Hello my friend. Can you Link to some page with actual projects for this Board? I would like to understand more about it and make a simple internet monitor for my home.
@@arsenyspin1726 i night be wrong! I am still waiting on mine to ship from banggood! Over a month now! I am thinking of ordering the Adafruit equivilant in the uk
This would be a good project for a 'fridge thermometer' a little light detector for when you open the fridge, a little thermocouple to measure the temperature, screen turns on when you open the fridge due to the light coming on, and shows the current temperature with a graph over the last 12/24 hours. Shows little yellow lines each time the door was opened (light sensor activated). Logs the temp in say 15 minute intervals.
I took your code and did a lot of spiffing upon it. Now, the time changes uniformly and the useless extra array of numbers is gone. Running at 22 fps when I started. Now 27. Interesting code in spots. The debounce is interesting. Not really a debounce but it does let the code keep running even with the button still pressed. Better than some demos I have seen.
I just purchased the board via your link so I hope you'll get your commission on that, I got it even cheaper than you because I'm a Banggood VIP member and I had some BGPay money from the commissions that I got from peoples purchases so I cheated a little bit.
Good afternoon cool board quite powerful I'm really looking forward to the Internet radio with a weather station and a clock :) thank you for your work
Please help!!! I love your channel and you are the one who got me into the ttgo boards. I have one that I accidentally ripped the screen off of do you know of any way to get a new one or use one of my other lcd screens? I am running the resistor calculator sketch on the board and ripped the ribbon cable trying to put it in a case. Any help from anyone would be greatly appreciated!!!!!! Thanks
☑ CORRECTION RE: DUAL CORE All of your "old" T-Display boards are also *dual* core my friend! ESP32 has been primarily dual core since launch. (Espressif later released cheaper single core platforms, distinguished by having a "2" in the name. Seriously. If the ESP32 has a "2" in the name, like "S2," then it has a *single* core. Because "TO HELL WITH COMMON SENSE!" said every marketing team, ever.)
Love your videos and tutorials! Is there a way to debug the lilygo s3 amoled? Compared to other esp32s3 devkits which have 2 usb interface (1 usb, 1 com/uart), these have only 1 usb interface. Thanks!
Hello! Have you attempted to use/mount SPIFFS file system on this board? Just curious, as I have had issues with both the S2 and S3 versions of ESP32 Adafruit boards...
Excellent video, you do really great work. That screen looks stellar. I got the code from github compiled and uploaded to the board (using arduino IDE) and nothing displays on the screen, so I tried a second board, same result. I put my WIFI ssid info in . My thoughts are that it wouldn't compile and upload if there were missing libs The screen is black, I'm doing something wrong but I can't figure it out. I'm open to any ideas :) My Bad, Had the wrong board selected. I know my glasses are around here somewhere :) It works great
Cool, your projects are well explained and fun to learn. I've been following along with my T-Display (first version). Looking forward to getting a T-D-S3 and following along. Your work and videos are beautiful. Hello from Canada:) yay Volos yay TTGO
My friend I am bit confused about how can you read an analog signal from pin 44, while it is not an ADC input (according to the pinout diagram in your video)?
The older ESP32 chip is also dual core, though there are single core versions of it but your TTGO board there is the more common dual core! The main differences between the ESP32 and ESP32-S3 are the S3 has slightly less RAM (512Kb vs ESP32's 520Kb), more GPIO than the ESP32, BT5 (LE) implementation, better low power modes, plus an AI acceleration support from vector instructions whatever that does! lol
Great video for people who already know what it is. Personally I found it useless in telling me what this thing actually IS, even though it looks really interesting. I'll have to find someone else's video to discuss it's application. I gave up on this one after 6 minutes.
@@sergiismyrnov Yes, I have just seen it at Banggood, today. The reason might be that the next version T-Display S3 amoled is out and it costs roughly 30€
1st time to your channel and this is a neat board so I'm very much looking forward to seeing more projects using it thank you for the excellent introduction
Which ACTUAL chip is on the board? The variants listed in Espressif's datasheet are: ESP32-S3, ESP32-S3FN8, ESP32-S3R2, ESP32-S3R8, ESP32-S3R8V, and ESP32-S3FH4R2.
