I have this same desk and mine just had the exact same issues with the ball bearings falling out! It's so odd because I don't really lean on it at all and seeing other comments from people saying they have the same desk as well leads me to wondering if it is a common issue for this desk. I'm completely useless with anything hands-on so I'm going to show this video to my dad and make him help me fix this-- thank you so much for your video! Amazing how it's still helping people 4 years after you've made it. :)
It’s crazy house this same desk brought us all together to your video , luckily my bearings didn’t come out, I’m going to try some grease on the rails, it’s been sliding unevenly for a while now so I figured that should help, thanks !👍🏽
thank you for this! i have this desk and i couldnt fix it before watching your video. i didnt know the little bumps were actually ball bearings and once i got them into the groove it was easy. i also had to bend the bars holding the tray inwards a little because they had bent outwards slightly
Thank you for the video! Because of this it gave me the idea i need to fix mine! My tray came off without any of the barrings balls dropping, so what i did was alined the bars and snapped the. Into place using pliers.
This video helped a bunch! The only problem I have now is I can't seem to pop the rail back into the slider. There's a piece of metal acting as a "catch" on the end of the rail that grabs the slider to stop it from all coming out, but it's stopping me from sliding the rail back in. The way you just pop it into place by sorta levering it in doesn't seem to work for me. Regardless, thanks for you video, it helped me get my head around how it's supposed to work, next step is finding a solution lol
I was looking for help online with fixing the sliders on and saw that you hold the sliding ball bearing bit and the other piece of slider should glide on to it when you insert it it into the slider section that’s attached to the desk.
glad you made this video. I use this desk in my studio and added some spacers to fit my komplete kontrol s61 MKII keyboard and it came crashing down today, so I'm trying to figure out how to fix so it doesn't happen again.
I had to put spacers in mine for a Roland SH201. I have since sold that and now have a Keystep Pro and a Microfreak which crashed to the ground this morning. 😞
Iseekoutthetruth yeah o finally fixed it I had to take it apart to snap the slider back into place but it looks like it's still not in place fully but it's working just can't lean on the keyboard lol
This is how mine broke. My desk is pressboard (I think) so both the desk and tray were the same so I took out the sliders and used 5-6 wood screws to screw the tray to the desk so it no longer slides but it's very strong. It's sad about the build quality of stuff today.
Lol my tray popped out and it happened like a year ago and I remembered this as you said you can't pop it in and I kinda tried to do that, I ended up getting a 1cm deep cut that went into muscle that left a scar and still has to this day.
I got this same exact desk and the issues with the keyboard tray led me to this video. Even though this is a useful video, I think it's proof that the table is 💩💩💩💩 but appreciate the video
I replaced my slides with stronger ones on amazon for $14 and they are height adjustable. Had to drill a new hole to mount, but I won't ever have this problem again.
I have the same problemm I got the tray into the slider but if i pull it too far it will come out agai, so how do i lock it after an appropriate distance Please help me
@@Iseekoutthetruth thanks I actually put the black thingie which came off of the channel on to it again and it stopped. Again thank you for replying.....
I thought you were the solution! Alas, my keyboard drawer slides do not have ballbearings. I have gotten the drawer back onto the tracks - but not for long. And now I have the keyboard on top of the desk. Boohoo!
Things are flimsy as hell, haven't seen a sturdy one yet. I'm sure.. maybe 500 dollar desks or more, but I buy $100 dollar, maybe 130 max, they do the job, just don't lean on it. Haha. Good job though.
@@Iseekoutthetruth Nice! You have a nice desk, all the one's I've bought have been not very sturdy. What kind of desk is it and who makes it? You still have it I assume, the vid is 2 yrs old?
Iseekoutthetruth It’s a z-line desk Cyrus workstation. I have this desk too. I also have the same problem with keyboard rail. I called the company and I was being charged almost 60 bucks for the railing with shipping. Told myself it isn’t worth it for that price would just buy another one
I have this same desk and mine just had the exact same issues with the ball bearings falling out! It's so odd because I don't really lean on it at all and seeing other comments from people saying they have the same desk as well leads me to wondering if it is a common issue for this desk.
I'm completely useless with anything hands-on so I'm going to show this video to my dad and make him help me fix this-- thank you so much for your video! Amazing how it's still helping people 4 years after you've made it. :)
Glad it could help. Good luck to you. Thanks for watching.
It’s crazy house this same desk brought us all together to your video , luckily my bearings didn’t come out, I’m going to try some grease on the rails, it’s been sliding unevenly for a while now so I figured that should help, thanks !👍🏽
Thanks for Watching.
thank you for this! i have this desk and i couldnt fix it before watching your video. i didnt know the little bumps were actually ball bearings and once i got them into the groove it was easy. i also had to bend the bars holding the tray inwards a little because they had bent outwards slightly
Cool, glad the video could help you out, thanks for watching.
Thank you! I have this exact desk and your video helped quite a bit.
Cool, glad it could help you out. Thanks for watching.
Thank you for the video! Because of this it gave me the idea i need to fix mine!
