How to repair Husqvarna Mower blade & belt self propelled all wheel drive L221AHK 21 IN HONDA AWD
HTML-код
- Опубликовано: 3 июн 2022
- How to repair Husqvarna Mower blade & belt self propelled all wheel drive L221AHK 21 IN HONDA XTX775 AWD - lawn mower
#Repair #HusqvarnaMower #raleighjones #L221AHK
Tools:
9/16 box wrench
clamp
14mm and 10mm socket
3 pound hammer
T27 star bit
Parts:
Genuine Husqvarna Belt.Drive.21Eff.Awd Part #: 580 36 46-09
Blade OREGON brand Part #: 195-067
FIRST-CLASS CUTTING WITH A HUSQVARNA LAWN MOWER
The new 21" 15-gauge steel high performance cutting deck from Husqvarna integrates the latest advancements in technology and development with traditional design, providing a hi-tunnel mower intended to meet the highest expectations in cutting performance. For some mowers, a large capacity bag might be a challenge, but when your mower is powered with Husqvarna's All-Wheel-Drive there's more than enough capability to carry a full load; through thick turf and other challenging terrains. Equipped with engineered tread and All-Wheel-Drive with the added benefit of improved unit balance, these new mowers are sure to please from the postage-stamp yard professional to the rural weekend warrior. Хобби
I'm a 76 years old Marine and take pride that, "I can fix stuff". Thanks to your video I was able to replace the belt (LC221A) and I now I can continue to get much needed exercise by mowing my own yard. Thank you.
Raleigh don't forget to pour gas over the spark plug it really cleans out the points.
Thanks for sharing information and advice 😊
watching here sir
thank you so much
Thanks!! Excellent Video!!
No problem my friend
I once replaced the belt on my dryer. I ripped all my nails off (real nails) lol and was bruised all up my arms from hugging the drum while trying to wrap the belt around. I'll never do that again lol
Nice 👌
I do believe you gave the wrong advice on where the tension cable goes, It goes in the middle of the belt not on the outside. See 8:17 in video when the plastic cover is removed. Just an observation. Thanks
I believe your right. If you put it on the outside, it WILL wear out the cable and/or the belt!
Worst it’s missing the cover over the belts and pulley’s
Although there is a brake handle on this machine, DISCONNECT THE SPARK PLUG. Did I mention to DISCONNECT THE SPARK PLUG?
❤️❤️❤️❤️
Love watching a mans forearm's while he's fixing things.....Sigh 😀
I'm surprised you were able to do this without removing the exit shoot and it was possible this way thanks it works obviously. Thanks
What's the model # of the mower, please?
Have you done this before?
No This was the first one I’ve ever owned.
Also, remember it’s the Internet, so I’m an expert at this as well
amateur, there is a set screw mechanism on the cable, you turn it 3 times out , and then your 4x4 works again when you switch it on, everything with the ratchet wrench is not okay, that's how you turn everything crazy. prefer to use ODM parts rather than imitation . and that cable should be between the belt and not outside the belt. if you do, do it well. with your sandblasting machine, ps. no wonder that blade is so worn out.😂🤣😂🤣😂🤣👊👍💪🏻
lol 😂
Your only an amateur if your calling someone else one. Tightining the “screw mechanism” does not always fix the self propel. If you worked on small engines for a living you would probably know that. Being kind cost nothing, but your comment could cost someone something.
@@gabbysnow4751 thank you
He has no clue