Your channel should be way bigger than it is. YT just hasn’t caught up to you yet, but it’s coming. I learn something every time I watch. I hope that in 2022, you can go full time in your shop. Cheers!
Hey Travis, I have to say that I really enjoy your shows, Cannot wait until you get back on the 37 But congrats on the new baby What fun that is, I can say that cause I am old and it will not happen to be again I really did enjoy the grand kids cause you can send back home when you get tried, So take your time enjoy them while you can cause later you won’t for a while. Will watch when you come back
Cool. Nice work. Years ago I saw in a car magazine they filled in the huge round emblem in a 58 buick hood and peaked it. The hole was the same size as this. (Picture the front of a 58 buick hood)
Congratulations on the new shop helper! That's the best looking filled and peaked '32 Grill I've seen! Are they seriously going for $2500 these days?...sounds like I need to cash in haha. I'm looking forward to the 36 roadster project!
Thanks for rubbing it in about having a pullmax....takes a pair to cut into an original deuce shell...beautiful job as always...might wanna consider doing this for a living..now your going to have an excuse to get another hotrod...for little Travis....good job
Hi from down under Australia. You sir, are one very talented guy. I look forward to all of your videos and I marvel at your results. Would it be possible at the end of your videos to let us know how long it actually took to finish the job you've just completed? Something like.....".......and this took me around five and a half hours to get done". Congratulations on the newest member of your family. Ray.
Great job and explaining as you go. You need to take a break from videos for a few weeks and enjoy time with your family. We wish your wife and new baby the very best, God Bless!
Morning Travis, looks so like you & I have the same problem......room!! when I'm working on out in the garage, my driveway becomes my outdoor shop.Looks like you have a Harbor Freight English Wheel, are you happy with it!!..by the way, nice work!! be safe!! God Bless!!
firstly, a big congratulations to you and the clan! secondly, i'm really looking forward to the coming projects and glad you've got cool jobs coming in. good stuff all around!
1st. I should say, “congratulation”! 👍🍼🍀🤩 2nd. Back in the day, I sure could have put your skills to good use.⚒😁 I used to think that I was a body man but now I realize “I was just a “mud-dobber”!! 🤭😁😉🤣
Rad channel; I just stumbled upon ya! Congrats on the impending little one. Feel free to wander down to my channel if you ever have a moment and have a peek! My latest project is a 1970 Hahn-Eclipse riding mower that I want to turn into a go-cart for my girls. It has a '66 Mercury steering wheel, haha - cheers from Alberta, Canada!
I’ve said it once I’ll say it again watching you do metal work is like watching a master artist.
Your channel should be way bigger than it is. YT just hasn’t caught up to you yet, but it’s coming. I learn something every time I watch. I hope that in 2022, you can go full time in your shop. Cheers!
Thank you! I hope they catch up soon!!
I never saw that technique used before for creating a subtle ridge line. It’s a great trick.
Hey congratulations are in order, dad the second time around!
keep up the nice, clean, detailed work! Thanks for sharing and congratulations again!
Thank you! Can’t wait to build another hot rod!
Very nice job. Your explanations and drawing were fine. Thank you for taking the time out to explain.
Wow never knew that. Thanks
Well done! My old 32 Ford had the original style grill which I preferred. All the best to your family.
Hey Travis, I have to say that I really enjoy your shows, Cannot wait until you get back on the 37 But congrats on the new baby What fun that is, I can say that cause I am old and it will not happen to be again I really did enjoy the grand kids cause you can send back home when you get tried, So take your time enjoy them while you can cause later you won’t for a while. Will watch when you come back
I’m not leaving just figured I’d tell you guys invade the videos sucked haha 😂
Thats pretty neat tech how to make a peak, never thought that way to do it and congrats on the new familymember!
Thank you!
Congrats on new little one hope mama and new little one is doing all right before and after the stork comes.
Thank you ! You’ll know how it went, I’ll keep everyone updated
Congratulations on the new baby boy
Thanks brother!