My tray came off without any of the barrings balls dropping, so what i did was alined the bars and snapped the. Into place using pliers.
As long as it works.
This video helped a bunch! The only problem I have now is I can't seem to pop the rail back into the slider. There's a piece of metal acting as a "catch" on the end of the rail that grabs the slider to stop it from all coming out, but it's stopping me from sliding the rail back in. The way you just pop it into place by sorta levering it in doesn't seem to work for me. Regardless, thanks for you video, it helped me get my head around how it's supposed to work, next step is finding a solution lol
good luck, you'll figure it out.
I was looking for help online with fixing the sliders on and saw that you hold the sliding ball bearing bit and the other piece of slider should glide on to it when you insert it it into the slider section that’s attached to the desk.
glad you made this video. I use this desk in my studio and added some spacers to fit my komplete kontrol s61 MKII keyboard and it came crashing down today, so I'm trying to figure out how to fix so it doesn't happen again.
Hope you fix it.
I had to put spacers in mine for a Roland SH201. I have since sold that and now have a Keystep Pro and a Microfreak which crashed to the ground this morning. 😞
mine didn't break that way but it kind of just had one side fall down. I have that exact same desk
+jazzygirl198 cheap computer desk.
Iseekoutthetruth yeah o finally fixed it I had to take it apart to snap the slider back into place but it looks like it's still not in place fully but it's working just can't lean on the keyboard lol
yea you can't lean on them they will break.
Same desk, same thing. My right side just slipped off one day.
Same desk same problem
This is how mine broke. My desk is pressboard (I think) so both the desk and tray were the same so I took out the sliders and used 5-6 wood screws to screw the tray to the desk so it no longer slides but it's very strong. It's sad about the build quality of stuff today.
yup there is no quality in things built today.
This helped me greatly. Thanks
Cool, thanks for watching.
The part where you show the angle required to reinsert the bar is exactly what I came here for. Thank you!! My sliding keyboard tray is back together.
Glad it could help you out.
Thank God you helped me out
Glad it could help, Thanks For Watching.
@@Iseekoutthetruth you're down to the earth and so humble. I hope you will Reach top level soon
@@hjhgvuytr4555 Thanks.
Lol my tray popped out and it happened like a year ago and I remembered this as you said you can't pop it in and I kinda tried to do that, I ended up getting a 1cm deep cut that went into muscle that left a scar and still has to this day.
Ouch
@@Iseekoutthetruth indeed
I got this same exact desk and the issues with the keyboard tray led me to this video. Even though this is a useful video, I think it's proof that the table is 💩💩💩💩 but appreciate the video
Lol, yes it is.
@@Iseekoutthetruth I wrote this before I read the comments and sheesh, everybody has the same issue with the same table 😂😂😭😭😭😭😭
I replaced my slides with stronger ones on amazon for $14 and they are height adjustable. Had to drill a new hole to mount, but I won't ever have this problem again.
I ended up throwing it away.
Good job. Those things are not very sturdy.
yea they are very weak but so far still working.
for me both sides have all the required bearings but the left side tray kept being loose and sometimes faling but i fixed it
cool.
I have this same desk and I haven't lost the little balls but the little track came out and I haven't been able to get it in 😣
It's tough to do.
Thanks.
Thanks for watching.
Tnx bro🥺
🙂
I have exact similar desk
Cool, I still have this desk.
I have the same problemm
I got the tray into the slider but if i pull it too far it will come out agai, so how do i lock it after an appropriate distance
Please help me
put screw to stop it.
@@Iseekoutthetruth thanks
I actually put the black thingie which came off of the channel on to it again and it stopped.
Again thank you for replying.....
Ha we have same desk, same problem.
Got a new desk now.
i think we need to screw up these things too..!!!
ok.
Mine won’t even slide at all. What’s wrong ??
Take it apart and see.
Iseekoutthetruth
Mine is rolling it has no balls
Mr.CoyoteTV sounds like they fell out.
I thought you were the solution! Alas, my keyboard drawer slides do not have ballbearings. I have gotten the drawer back onto the tracks - but not for long. And now I have the keyboard on top of the desk. Boohoo!
+Marny5580 those sliding keyboards are garbage.
Things are flimsy as hell, haven't seen a sturdy one yet. I'm sure.. maybe 500 dollar desks or more, but I buy $100 dollar, maybe 130 max, they do the job, just don't lean on it. Haha. Good job though.
This one is not flimsy and we leave az n on it all the time and it's still looks new and working great.
@@Iseekoutthetruth Nice! You have a nice desk, all the one's I've bought have been not very sturdy. What kind of desk is it and who makes it? You still have it I assume, the vid is 2 yrs old?
YES, I still have it. I do not remember who makes it, maybe I say it in the video, but there is no name on the desk.
Iseekoutthetruth
It’s a z-line desk Cyrus workstation. I have this desk too. I also have the same problem with keyboard rail. I called the company and I was being charged almost 60 bucks for the railing with shipping. Told myself it isn’t worth it for that price would just buy another one