DIY Flying bike - Motorcycle to Hoverbike - Modified version
HTML-код
- Опубликовано: 1 дек 2024
- Hello, friends!
In my previous video, I shared with you the process of creating a Hoverbike that was supposed to lift off the ground by a few meters and hover in the air. Unfortunately, we didn't achieve that goal at the time.
Many of you wrote to me suggesting that I should modify it by adding electric drone motors for stabilization, and others mentioned that the propellers should be repositioned higher than the center of mass. Well, I decided to take your advice and have now revamped the Hoverbike, with the propellers now positioned significantly above the center of mass.
What do you think of this version?
Please share your thoughts in the comments, and don't forget to share this video.
For those who are seeing this video for the first time: this project is about transforming an ordinary motorcycle into a Hoverbike, aiming to merge the thrill of motorcycling with the cutting-edge realm of aviation. Join me on this journey of innovation, where we explore the challenges and triumphs of making a bike fly. Let's dive into the details of the modifications and see this Hoverbike take to the skies!
#hoverbike #flyingcar #flyingbike #mwig
Even if it doesn't end up flying for now, his skills as a Fabricator are MIND BLOWING! I love it XD
Calculate the right attack angle for each blade to help create the correct lift for the propeller.
In the image we can see that each blade seems to have too much turned angle...maybe set them more horizontal !
Install a ring around each propeller so it would control the airflow up and down. Right now the air is going out to the sides. You can see it in the video how the propellers are blowing everything to the sides. With a tube around each propeller you would control the airflow coming from above the bike straight down so it would give you lift at much lower rpm.
but stiil been so heavy, the propellers may not be the right ones and it needs a lot simplicity with a plus carbon fiber elements. I sugest calculate this machine for better results.
That’s the least of the problems. A quad copters propels spin at different rates to keep a level.. of the skirts more than a few feet off the ground that’s going to flip. This is a huge waste of time. Pointless. The Dude must know this and is only doing it for RUclips viewers. But there will be enough dumb people to believe at all Work and will watch it unironically
Ducting will not solve this problem
@@Gordon-Scott But it will help, and it is a good starting point.
@@Gordon-Scott Carbon fiber would be ideal but keeping with his metal working background make it out of 1.2 mm aluminum with ribs from same aluminum to give it some strength. By using a motorcycle the hole thing is shot but it is something to keep viewers engaged. Need a much smaller gas tank, much smaller seat and remove everything of off that machine that he can. But like I said I don't think this is truly meant to fly high.
your YZF R1 has plenty of engine power. What you need to make your drone take off is either bigger propeller blades or a higher ratio in the gearbox. The engine will take longer to get the propellers up to speed, but in return you will get much more lifting power and at the same time you will get much more control over the drone.
It’s all about love… 😍
Keep up the good work… 👍
Good point!
@@meanwhileinthegarage🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
More .....👇
🔴 THE RETURN OF JESUS
I think you should try with tilted propeller shaft of which force will be pointing to center of the motorbike , such that you can use a bigger size propeller( perfectly engineered like aircraft), make the top cage like circular/arch and reducing atleast 70 kg weight.
use single shaft from engine to the center of 4 propeller and then distribute with four shaft on top of your head, that's how you may reduce weight excluding the base structure. Cut all the excessive parts you don't need.
And see how it flies with minimal power of the motorbike. 🎉❤
When something goes wrong, it's not a failure, it's a learning experience...congratulations for the idea !
I agree, you are a very skilled fabricator and engineer. It won't fly because its too heavy. To produce enough force, you would have to have propellers at least 2.5 times the mass of the rig. Even then, you'd only get a few feet off the ground. If you had materials just as strong but at a quarter of the weight could work too. Whether it flies or not, we will all be cheering you on!
I really respect your determination.... Remember, the difference between success and failure, is determination..
Man könnte es aber auch Wahnsinn nennen. Ich dachte wir wären schon "etwas weiter" wie die Brüder Wright - also man sieht auf jeden Fall, dass da VERSCHIEDENE Dinge so nicht gehen können - von dem armen Motor will ich noch nicht mal reden. Der raucht dann vermutlich ab, wenn oder falls man damit je 20 Meter höhe erreichen sollte. Weil alleine die Bodenpartie ist schon gefühlt wie ein Betonanker, von allen anderen Problemen ganz abgesehen. Also VIELLEICHT sollte er sich da jemand holen, wo sich mit Fluggeräten auskennt, die auch berechnen kann, oder seine Lebensversicherung auf maximalen Auszahlbetrag erhöhen.
Питер Паркер ты серьезно??)) эволюция очень быстро избавляется от таких людей🤣🤣
Great work, even if it didn't fly. Get a smaller engine, make thinner blades, spread them wider apart, and ditch most of the bike. Thrust to weight is the key.
