volvo struts I removed). There are a lot of people commenting about having different struts on the left and right - I assume that's because they have a powered liftgate.
Depending on your VIN you might have two different struts so it is important to check.
Thank you so much for this video! I did this tonight on my wife's 2008 V70 and everything went perfectly. I had put off doing this for a long time because I thought it was going to be a real pain but it was actually quite simple following your directions. Cheers!
Excellent! Thank you!
It took me 35 minutes after watching this video. My friendly neighborhood Volvo Dealer wanted to charge me 5 hours labor to do it (plus parts, tax, and "environmental fees").
That's why they're called "stealerships"... 😉
Thank you for very informative and comprehensive instructions on how to do this!
I just did both struts on my XC60 2012 T6 using some info from your videos that was very helpful. Mine are a lot easier to get to and replace. It has fixed the same issue you had - but they don't open the tailgate as far. (A few inches shorter) I suspect I need a POT code update as using newer lifters - but dreading the dealer visit so living with it. Thanks for the great videos.
Thank you for this video. I needed to replace my 2016 XC70 tailgate struts and I am sure I couldn't have done it without your help! Your video saved me from paying the dealership $650.00.😎
Good job! That’s the whole point to help people!
Thank you so much for all the time and effort you put into making this video. It's saved me hours of headache and following along made it very easy to install with success
Perfect instructions.....I have a 2010 XC70 and it worked great...it turned out that only my right strut was expired....so, after I fixed that one, I did not want to push my luck....and, everything re-assembled perfectly. That is a rare occurrence for me. LOL Thanks again for doing this!
Thanks! I was able to replace these struts in about an hour with no issues. Great video!
I always want the solution for the tailgate not opening sometimes. I just lacked words to describe it. Now I know. Thank you a bunch
Excellent video. I replaced booth Gas strut shocks today. Without this video/information I had not manager to replace them. My Volvo xc70 With 360 000 km on the odometer needed this replacement. Many Thanks.
Great video! My rear cargo interior light just went out and your video helped me to replace it! Thanks!
Good video. Thank you. Just replaced mine two struts. Those catches are a pain to remove. Ended up using a short screwdriver to pushing them off.
in Germay you can‘t find such a good Mechanik- Man like you...!!!
Excellent Video!
Very informative and you cover all the steps to do closely. I have a 2009 XC T6 and the power tailgate is starting to slowly come down after opening. Initially only when the car was at an angle, but now sometimes parked level. It will be in the Spring as Winter is approaching. Only genuine Volvo parts too! Thanks so much for the help, I will be following this video closely when I have to do it too! I have used your videos to repair other issues on my car and all have been easy and informative to follow, thanks again 👍
Thanks for the clear instruction. The tailgate of my V70 landed on my head afew times during the last months, so I decided to replace the struts. With the help of your informative video-instruction it went well.
Dat klinkt goed, ik moet hetzelfde gaan doen met mijn V70. Meestal gaat die klep goed open, maar ik heb al een paar keer flink mijn kop gestoten toen 'ie wat lager kwam opeens. Van welk jaar is die van jou? Ik heb een iets nieuwer model als in de video en vraag me af of de installatie een beetje hetzelfde is. :)
Kijk in VIDA voor de exacte typenummers.
@@Saaihead MIjn V70 is van 2014. Helaas kreeg ik het laatste jaar de klep weer met regelmaat op mn kop, moet dus de veren opnieuw vervangen. Zit garantie op volgens de fabrikant.
Thanks for the tip of the tailgate bumpers. I replaced all 4 and the gate is working better. I also had Volvo do a software update which they said may improve the tailgate function.
Thank you for this. Great help and even though it took a lot of fighting to get the struts into the knobs, it wasn’t too bad of a project. It’s great to have the lift gate back to new!
If anyone is doing this for a 2012 XC70 you need the following two gas strut parts. Right side: 31217640. Left side: 31690441
@@ChrisBaccus I'm trying to figure out if my 2010 has one or two struts. I think my wagon is identical to the one in this video, but he only replaced the one side? Confused me a little bit.. Might go pull down the headliner to double check
Thanks to this great video I managed to change the gas struts effortlessly, all work was done in an hour. I didn't use original Volvo struts but bought Stabilus 437135 which are exactly the same (Stabilus is OEM Volvo supplier) but cheaper.
When you buy Febi Bilstein 36209, which is cheaper, you get a Stabilus product.
Just replaced mine on our 2012 XC70. Thank you so much for the great video, it made super easy!!!!
Fantastic video as always and really useful as my tailgate has this same issue when opening!
Very helpful. Ordered the new part and took me about 1.5 hours to remove the old ones and get the new ones installed. Hard to see what you're doing fm the back but was able to fit a light inside next to the window, that way I could see were the catch clip has a flat notch to fit a thin flat screw driver to pop the catch. After that it was pretty straight forward.