Hi I enjoyed watching your video. I looked at your code and you seem to be using a lot of magic constants. This puts the burden of understanding what those magic constants represent on anyone who is reading the code including future you. Declaring what those numbers mean can greatly improve legibility of the code for both inexperienced and experienced coders. Doing so should have no effect on the size of the compiled code. Thanks for posting the vid.
I get the following error. Would you be able to help me. cp: cannot stat '/home/pi/.arduino15/packages/esp32/hardware/esp32/2.0.5/tools/partitions/default.csv': No such file or directory exit status 1 Error compiling for board ESP32S3 Dev Module
I stumbled upon a few of your videos yesterday and it inspired me to get a few displays. one of them was delivered this morning so I'm excited to try it out.
I'm going to have to pick one of these up. I've been wanting to start learning Arduino type programming. And I already have a little project in mind for this little display, Honestly nothing innovative. I just want a tiny clock lol.
Hi Volos, great video as usual. Thank you for your work! Have you tried to power this board without using USB? The schematics suggest it should be possible, but mine won't boot when I power it from the 5v pin (or from the li-po connector on the back). Any ideas would be great. Thanks again for the great videos.
@@VolosProjects Thank you sir! These 2 lines in setup(): pinMode(15, OUTPUT); digitalWrite(15,1); ...were exactly what I needed, can confirm that they work for power from battery or 5v rail. Perfect! 😀
They skimped out on 2 additional mounting points to create a secure attachment for a few cents of saving money during the manufacturing. It's a nice display but I would want 4 screw holes.
Hi I've tried several times to load this programme but have encountered several issue when trying to verify the code. the first one is "exit status 1 suggest explicit braces to avoid ambiguous 'else' [-Werror=dangling-else]" any help would be appreciated.
Video was posted Aug 25. Now, Sept 23, the banggood link leads to: "LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution *This product has discontinued* ." 😪
In Banggood it says: This product has been discontinued. We have recommended the following items for you. I Ordered one when first saw this video, waited and waited, eventually, I was refunded as they said it is out of stock. I there an alternative? BTW, still can find it in AliExpress
Subscribed and liked! I just bought two of these thanks to seeing them on your video. I have been impressed by all the Lilygo products I've seen so far and this one also looks excellent.
6:44 , i think esp32s3 which used in new ttgo display working exactly the same with the old esp32 but in more powerfull way, where both of them have 2 cores and also both of them support ble and bluetooth classic, i think the main differences of the esp32 s3 is that it also come usb to serial hid without removing the second core and the bluetooth connectivity, CMIIW
For my son I bought a ttgo t-galary whereas I can’t find any Pinout documents, examples or other Google results. He has now a present which is useless as the lilygo GitHub only has a set of binaries for his device. Who can help in obtaining the pinout? We only figured out the pins for the buttons and microphone. Who knows which screen type and which pins we should use?
Hi, I made a CO2 air quality monitor, which uses the graph from this video. May I write an article of my work into codeproject web site. I will mention you in the article and put a link.
I need to get my board back to factory condition. I am not able to get ESPTOUCH to connect to the board. No sketches will run on it. How can I reset the is board the way it came from the factory please?
why you need to return it to factory condition. Didi you try this ruclips.net/video/gpyeMjM9cOU/видео.html , when you setup your board correctly then you can upload factory example , you can find it in git repo showed in this video
I could not see anything on the Serial Monitor. I fixed this in the Arduino IDE (on Windows 10) by selecting the Tools menu and setting "USB CDC on Boot" to Enabled.
Hello Volos Projects! Thanx for your great videos! I used one of your codes for my first esp32 project. Can you answer me this… Is the s3 Display brighter than the one of the ttgo?
Sorry, I was thinking of “another new ESP32 with built in POE! IT DOES NOT HAVE A POE HAT. I LOVE YOUR ESP32 WITH SCREEN. PLEASE CREATE PROJECTS USING IT. IDEAS. GOD BLESS! LOVE YOUR VIDEOS!
Please make a nice AQI with PMS5003 or Cubic PM2008 (DFRobot). I have both and you cook, 3d print, have allergies or you make aport in a badly polluted city, you can help to bring a little of health.
