LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display WIFI Bluetooth5.0 Wireless (clearer)
HTML-код
- Опубликовано: 1 дек 2022
- 1.The video introduces the details of T-Display-S3.
2.The demonstration uses Platform IO, arduino IDE, Micropython, and IDF to build the environment, you can choose one of the ways you like.
3.Factory firmware can use ESPtouch to configure the network.
*Github:
github.com/Xinyuan-LilyGO/T-D...
*How to buy:
Amazon store：
www.amazon.com/gp/product/B0B...
AliExpress store：
www.aliexpress.us/item/325680...
LILYGO website：
www.lilygo.cc/products/t-disp...
I recently bought this board, and in general it is a nice board. MCU is a bit faster and screen is more denser than the previous one.
i can't wait to get mine i ordered mine off eBay
oh yeah I just ordered mine today
could you PLEASE do that with a readable video?
ojo ojo nos juntamos y haver donde llegamos.................estoy muy solo
One of the previous versions, the T-Display RP2040 still doesn't have a USB VID/PID assigned to it. Would you be able to get that resolved? This is preventing circuitpython compatibility.
CircuitPython is not compatible with our TTGO series, Micropython is available
Can I install this with a Chromebook laptop
Just got my one in the mail today so thought i got lucky with the new upload but i think ive bricked it
its just boot looping now when i plug it in my pc i just hear devise connected and disconected sound...bruh this vid nuked my shit man
@@brazed420 please contact our customer service or email : sales@lilygo.cc
Do you have a windows pc
I hope it works for you I ordered me one to but it's a little different though it's the USB dongle
will it work with a Chromebook laptop
YAY
Hi there! I have this board and it works great when powered through USB, but how do we power this board WITHOUT using USB? The schematics suggest it should be possible, but mine won't boot when I try and power it from the 5v pin (or from the li-po connector on the back) which normally works on the TTGO T-Display and other ESP32 boards. Any suggestions/help would be great. Thank you.
Hello.Because of the low power consumption design of battery power supply, our engineers use it. GPIO15 and GPIO38 control screen backlight, you need to turn on GPIO15 and GPIO38 at the same time
@@LILYGO How do I do that? My board doesn't turn on when I want to use the lipo battery connector
@@LILYGO Thank you for your reply, as these GPIOs aren't easily exposed on the board I guess USB-C power is the only option for me :)
@@IlIREDIlI We will add these descriptions in the product details and github examples. Thanks
@@LILYGO Thank you. Also, with the help of Volos Projects here on RUclips I learned that I should add these 2 lines in setup():
pinMode(15, OUTPUT);
digitalWrite(15,1);
...I can confirm that the board works with power from battery or 5v rail. Thank you for your help ☺️
How do I reset the lilygo s3. I made a recording and there was a problem and I already tried to erase the flash with the Esp tool, but it keeps connecting and disconnecting until I indicate the port quickly, otherwise it disconnects again. After connected and indicated the files it records normally. But I disconnected from the power, it returns to the normal position when I connect to the power, connecting and disconnecting. Nothing appears on the screen at all.
How do I delete all data and leave it default to the factory? Thanks
Re-burn the factory firmware: github.com/Xinyuan-LilyGO/T-Display-S3/tree/main/firmware
I can't wait till mine but I have a Chromebook
But i have a Chromebook laptop
Is it now programmable over WiFi or Bluetooth without extra tinkering 🤔😳
You can use wifi and bluetooth, and it can be upgraded through OTA. But it cannot be programmed directly via wifi or bluetooth.
I have the lilygo dongle usb
Mine came without the firmware installed it seems. I can't get it to do anything. I just emailed sales.
Our sales email is:sales@lilygo.cc,
please don't hesitate to contact us,thanks
me too
I just ordered one
So do I just got to install the software on Arduino
I just got it but I got the USB one
I still don't know if I did it right
Can theses scan wifi in can they do bluejacking
I think I am having a hard time to
Hi, Do anyone know how to use a free spi and what pin can be used ?
PIN10, 11, 12, 13 can be used. please check here:github.com/Xinyuan-LilyGO/T-Display-S3/blob/main/image/T-DISPLAY-S3.jpg
the one I have Don't have pins
its just like that one but they are the same name
So, where can we find the code for the flip clock?
github.com/Xinyuan-LilyGO/T-Display-S3/tree/main/examples/factory
@@LILYGO Thank you.
I have the dongle
This ESP board is very nice. Arduino installation worked for me (TFT_eSPI library is working for display). I want to use micropython. Installation process of micropython also worked. However, there should be another video to use display with micropython. Micropython library of display should be explained. Could you PLEASE publish a video for micropyhton with display?
github.com/russhughes/st7789s3_mpy
can I use a Chromebook laptop to do this I just ordered me one similar like this
I just wanted to know will this work using a Chromebook laptop
I can't install ide Arduino, many erros!
What are the specific errors reported,please contact us via email: lily@lilygo.cc,thanks
@@LILYGO I got it, but now I can't print on the serial port, even setting it to 9600 baud, could help me!
@@LILYGO the toy lasted two days, now windows no longer recognizes the serial port :-(
Can i get a free board when cleaning your desktop? :D
Sure,please come
mina doesnt connect on the wifi
please check this new video：ruclips.net/video/bbcZ23tlHmA/видео.html
that's messed up
I can't wait to get mine I got to of them