Would living in texas play a part in the curing process? If it is 3 hours to dry a layer indoors then it would be 1 hour outside in 100 degree weather right? Would you suggest doing the first few coats inside first and then moving it outside?
Wow, you are really good at doing these. It's just so exciting for me to watch you do this. I would like to make cactus molds, would that be possible? Please advise Thank you
can we use polyester resin for casting with this mold? and before casting do you use PVA for mold release? or can we use ( mixing of castol oil with rubbing alcohol?) thanks.
What do you do with your dried clay originals? Are they damaged sometimes, pulling the mold off? I feel like i'd need to bisque fire them before I could mold them to avoid that =/ But if it's no problem then maybe I could get over that fear and actually make some things XD
I really enjoyed the video thank you I learned a lot. I have tried to sculpture just small stuff like a little cat out of air dry clay. I just don’t have much luck is there an easier material or substance to sculpture out of
Don't worry about latex build up on your brush. Steep your brush over night in white spirit and it will eat even hardened latex of but make sure you give your brush a realy good wash in dish soap water to get all that spirit of before using that brush again.
Never use direct heat to speed dry your mould making as it can de laminate each layer you paint on. Patients is the key. Let each coat semi dry before adding the next coat.
So that irritating people like you can make irritating comments about the irritating videos that keeps you irritated. Your welcome. Regards. Mr Irritator.
You people are rude. Who cares that she has that music going . Everyone likes different music, just like some might this tours is annoying. NO RESPECT NOW DAYS ITS REDICULOUS
Was looking for a tutorial on making a mold for cement project Watched about 30 of them YOU WERE THE BEST!!!! Thank you so much!!!
GREAT EXPLANATION ! THANKS FOR SHARING !
This is my first time watching your video. I really enjoyed it. You did a beautiful job and explained it very well too. Good video to learn folks. 💕
Right on …. Thank you so much for teaching us out here ❤️
Excellent video. So informative!!
thanks :)
Thanks so much sharing !! Great video
Great video, best one I’ve seen on RUclips
Would living in texas play a part in the curing process? If it is 3 hours to dry a layer indoors then it would be 1 hour outside in 100 degree weather right? Would you suggest doing the first few coats inside first and then moving it outside?
Great video!
Excellent. Thank You. I can do this now
Is the latex material you use special? I also made a mold with latex, but it didn't work. The latex mold I made turned out to be very thin.
Aula espetacular! Muito grata!
Wow, you are really good at doing these. It's just so exciting for me to watch you do this.
I would like to make cactus molds, would that be possible?
Please advise
Thank you
Hi, How do you store the brushes in between coats?
can we use polyester resin for casting with this mold?
and before casting do you use PVA for mold release? or can we use ( mixing of castol oil with rubbing alcohol?)
thanks.
What do you do with your dried clay originals? Are they damaged sometimes, pulling the mold off? I feel like i'd need to bisque fire them before I could mold them to avoid that =/ But if it's no problem then maybe I could get over that fear and actually make some things XD
I really enjoyed the video thank you I learned a lot. I have tried to sculpture just small stuff like a little cat out of air dry clay. I just don’t have much luck is there an easier material or substance to sculpture out of
Don't worry about latex build up on your brush. Steep your brush over night in white spirit and it will eat even hardened latex of but make sure you give your brush a realy good wash in dish soap water to get all that spirit of before using that brush again.
do you use some sort of a release between the resin and latex ?
Can you just dip the statue into the latex?
Where can I purchase Laguna Latex?
Never use direct heat to speed dry your mould making as it can de laminate each layer you paint on. Patients is the key. Let each coat semi dry before adding the next coat.
Where to buy?
Can i put latex on a concrete statue to make a mold?
Does she ever reply to anybody
Yes concrete is a good source of new molds
Thank you.
How long do you usually wait for the PVA to dry?
Nesesito el latex donde lo puedo comprar
Thanks
🙏
Why do you think that you need the irritating background music? Didn't finish watching. Too bad because it was probably a good v
So that irritating people like you can make irritating comments about the irritating videos that keeps you irritated. Your welcome. Regards. Mr Irritator.
Yup.... the music just played and played and played and played and played.......
It’s not even bad
You people are rude. Who cares that she has that music going . Everyone likes different music, just like some might this tours is annoying. NO RESPECT NOW DAYS ITS REDICULOUS
Get rid of the music!