I subscribed to your channel and since I'm already a Banggood customer I'll make sure to use your link when I buy this board, I wanted one of these anyways and now with the help of your videos and the sketches it's way easier for me to get into this particular developer board, it's pretty hard to find good tutorial videos about these boards and in a language that I can understand so thanks a lot for doing this. I'm looking forward to the next video you come up with and since I'm new to your channel I'm going to watch some of your older videos to see if there's something that's useful to me for my projects. Best regards, Ricardo Penders.
Important! My apologies, in the video I stated that esp32 is single core which is not correct. Both chips are dual core. Sorry for that confusion.
Yeah. The ESP32 S1 (SOLO-1) is the board with the single CPU.
We'll let it go - this time. :)
In theory esp32 has 3 cores, but only two can be used.
@@prov_s195 4 if you include the double secret core!
I used to believe in you man. 😟
Can it run Doom?
Yes
Hello my friend. Can you Link to some page with actual projects for this Board? I would like to understand more about it and make a simple internet monitor for my home.
Your videos are getting better and better. I'm looking forward for the awesome projects you'll make with this new-good-looking board. Good luck.
Thank you, i am trying to improve them.
Hi friend, I’m newbie to this, let me ask you please, is this nice stuff for comunication and monitoring lifepo4 batteries? Thanks!
Built in display buttons and battery monitoring? I want one!
I'd love to learn S3 with you 😀
wait, display buttons? it has touch capabilities?.. I missed this from the video
@@arsenyspin1726 i night be wrong! I am still waiting on mine to ship from banggood! Over a month now! I am thinking of ordering the Adafruit equivilant in the uk
This would be a good project for a 'fridge thermometer' a little light detector for when you open the fridge, a little thermocouple to measure the temperature, screen turns on when you open the fridge due to the light coming on, and shows the current temperature with a graph over the last 12/24 hours. Shows little yellow lines each time the door was opened (light sensor activated). Logs the temp in say 15 minute intervals.
not a good idea to put thingies on cold tho, better just put the tc inside rest outside
@@fltfathin how do you connect the two though?
Maybe put the display on the outside so you don't need to open the fridge to see the temp
@@fltfathin ah, I know it's not the best environment, but gotta learn about building things in the real world, ya know?
@@lpeter1172 umm slip the thin cable thru the door? that'll work for most application
Veeery cool!
I took your code and did a lot of spiffing upon it. Now, the time changes uniformly and the useless extra array of numbers is gone. Running at 22 fps when I started. Now 27. Interesting code in spots. The debounce is interesting. Not really a debounce but it does let the code keep running even with the button still pressed. Better than some demos I have seen.
€22,54 😭
I just purchased the board via your link so I hope you'll get your commission on that, I got it even cheaper than you because I'm a Banggood VIP member and I had some BGPay money from the commissions that I got from peoples purchases so I cheated a little bit.
Great Video!
Would be great to see this board used for a SDR Radio Receiver waterfall display!!
Good afternoon
cool board
quite powerful
I'm really looking forward to the Internet radio with a weather station and a clock :)
thank you for your work
I ordered 2. lets hope you got some kick back from your link.
Such a great little board although runs slightly hot. Always in awe of what you are able to make these devices do!
What about of the brighteness of the display? It is readable outdoor under a sunshield/suncover?
Maybe the brightness can be regulated/pumped up?
A very lively and nice looking display.
Smooth animation, a pleasure to look at!
What software was used to create the GUI HMI interface?
i didnt use any software. pure code
That is almost a smartphone!
Please help!!! I love your channel and you are the one who got me into the ttgo boards. I have one that I accidentally ripped the screen off of do you know of any way to get a new one or use one of my other lcd screens? I am running the resistor calculator sketch on the board and ripped the ribbon cable trying to put it in a case. Any help from anyone would be greatly appreciated!!!!!! Thanks
Hello, this happens to me also, i tried to solder it again but it didnt work, so i had to buy new one. Sorry bu i dont have solution to your problem 😔
Where can I obtain the .zip resource library for the ttgo s3 display tft_espi? Thank you
How do you develop these fantastic GUI'S in your examples ?
