If its outa warranty, just disconnect and vent to the atmosphere . Plug the spot ware it hooks to your intake manifold. Screw the oil catch can. Im in a winter wonderland and catch cans dont work well here 7 months a yesr. Just do a direct atmosphere vent and done. Carbon deposit are 90% gone.
Very good video. Easy to understand. Two questions. I have the exact car. What size screw did you use to attach the bracket to the car? And what do I torque the manifold bolts to? Thank you in advance.
The screw I used is a 10 mm. I do not remember the thread gap however. If I were you I would take the original bolt that's there and match it with something that is slightly longer at your hardware store so that the bracket can mount to the frame; that's what I did. As for the intake manifold, the torque specs are the same for all bolts: 33 ft-lbs. or 44.5 Nm.
Here it is on Amazon. www.amazon.com/EVIL-ENERGY-Universal-Reservoir-Aluminum/dp/B081N392BN/ref=sr_1_1_sspa?crid=14U3YXFH9DTIA&keywords=evil%2Benergy%2Boil%2Bcatch%2Bcan&qid=1695089644&sprefix=evil%2Benergy%2Boil%2Caps%2C119&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
been using those catch cans for years, works best with stainless steel scrubbing pad inside
That's how I personally run mine.
Did you turn the engine to close the 4th valve?
If its outa warranty, just disconnect and vent to the atmosphere . Plug the spot ware it hooks to your intake manifold. Screw the oil catch can. Im in a winter wonderland and catch cans dont work well here 7 months a yesr. Just do a direct atmosphere vent and done. Carbon deposit are 90% gone.
Very good video. Easy to understand. Two questions. I have the exact car. What size screw did you use to attach the bracket to the car? And what do I torque the manifold bolts to? Thank you in advance.
The screw I used is a 10 mm. I do not remember the thread gap however. If I were you I would take the original bolt that's there and match it with something that is slightly longer at your hardware store so that the bracket can mount to the frame; that's what I did. As for the intake manifold, the torque specs are the same for all bolts: 33 ft-lbs. or 44.5 Nm.
Hey man, can you do a fuel injector replacement video?
If that day comes then sure.
Does this kit be installed on a 2019 Mazda sport cx3 ?
It's a universal catch can, but I will say that the location for the PCV is going to be the same on your CX-3.
Would this video work for a Mazda 6 as well?
You have a link to the oil catch can you used?
Here it is on Amazon.
www.amazon.com/EVIL-ENERGY-Universal-Reservoir-Aluminum/dp/B081N392BN/ref=sr_1_1_sspa?crid=14U3YXFH9DTIA&keywords=evil%2Benergy%2Boil%2Bcatch%2Bcan&qid=1695089644&sprefix=evil%2Benergy%2Boil%2Caps%2C119&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Can I put one in a jeep?
Yes