Видео

Great video

If its outa warranty, just disconnect and vent to the atmosphere . Plug the spot ware it hooks to your intake manifold. Screw the oil catch can. Im in a winter wonderland and catch cans dont work well here 7 months a yesr. Just do a direct atmosphere vent and done. Carbon deposit are 90% gone.

I made my resonator intake to the airbox to 60 mm ,then I inserted alloy piping with 62 mm silicone piping over the piping to hold it from slipping out ,then I added 60 to 80 mm silicone hosing to the alloy piping ,then i added a 80 mm alloy piping ,then I added a 80 to 100 silicone hose to the end to give a better intake to the airbox

did you also delete the resonator? and is that already what is sounds like with cats? or catless?

Try going LED, I reckon you won't be going back to halogens 😂

K&N oil is bad for the MAF sensor just use a dry paper air filter

It does look like your headlight needs polish. I can see it is a little fuzzy and this usually manifest much more at night because the fuzziness diffuse the light. If you clean the lens, it can concentrate and you should see a better and brighter light pattern.

Hi everyone! I forgot to include the torque specs for the bolts and nuts. Here is the info you need: For the two lower bolts: 90 Nm or 66 ft.lbs. For the three or two nuts on the engine: 100 Nm or 74 ft.lbs.

Great video

you did a good job, however that flex pipe will fall apart in about 3 to 6 months it is better to use exhaust pipe for all of it.

Where did you get the urethane inserts?

Anybody have the torque specs for the bolts?

Sound good to me

What year is your Mazda?

waste of time sounds terrible

What are the torque specs for the nuts and bolts? I have a 2013 skyactiv automatic Transmission and i am finding it hard to find torque specs. Thanks

For those wondering this also fits sky activ automatic transmission, the part number is: BFD1-39-060

Great analysis at the end. I'm considering the Progress 22 mm RSB for my stock '09 Accord coupe. Not looking to go on the track or anything, just looking for greater responsiveness, stability and a tighter feeling on these CO mountain roads! Do you think it might be a good fit?

Hey guys just letting you know that I fixed the chain skipping issue and upgraded the saddle! Here's a link to that video: ruclips.net/video/Po0pJD5ID2I/видео.html

Does this kit be installed on a 2019 Mazda sport cx3 ?

Hey man, can you do a fuel injector replacement video?

Nice tutorial bro

been using those catch cans for years, works best with stainless steel scrubbing pad inside

Hey man! Just about to buy a new to me used Mazda 3 2012 skyactive and found your videos, do you have any social media where to hit you up and talk a bit more about the mazda 3 skyactive specifically?

👍🏾

Did you turn the engine to close the 4th valve?

what about exhaust note did it make any difference?

Great video, keep it up!!

Would this video work for a Mazda 6 as well?

You got a really good deal, paid $470. For mine a couple of weeks ago it's November 25th and they didn't even lower the price for black Friday.

That's a really good idea to put tape on your bike to protect the frame, I'll be doing the same to my new axum.

I have the same bike just watched your other video and I can't believe you're still using that same saddle, it's terrible. I changed mine after the first week of riding mine. My chain drops every once and a while to but other than that this bike is still the best bike I've ever had.

I bought my axum last week and I love it I got a new seat just yesterday because as you said the one it comes with is very uncomfortable. I injoyed your trail video shots and I will be making my own videos of the trails that I will be riding on. Nothing to crazy because I'm a new rider and in my late 50s and like by body to stay in the unbroken but we'll worn state it's in😊.

Very good video. Easy to understand. Two questions. I have the exact car. What size screw did you use to attach the bracket to the car? And what do I torque the manifold bolts to? Thank you in advance.

I see schwinn really went all out on the tire size lol, 2.60 with barely any room left on that rear tire. Beefy tires are nice but personally atleast on the rear I'd probably size down to a 2.50 or 2.40 just so there's a bit more room so the seat tube isn't caked with mud. It was a great idea to add that frame protector film on the seat tube.

That saddle and the bars were the first things I replaced.

I have a Schwinn Axum 1-8 speed it’s dropper post ready mine is the blackish gray color with gold sparkles? Inside the paint absolutely love this bike. We have the same bike but mines a different color for the price of the bike. I think it’s a awesome value. Yes I agree the bike seat there’s not much comfort in it If you know what I mean, you should just go to Walmart and get a bicycle seat gel cover. And put that on you’re gonna be happy with it. The bike is very very fast. I love the big fat tires. It’s really good for a grip. Great video my friend.

Are there changes from earlier than 2023 year models of the Axum DP? Also are Schwinn bikes still available direct from Schwinn? I know they ship free. The web generally only says where retail stores carry this bike.

The derailleur is junk on the axum bike. Mine broke on day one after dropping the chain. Cost me another $200 to take it to a bike shop to be fixed

Sounds a whole lot better. I was wondering if I could do it without removing the front bumper. So excited to do this thank you!

You have a link to the oil catch can you used?

Can I put one in a jeep?

Can u take out front tyres out easily? I want to remove them n put inside car

That's a nice trail. Where is it?

It's a Mazda 3 bro, not a race car.

It needs a clutch........They put them on cheaper bikes why not this one.

I slice the box and use it to work on to save my knees and the paint....I replaced the pedals with Fooker pedals.

I CANNOT find the size M version anywhere. All I found was size L which is too big.

Great vid, let's get rowdy!!🔥

What size bike did you get?