Nice video! Could you recomend me a nice and complete kit to star with ESP32 from 0. Thanks
Tbh.. the looks like more than 32fps.. what a beautiful screen!! Subbed to not miss the projects 😁
With all due respect, your english is wonderful my friend. Cheers
☑ CORRECTION RE: DUAL CORE
All of your "old" T-Display boards are also *dual* core my friend!
ESP32 has been primarily dual core since launch.
(Espressif later released cheaper single core platforms, distinguished by having a "2" in the name. Seriously. If the ESP32 has a "2" in the name, like "S2," then it has a *single* core.
Because "TO HELL WITH COMMON SENSE!" said every marketing team, ever.)
I didn know that, thank you!
This is great,git hub repositry?
i forgot, tnx github.com/Xinyuan-LilyGO/T-Display-S3
That’s a nice board, something else for my shopping list! Thanks 👏🏾👍🏾🤓
Try to not spend to much :)
Love your videos and tutorials! Is there a way to debug the lilygo s3 amoled? Compared to other esp32s3 devkits which have 2 usb interface (1 usb, 1 com/uart), these have only 1 usb interface. Thanks!
Great site. Looking forward to follow you. THANK YOU for your work !!!
Hello! Have you attempted to use/mount SPIFFS file system on this board? Just curious, as I have had issues with both the S2 and S3 versions of ESP32 Adafruit boards...
Too much pointing and hand movement which is VERY distracting and annoying.
Couldn't find the resolution for the ADC. Would love to find a display board with 16bit adc and pga already onboard.
Not sure, i think its 12 bit
Excellent video, you do really great work. That screen looks stellar. I got the code from github compiled and uploaded to the board (using arduino IDE) and nothing displays on the screen, so I tried a second board, same result.
I put my WIFI ssid info in . My thoughts are that it wouldn't compile and upload if there were missing libs
The screen is black, I'm doing something wrong but I can't figure it out.
I'm open to any ideas :)
My Bad, Had the wrong board selected. I know my glasses are around here somewhere :) It works great
Cool, your projects are well explained and fun to learn. I've been following along with my T-Display (first version). Looking forward to getting a T-D-S3 and following along. Your work and videos are beautiful. Hello from Canada:) yay Volos yay TTGO
Thank you, i also cant wait new project and videos, if you have idea for video feell free to share it so i will see what i can do.
Do your projects for old TTGO T-Display run on the new ESP32-S3 board?
My friend I am bit confused about how can you read an analog signal from pin 44, while it is not an ADC input (according to the pinout diagram in your video)?
New sub!!!
The older ESP32 chip is also dual core, though there are single core versions of it but your TTGO board there is the more common dual core! The main differences between the ESP32 and ESP32-S3 are the S3 has slightly less RAM (512Kb vs ESP32's 520Kb), more GPIO than the ESP32, BT5 (LE) implementation, better low power modes, plus an AI acceleration support from vector instructions whatever that does! lol
tnx, i admit i made whole mess with thease wrong information i will need to coreect in next video. tnx for help.
Now that is an impressive board, thinking of so many things could use It for and that display, joyess.
Yes, there is many possibilities
Would be a nice size for a directional compass in the car and for walking.
Great video for people who already know what it is. Personally I found it useless in telling me what this thing actually IS, even though it looks really interesting. I'll have to find someone else's video to discuss it's application. I gave up on this one after 6 minutes.
It already got more expensive: 22€
Now it costs 15$
@@sergiismyrnov Yes, I have just seen it at Banggood, today. The reason might be that the next version T-Display S3 amoled is out and it costs roughly 30€
Both ESP32's are dual core. It's a nice product, looking forward to more instructional videos. Thanks a bunch!!
Indeed, but S3 uses LX7 cores vs the older LX6.
Hello, i bought lilygo t-picoc3 instead of esp32 by mistake, idont now even how to get started with it! are the codes work the same way for both?
Great video thanks! In your opinion, what would be the best camera to integrate qr reader into this board?
hello nice projects . but i am looking for a code for a t-displays3 a crypto ticker for my luna classic to usd.
can you help me with this
does this accept video streaming or WIFI video input?