Yuri...Been watching your videos for awhile now. I just did this repair tonight and it was so easy. Thank you for your videos!
Thx so much.
Thank you. The dealer wanted $376 for this job, cost me $140 for the parts. It took an hour, but very few surprises. To get the 2nd side of the strut on, I need to push up the tailgate to the exact height and crowbar it onto the ball. Nothing too difficult, but would be easier with a helper!
Excellent video! Thanks so much for the directions on how to replace these shocks on our 2008 V70. I was able to get it all done and back together and saved a bunch of money by doing it myself. Your rock! Tack så mycket!
+Scott Aspelin Thx!!!
Thanks so much for making this video!! I made one too after following your instructions!! 💖
Great video which certainly helped me change my struts very easily!
Thank you, I just bought an identical Volvo with the identical issue. Your video was extremely helpful!
UPDATE: My XC70, a 2013, used one of the large supports with the spring on the right, on the left it had a conventional gas cylinder. I was able to easily replace the left hand one without pulling the headliner support up near the rear seat. I did pull it to do the one on the right side. It's great not to have the hatch hitting me in the head any longer.
Nice job, as usual.
Thanks for share it with us.
When i get my 08+ XC70 like yours... Am all set.... :) Good vids as always
did u get it? :D
Don't know what we'd do without you Juri .... and Evgeny of course 🙂
Allways good your videos, just replaced the struds on my T6, .thnx!
man you are an awesome source of information. Thank you!
Thank you so much for this your time and effort has greatly improved my ride and my life. I have a 2008 Volvo XC 70 Japanese import V6. I just want to add. I used a plasterboard ceiling prop to hold up the tailgate, Place it in the middle and make sure it pushes the lid open as far as it goes. I had no resistance removing the two gas springs as when the tailgate is forced to max they just pop off and on with ease. (obviously loosening the spring loaded clips) Secondly I purchased the following BILSTEIN gas struts @t Dont purchase them from Amazon give an independent business your trade. These are half the price of Volvos, Just as good and you can trust them as Febi bilstein make very good gear. My car use to squeak like old floor boards when on anything other than perfect roads. Now its squeak free. Now when i open and close the boot its ghostly silent. Part number 36209 (This could be just UK or Europe though). They say Right side but that a pointless description as you just role them 180 degrees and they fit. So just purchase too of the same.
Thank you for a very good video!
Very clear and complete.
An excellent video. Very helpful. Thank you for making such an easy to understand video
Thank you very much this video!!! I've just replacement both struts of my Volvo V70 without any problem. ❤
Yuri spasiba, you got the best mechanics to help Y...... !
Great vid! I bought myself a 2011 V70 D5, I already replaced the gasspring in de trunk itself that holds the wooden cover floor. I think that I will replace the tailgate springs as well. Thnx man!
Nice job man...very good explaining!! Top video
Thank you so much. I also need to replace gas springs of the tailgate.
I replaced my 2015 xc70 tailgate struts with OEM Stabilus struts (Stabilus makes Volvo struts without the Volvo branding for 30% less cost). The left strut, while same part number as the Volvo oem part number, was tough to insert due to the strut being a little bit longer even with the hatch fully extended open. To get it to fit, I had to clip in the front of the strut first, then use a screwdriver between roof frame and head of strut to slightly compress the strut. Once compressed, it quickly slipped into place. Great instructional video, thanks!
Awesome video I had to add a couple of washers to the lower passenger side bump stop. Works perfectly on my 2008 XC70. Thanks, "New Subscriber"
Excellent! Now do a video for installing/replacing the driver side door lock/cable on a 2008 XC70. Appreciate your guidance.
Thanks! Excellent video as always
Hello Juri, thanks for sharing this topic. Next time you experience a failing bump stop you first try placing some washers under the bump stops. This way you can solve the height which is needed to pop-out the tailgate.
I know Im asking randomly but does any of you know of a method to get back into an instagram account?
I stupidly forgot the login password. I would love any help you can offer me
@Joshua Owen instablaster =)
@Clyde Luca Thanks so much for your reply. I found the site through google and Im waiting for the hacking stuff now.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Clyde Luca It did the trick and I actually got access to my account again. I'm so happy!
Thanks so much, you saved my ass :D
@Joshua Owen Glad I could help :)
These cars are fantastic.
Dear @volvosweden. My profound thanks for this video. I just did the replacement and it worked perfectly as you described in the video. My garage in Belgium tried to convince me to replace the hydraulics (500 Euro + the cost of work). Now it was just 92,05 for the original part from www.VolvoZone.eu (they checked against my VIN number to send me the correct part). Total cost was 65.05 for the part, 5 handling cost and 22 shipment cost. Tusen tack för en suveränt bra video! Mvh/Kenneth
This is timely, I need to do this and have dreaded it...