He isn’t taking weight into consideration whatsoever
@@600wheelI agree. However, it's all learning. Learning takes mistakes to gain experience.
@@criticalmass181 I would think something like weight would be obvious to anybody attempting to build something like this
Lessen weight of unnecessary items of bike, larger engine, larger blades. Far far too complicated to try to do adjustable blades for collective. It would be possible to add extra vanes to act as a cyclic control, but leaning in a craft that small will accomplish that. As far as ground effect, when you lift off, you lose ground affect as you ascend. A helicopter does not have the propeller near the ground. They depend on much larger airfoils/vanes and engine HP / speed.
You have to increase lift from propellers and lose weight. You were 360kilos on bike engine/frame before installation. Now maybe double that 700+ kilo. 1,500-1,600 pounds will take much large air movement to lift the craft that with everything added was pushing 900 kilo. 2000 pounds (USA) =909 kilograms.
i think the blades are not made to fly the plane vertical. to carry and give balance are the mostimportent problems blades are not strang enough
Can’t wait to see the latest update on your wonderful machine 👍
Are you ready for premiere guys ?
yes please hurry up… 2 months of waiting 🤦🏻♂️🤦🏻♂️🤦🏻♂️
26:13 🥺🥺 .. change the propellers … and add gear ⚙️ or change it it’s very slow.. don’t focus on the weight right now.
Yes, but faster 😅❤
I don't understand why no motorcycle 🏍 or moped 🛵 company has built a trike moped similar to yours (in your previous videos) with a recumbent seating position & lightweight aerodynamic removable weather enclosure. So the 🛵 could be used all year in rain, cold and light snow. Just like a car but get 75+ mpgs using a 300 to 500cc scooter engine & cvt drive train. So it could go 80 to 85mph capable of traveling on USA 55mph hwy & 75- 85mph interstate systems. The aerodynamic enclosure and recumbent seating would make it about 35+% more efficient. Than the upright riding position of a motorcycle where your body is creating major wind drag.
JUST BUILD A 1000CC HELICOPTER. SHIT WILL HAVE CRAZY PERFORMANCE
Отличная идея! Ховербайк явно нужно немного облегчить, такое ощущение, что не хватает совсем немного. И главное - предлагаю поменять передаточное соотношение - поменять звёзды, и, таким образом, поднять обороты на винтах еще сильнее.
Great idea! The hoverbike clearly needs to be lightened a little, it feels like it's missing quite a bit. And most importantly, I suggest changing the gear ratio - changing the stars and thus raising the rpm on the screws even more.
облегчить убрав седока))
Usar conjuntos de engrenagens nas hélices aumentaria muito a rotaçao delas e diminuiria a do motor da moto.
It was a great try. I'm looking forward to seeing the next update on your flyer. I've been a fan of your channel for a long time and I absolutely love it!
Thanks bro. I really appreciate it.
Something to consider, although it may have minimal effect here, is the force pushing the assembly down from the airflow moving against the upper grill, your body, the motorcycle, and the drive covers below the bike. If you could reduce this in some manner, it may help. I'm sure having the upper grill between you and the blades is great protection, though. Most drones have the blades in free air with minimal frame material in the air flow. You've probably thought of this already. Really appreciate your effort and craftsmanship.
Маша Аллах1 давно смотрю вои эфиры и с огромным интересом смотрю Дал аьтто Бойл
Амин, вай массери бойла АЛЛАХ1А аьтто сан ваш
Давно смотрю Вас, экстремально. Берегите себя! Несущие винты у земли с одной стороны выглядели опаснее, с другой вероятно, создавали большую подъемную силу, в начальный момент поток ближе к земле, ну и валы с крепежом добавили веса. Удачи Вам!
Waw, looks like a lot of work since the last video. And you are alive and well, that is good 👍😁
I think you should leave it for now and revisit it from time to time. Eventually you will get it perfect. People like you always get things done eventually. It will come to you. Thanks for sharing all your creations.
Мовсур я на испытаниях аж покурить вышел. Мне кажется в ногах пропеллеры безопаснее выглядели. Берегите себя!!!
Спасибо Михаил. Не передать как страшно было)))).
МашаАллах! Вы какие молодцы, подкованные технически. С уважением из Дагестана
Directly from Brazil, we followed your saga in this project. I wish you success.
So close to taking off I wish you had a video every week, better luck next time 👍👍
I will try my best
I couldn't to see it fly, hover at least 5 meters above the ground. I admire your ability to build such like that!
that looks like it's balanced better and safer.
My favourite engineer/machinist/fabricator on here (sorry Kurtis and Adam 🤷🏻♂️)
Цхьа К1ант вукх хьо !
Цхьа к1ант вукх хьо. Вот так будет правильно, main Freund.