Hi all! esp 32 + il 9341 almost works but only one cycle.😀
Thanks - I have subscribed & ordered a board.
Thank you😀
hi sir. can you make a network traffic monitoring project with esp32 board on round tft display?
1st time to your channel and this is a neat board so I'm very much looking forward to seeing more projects using it thank you for the excellent introduction
Thank you and welcome aboard, nice to hear that you like video.😀
Which ACTUAL chip is on the board? The variants listed in Espressif's datasheet are: ESP32-S3, ESP32-S3FN8, ESP32-S3R2, ESP32-S3R8, ESP32-S3R8V, and ESP32-S3FH4R2.
It's an ESP32-S3R8.
Looks like something i dont need but want.
I know the feeling.
am i the only one wondering how tf you're meant to solder those pins with the screen attached?
I need this for my electric cart build.
Hi I enjoyed watching your video. I looked at your code and you seem to be using a lot of magic constants. This puts the burden of understanding what those magic constants represent on anyone who is reading the code including future you. Declaring what those numbers mean can greatly improve legibility of the code for both inexperienced and experienced coders. Doing so should have no effect on the size of the compiled code. Thanks for posting the vid.
Thank you, yes i am aware of this problem , my code is hard to read and understand sometimes. I will try to make it more readable. Tnx again.
How much digital pins is free for use with lcd?
we can add microphone to t-display esp32
Thank you again for you’re videos. One question. Don’t you have to unmount the screen to be able to sold the pin’s headers? Thanks 😃🤟🏽.
Hello, tnx for comment :) . I think that they can soldered from side, but slow ad carefully.
That's excellent. I just ordered one. o7
can I run the bitcoin ticker on the new display ?
That took 'em all of 5 seconds to discontinue. Sad Panda :(
Hi, just came across your channel - very excited to see what you can teach me about this Lily GO T-Display S3.
Tnx, benny, welcome😀
saya suka dengan penjelasan anda menggambar dengan code😅
That's an impressive display
I get the following error. Would you be able to help me.
cp: cannot stat '/home/pi/.arduino15/packages/esp32/hardware/esp32/2.0.5/tools/partitions/default.csv': No such file or directory
exit status 1
Error compiling for board ESP32S3 Dev Module
This is just Excellent.
Thank you for sharing your knowledge with us.
And ordered! I am consistently awed by how good the screens of your projects look (and to be honest, I'm a little jealous) :-)
I am spending lots of time with colora fonts and shapes. Thank you!
@@VolosProjects Woo Hoo - Mine just arrived!
@@IncaTrails hahah, nice. have fun😀
This looks REALLY good! This might even make a fully featured Meshtastic/LORAwan device possible. I'm getting old school pager vibes already.
I stumbled upon a few of your videos yesterday and it inspired me to get a few displays. one of them was delivered this morning so I'm excited to try it out.
The Grove connector, is it for i2c modules?
yes
I'm going to have to pick one of these up. I've been wanting to start learning Arduino type programming. And I already have a little project in mind for this little display, Honestly nothing innovative. I just want a tiny clock lol.
This board will be great clock, you can find few internet clocks on my chanell so feel free to check them out
@@VolosProjects I just ordered a board a few minutes ago. Hope it doesn't take a month to get here, lol. I'll be watching your videos in the meantime
Dude. This board is awesome. Great veeedeeoh.
have you noticed the chip getting hot running video?
This device looks great!
Thanks from Colorado
This is great to discover you and this little gem of a board!
Hi Volos, great video as usual. Thank you for your work! Have you tried to power this board without using USB? The schematics suggest it should be possible, but mine won't boot when I power it from the 5v pin (or from the li-po connector on the back). Any ideas would be great. Thanks again for the great videos.
Here is your answer 😀 ruclips.net/video/50uPv7tsVIc/видео.html
@@VolosProjects Thank you sir! These 2 lines in setup():
pinMode(15, OUTPUT);
digitalWrite(15,1);
...were exactly what I needed, can confirm that they work for power from battery or 5v rail. Perfect! 😀
Correct 😀
I LOVE YOUR ACCENT!
They skimped out on 2 additional mounting points to create a secure attachment for a few cents of saving money during the manufacturing. It's a nice display but I would want 4 screw holes.