Beautiful job on the grill shell! Congratulations on the new little one!
Thanks John!
Great job. Nice carpet. Only issue with carpet is it catches everything. Little shards of metal. Keep it clean. Enjoy
Always making the hard jobs look easy.
Thanks brother! Love what I do!
First class work!
Neat! Wow thanks
Mighty fine 👍
Excellent job and Congratulations To you and your wife on your new Baby
Thanks John!
Great work. Congrats on number 2
Thank youb
nice job 👍👍👍
Cool. Nice work. Years ago I saw in a car magazine they filled in the huge round emblem in a 58 buick hood and peaked it. The hole was the same size as this. (Picture the front of a 58 buick hood)
That sure peaked my interest 👍😎👍
i see what you did there!
Nice Work
Congratulations on the new shop helper! That's the best looking filled and peaked '32 Grill I've seen! Are they seriously going for $2500 these days?...sounds like I need to cash in haha. I'm looking forward to the 36 roadster project!
Oh you’re just saying that! Just send that grill to me!
Awesome job 👌 Congrats on another future hot rodder helper👍
Cool vid, congrats.
Thanks for rubbing it in about having a pullmax....takes a pair to cut into an original deuce shell...beautiful job as always...might wanna consider doing this for a living..now your going to have an excuse to get another hotrod...for little Travis....good job
Haha 😂 thank you! Yes it was nerve racking! I do need another hot rod! I love the excuse
Killer!!!!
Hi from down under Australia. You sir, are one very talented guy. I look forward to all of your videos and I marvel at your results. Would it be possible at the end of your videos to let us know how long it actually took to finish the job you've just completed? Something like.....".......and this took me around five and a half hours to get done". Congratulations on the newest member of your family. Ray.
Great job and explaining as you go. You need to take a break from videos for a few weeks and enjoy time with your family. We wish your wife and new baby the very best, God Bless!
I’ll have videos out like normal, they might not be good but I need to come out with something or RUclips will kill the channel…unfortunately
Luxo
Killer. I was just researching this the other day and couldn't find any good RUclips videos.
Morning Travis, looks so like you & I have the same problem......room!! when I'm working on out in the garage, my driveway becomes my outdoor shop.Looks like you have a Harbor Freight English Wheel, are you happy with it!!..by the way, nice work!! be safe!! God Bless!!
Thank you thank you!! Yes harbor freight wheel works well no real complaints
Congrats on the new baby. And did I hear a niner? LOL
Thanks brother and yes you heard correctly!
firstly, a big congratulations to you and the clan! secondly, i'm really looking forward to the coming projects and glad you've got cool jobs coming in. good stuff all around!
Thank you thank you! I’m excited for everything!
@@RACGARAGE are ya active on the hamb?
positive vibes, man!
@@Ecosse57 I try to be but I mostly just look. I’m usually too busy with all the other social media platforms 😂
@@RACGARAGE sh't is overwhelming.
Is that a #7 Greenfield t&d handle? …. And did we have a carpet upgrade? The old one was a classic, but square footage is key! Congrats on the baby!
I’m not sure but it is huge! New carpet but the old one is still here! Thank you!!
👍🏻
1st. I should say, “congratulation”! 👍🍼🍀🤩 2nd. Back in the day, I sure could have put your skills to good use.⚒😁 I used to think that I was a body man but now I realize “I was just a “mud-dobber”!! 🤭😁😉🤣
Thank you thank you!! I bet you were just fine!
Travis congrats on the new weeone. Also what make of tig do you own. 😊
His tig is an AHP.
Correct, thanks Dan!
what good was all this most people dont have a damp ha mm
It can be done with a hammer and dolly, I just needed it done faster.
Rad channel; I just stumbled upon ya! Congrats on the impending little one. Feel free to wander down to my channel if you ever have a moment and have a peek! My latest project is a 1970 Hahn-Eclipse riding mower that I want to turn into a go-cart for my girls. It has a '66 Mercury steering wheel, haha - cheers from Alberta, Canada!