Золотые руки у тебя, мастер. Respect
توجد 2 مشكلة :-
1- عدم وجود دعامة قوية بين الأرضية والسقف.
2- الوزن، لا يمكن لسقف حمل وزن الدراجة وباقي أجزاء الأرضية.
أقترح زيادة عدد الأجنحة أو تقليد فكرة الطائرة المروحية بوجود جناح كبير جداً.
شكراً لإستمرارك بالمحاولة، هذا شيق حقاً، واتمنى أن تنجح.
Ин шаа Аллахь всё получится и он взлетит. За БОРЗ отдельный лайк. Аллахь аьтто бойла
Don't give up.
Bro!! You got this. I feel you’re on the right track.
Delete the wheels and replace them with skis or nothing at all - this will reduce the weight. Every gram of weight counts.
Везчу Дала аьто бойл хьа, са вош.
Амин, хьаъ бойл са Ваш
Амин!
free phalstin ❤❤❤ thanks for your vidéo ❤ your fan from Algéria
You should just remove the engine, sir, and the body of the motorbike, so that it reduces the weight, but you don't need to increase the load, and I will support you enthusiastically
Huge fan since you started. I’m a retired mechanical engineer in Kentucky USA. I wondered from the beginning of this build why you didn’t apply twist dynamics on your propellers. They, and I’m a novice in aeronautical engineering, but it’s my understanding that they create more force because the hub spins faster than the outer of each propeller. Ie. more twist, more force., also more stability. Good luck my friend
Huge fan! Pun-tastic...
Tip speed is always faster then the hub speed
Too heavy carbon, fiber, better material, and your propellers are too small😂😂
In place of these equipment you can use drone moters I'm sure this machine will take off
Benar sekali sependapat dengan saya👍👍
Sim as hélices Tmb achei pequenas mais se você colocar maior o espaço entre uma e outra não daria né mesmo, será que teria jeito de colocar maiores abraço
I hesitate to make any comments sitting in a chair and having never built anything as beautiful, brilliant and complex as you have. I have read that power required goes like the cube of the prop tangential velocity, so two big and slower turning contra-rotating propellers might get you more lift for less power. Best of luck.
Hey, that's ok friend!!!
Thank you for teaching us to be brave and try things even if the result is not guaranteed. We will still learn A LOT in the process and approach the next try with a LOT of knowledge we never had before.
the moto is too heavy !
Это просто круто, главное не останавливаться на достигнутом!!!
Must say your determination will pay off in the end but weight is your big problem
" Excellent cultural serial with modern machines and smart ingenious to fact auto designs and possible new invents, with so much fun and hard work hours...! congratulations for all team to produce this technogical cultural serial for auto designers and begginers around the world with lot fans " 😊
A helicopter pilot friend of mine was trying to build a similar vehicle 15 years ago. This design was a mixture of a jet plane and a motorcycle. We made a "mockup" together and he went to a fair in Dubai with the mock-up to find sponsors. But he couldn't find anyone to give 1 million dollars. :D His hoverbike design was just like yours, but his had a small helicopter engine under his seat. Instead of propellers, there were 4 fan outlets, just like on Harrier planes... But when he could not find a sponsor, he wanted to use this "mock-up" in a different way. He built a huge robotic arm powered by hydraulic pistons and mounted that "mockup" on the end of the robotic arm. He also sold this new toy to an amusement park :D
(I will leave the Google drive link of the photos of the design under this comment , I hope the link appears.)
Send him the link via email for him to put into the video description otherwise the link is not accepted by RUclips. Links here are accepted for another RUclips videos, that's all.
Have been glued to this channel and my mind is 💥🤯💥! Wow! Master of mechanical aptitude. But this is super dangerous contraption.
For this to work:
1) slightly larger props or double props (ex: upper AND lower).
2) reduce weight.
3) double steering control fins.
Maybe for the next test flight, implement RC controls for throttle and steering. Sure way to reduce weight and increase safety margin.
I'll keep saying it...your a genius
Дружище! Главное не сдавайся! Всё получится! В следующей части обязательно полетишь!
His creativity is on another level ❤❤❤❤❤
Молодец. Дал аьттув боакхалба хьа.
Ты вообще молодец!!! Идея просто прекрасна!!! Круто!!! Просто мощности не хватает. Я сразу понимал что не взлетит, и сразу понимал что ты зря новый мотоцикл купил. Тут нужен автомобильный двигатель 70-80 лошадиных сил, а не мотоциклетный 15-20 лошадиных сил. Ну то есть в 4 раза мощнее нужен двигатель чем тот, на котором ты пытался взлететь. ПРОДОЛЖАЙ!!! НЕ ОСТАНАВЛИВАЙСЯ!!! ВСЕ ЖДУТ ПРОДОЛЖЕНИЯ!!!