Hi I've tried several times to load this programme but have encountered several issue when trying to verify the code. the first one is "exit status 1
suggest explicit braces to avoid ambiguous 'else' [-Werror=dangling-else]"
any help would be appreciated.
ruclips.net/video/gpyeMjM9cOU/видео.html
Video was posted Aug 25. Now, Sept 23, the banggood link leads to: "LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution
*This product has discontinued* ." 😪
In Banggood it says:
This product has been discontinued. We have recommended the following items for you.
I Ordered one when first saw this video, waited and waited, eventually, I was refunded as they said it is out of stock.
I there an alternative?
BTW, still can find it in AliExpress
you can buy it directly from lilygo
Great video! Thanks for the info. I will order one and I subscribed. Thanks. - sweden
Thank you, you will love your new board.
ive just wasted ten mins of my life
If you use metal screws for mounting, the wifi signal will be weak, because the holes are located next to the antenna.
TTnx, i didn know tat screw can mess with signal.
@@VolosProjects You can check ESP32 datasheet for proper placement of the antenna.
Subscribed and liked! I just bought two of these thanks to seeing them on your video. I have been impressed by all the Lilygo products I've seen so far and this one also looks excellent.
6:44 , i think esp32s3 which used in new ttgo display working exactly the same with the old esp32 but in more powerfull way, where both of them have 2 cores and also both of them support ble and bluetooth classic, i think the main differences of the esp32 s3 is that it also come usb to serial hid without removing the second core and the bluetooth connectivity, CMIIW
For my son I bought a ttgo t-galary whereas I can’t find any Pinout documents, examples or other Google results. He has now a present which is useless as the lilygo GitHub only has a set of binaries for his device.
Who can help in obtaining the pinout? We only figured out the pins for the buttons and microphone. Who knows which screen type and which pins we should use?
TTgo T-Galary?
great video, but, the sketch would not compile - many errors
Find my video, how to install t-display s3
Hi, I made a CO2 air quality monitor, which uses the graph from this video. May I write an article of my work into codeproject web site. I will mention you in the article and put a link.
yes ofc, thank you
I wonder you can make VU meter
Surprised you have any free time to make videos , but glad you do. Just ordered two (just in case one doesn't work). Thanks for the great content.
I am still on vecation, and while she is sleeping i write code. We will see, i am returnimg to my work very soon necause schooč year is starting. 😀
@@VolosProjects , 😄😄..
Thanks for your videos & Good luck to You!
Respect frm .EE ))
I need to get my board back to factory condition. I am not able to get ESPTOUCH to connect to the board. No sketches will run on it. How can I reset the is board the way it came from the factory please?
why you need to return it to factory condition. Didi you try this ruclips.net/video/gpyeMjM9cOU/видео.html , when you setup your board correctly then you can upload factory example , you can find it in git repo showed in this video
I could not see anything on the Serial Monitor. I fixed this in the Arduino IDE (on Windows 10) by selecting the Tools menu and setting "USB CDC on Boot" to Enabled.
Hello Volos Projects!
Thanx for your great videos!
I used one of your codes for my first esp32 project.
Can you answer me this…
Is the s3 Display brighter than the one of the ttgo?
Sorry, I was thinking of “another new ESP32 with built in POE! IT DOES NOT HAVE A POE HAT.
I LOVE YOUR ESP32 WITH SCREEN. PLEASE CREATE PROJECTS USING IT. IDEAS.
GOD BLESS! LOVE YOUR VIDEOS!
Please make a nice AQI with PMS5003 or Cubic PM2008 (DFRobot).
I have both and you cook, 3d print, have allergies or you make aport in a badly polluted city, you can help to bring a little of health.
I subscribed to your channel and since I'm already a Banggood customer I'll make sure to use your link when I buy this board, I wanted one of these anyways and now with the help of your videos and the sketches it's way easier for me to get into this particular developer board, it's pretty hard to find good tutorial videos about these boards and in a language that I can understand so thanks a lot for doing this.
I'm looking forward to the next video you come up with and since I'm new to your channel I'm going to watch some of your older videos to see if there's something that's useful to me for my projects.
Best regards,
Ricardo Penders.