I enjoy the great instructions
Great video as usual.
Great DIY video. Thanks!
Thanks, just replaced them. Didn’t needed the special tool, a normal flathead screwdriver dit the trick as well.
please can you visit germany an reparier my v70... you are the best car mechanic wich y saw. ..!!!
Thank you so much...I hope I can do this successfully...the Dealer wants $$$$$$$ to do this for me.
you are the best !!!! thanks !!!
Excellent video!!
Thanks! Super helpful
Very informative snd helpful, thanks
So precise, so helpful. Thank's.
nice work!!
Nice video! Thank you!
Video for replacing the struts very clear and helpful. What tool can you use to remove the catches?
very educative. Thank you
nicely done great help, thx !
What a Legend!!! Thanks
Many thanks! Just replaced them!
Perfect video, thanks a lot
great video guys
Note that when you have a XC70/V70 whith an electric opening door, you need two different struts. The left one with a spring around it and the left one without. At the left side a strut with spring wouldn’t even fit, because the connections are not in line but twisted a quarter. At the right side they are in line.
I have already replaced the pieces that you have recommended, but the tailgate with the remote control does not open.
He makes an attempt, tries to open up but after a second he closes again.
My feeling is that in the opening phase, pushes more towards the left side and the lock hangs during the first shot instead of opening completely.
If you help the tailgate with your hands, by taking it on the license plate holder, then the tailgate opens correctly with the remote control
U r king. Like always. Love from sweden
+Viking SWE Thx!!
Fab vid;well done .
It would be great to see a video when youre upgrading/retrofiting xenon and LED to exterior lights and mybe a LED light bar.
Thank you!
Thank you for the video, when you gonna replace the V belt for the same vehicle please?
Thank you.
That you very much for your tips!!
Great job, it worked!
Hi, many thanks for a great video, I have xc70 2015 cross road model. The car does not have the tailgate lift installed. The tailgate does not have the button for reclosing. My question to you is do you know if the electrical opening&closing can be installed? Do I need a complete new tailgate or can I buy the parts and rebuild the existing one? The car key has the botton of opening the tailgate and also there is button by the steering wheel for the same purpose but nothing happens when pressing them. I guess the lock is purely mechanical.. best regards, Sid
Great video! how much time do i have to plan for replacing the dampers? where do you get this special tool?
I had the same hot weather issue in the midwest USA. Was delivering Pizzas out of the back.
I have XC 70 D5 AWD 2011y.
Gas cylinder on left and right side are not indentical. On a right side is cylinder like on your video, with springs, but on a left side is cylinder without a spring.
@volvosweden
I enjoy watching and appreciate your videos, they have helped me numerous times. I had a quick question about the gas support struts for the tailgate. When I woke up the parts by my VIN number it only shows the left support strut. Just wondering if their interchangeable or if you ordered a right and lost. Thank you again!
Excellent instruction. How different is this on my '04 XC70? Neither my '04 nor '12 have the power lift gate. Thanks.
Great video, thank you. I'm new to Volvo, so is it the same on the V70 as the XC please?
I would like you to confirm that the gas strut on the left hand side is different as it has an electric actuator which initiates the process of opening and closing.
Did you get it replaced? Mine looks like yours, left side is different
@@jbsff I haven’t replaced it. I’m used to open and close the hatch by hand. But sometimes the auto-functions works as it should. Nevertheless I’m still waiting for a suitable answer to cure it.
thank you!
Спасибо большое друзья! Я точно так и сделал всё как по маслу.
Is it possible to show the replacement of the actuator on the left side, because that item initiates the opening and closing of the POT. Thx.
I recommend starting the repair by adjusting or replacing the rubber bumpers
hi I replaced the pistons with 2 stabilus as you advised.
Now the hatch no longer falls on my head but remains open, finally.
However, the automatic opening does not work correctly.
Using the key, the tailgate tries to open but after a click closes because on the right side it does not seem to open sufficiently to open the total unlock.
Do you have any advice for me?
IF I help the tailgate during opening, on the right side, then it opens completely by itself, as it did originally.
I want to clarify that a lower rubber is broken, so in closing there is no limit switch.
but the profile of the tailgate is in line with the headlights, jackets rests on 3 rubber pads.
Good job!
In my case struts without springs did not work. They would not slow down and tailgate would open too rapid. Had to change them to some option with springs (stabilus?) and works like a charm now.
I must have lost some clips holding the upper trim though. The one with light. Does anyone here know what is the part number?
Can the guard be lowered with the load cover in place ?
Thank you for your clear instructions.
The link to ebay is broken--is there an updated link to the item without springs that saves money?
Can u tell me please how you can close the hatchback with the car key controller?
Do you know how to open the unlocked tailgate from inside? My 2008 xc70 has the tailgate stuck and won’t unlock. Can’t believe it can’t be opened manually from inside