I think,you are the best because the inspiration to created for something you have do it.
Всем здравствуйте. Как всегда автору большой респект за проделанную работу и конечно же лайк. Очень хочется что б этот проект поднялся в небо, поэтому хочу поделится мыслями. Авиостроение вообще не простая вещь, при создании летательного аппарата всегда много проблем: масса, тяга, устойчивость, управляемость и еще куча всякого...
По этому поводу думаю что в районе руля много бесполезного железа. Выбрать металл из всех не особо несущих плоскостей. Постараться максимально уменьшить массу. Каждый грамм на счету. Все таки может стоить подумать о замене винтов. Продаются же деревянные для парамоторов. Сделаны с хорошей геометрией, да и тяга известна и оптимальные обороты. От этого можно будет оттолкнуться и посчитать массу и задать нужное количество оборотов. Опять же уйдут громоздкие ступицы. Вот такие мысли, удачи и с нетерпением жду продолжения.
МашаАллах1, Дал т1аьхье беркате йойла👍👍
Амин, хьаъ Йойл са Ваш
Инша Аллах1 т1ем йокхар ю ахь и ☝🏼😄 Дал аьтто бойл хьа!!!
Инша Аллах1, амин хьаъ бойл са Ваш
Ассалам алайкум..Дел рез хил хьуна массо х1уман а...Ин ша Аллах беркате дохийла хора доху де..сан ваша
Ва1алайкум Салам, баркал са Ваш.
Зробіть гвинти трохи більшими, дякую за відео, як завжди класний контент.
Очень интересный проект, братья! Успехов!
Seeing you doing your test flights reminded me of Neil Armstrong doing similar in NASA flying machines. Keep safe and carry on building your wonderful machines.
그대의 노력에 박수를 보냅니다.
You are a hard worker genius, good luck.
Спасибо за твои работы. у тебя все получится
Can wait to see the next one, thank you for the video and i appreciate all your hard work.
Контент супер,смотрю с интересом,вы молодцы)
Good Effort Bro
Best Wishes from India 🇮🇳 Karnataka
Awesome try, now you at least have a whole shop air fan😂😂😂 you are quite an engineer 😊
A lot of respect to your work my brother. I think I know why it didnt fly, its actually a very easy problem. I work with deisgning and testing single and multi rotor UAV VTOL. Your 160hp engine is plenty to lift off but you need to do a small modifications.
Congratulations, you are doing a very great job, keep it up.
Thank you for this prototype that you builded (i had exactly same idea, but no funds). I think it would fly yet, just after small corrections, i would make wider X under the bike, bigger propellers - if 4 couldn't lift, make 6. If you watch carefully center of gravity moved forward (back of the machine want to lift more that front).
Шнобелевская премия! Однозначно 🎉😂
Тоже @thisishorosho смотришь да? :-)
@@meanwhileinthegarage нет
😮😮😮 пыль сдувать 😮😮 просто супер
Your videos are SO AWESOME!! 😆🥰😍🤩😃🏍🚁🛸❗
Glad you like them!
You're right about the weight, and reducing it down to two rotors is the right idea, but co-axial rotors is very complicated and you'll lose more power to mechanical inefficiencies. What you need is a something like a Chinook helicopter, fore and aft rotors, counter-rotating to counter out torque, and staggered, (aft slightly higher than fore) so the blades can actually over-lap each other. That, and drastically reducing the weight !
Лопостиш жим йаккхий хил ези техьш аьл хет сун👌
Great video, always enjoy your content.
Definitely need a stronger motor, OR to replace some of that steel with aluminium.
Double (2 layer) rotors might work since they can grab more air as they spin.
Another option would be to extend the platform to the front and back, then change where the rotors are positioned (1 pair further to the front, and 1 pair further to the back.) Then put a third set of rotors in line with the middle of the bike.
The process of making a Hoverbike is solid, this really requires a lot of effort, I pray that it will be successful quickly
Love u brother i am happy for you great work whenever i am depressed i use to see your videos again again and get motivated jazakAllah khairan kasreea
Ameen. JazakaLLahu hayran ya Ahi
I dare to say: less weight, and largest propellers!...but I am a doctor not an engineer☺...@2010invent idea seems to be very interesting too. Anyway, you're a fantastic mad constructor and I' m always waiting for your videos...go one this way as far as you can!!!
You can make it my friend please keep do it. I do like.😊😊😊
It's still awesome 😎👍 good work buddy 👏
You are amazing bro!
Trying is the best thing , keep thinking , good job ❤
The fanes size is small according to weigh.we encourage your work.God you give success.
Thank you very much for interesting videos.
Хорошая попытка на классную идею 😄 👍
Be encouraged. You will succeed in the end
Changing the design to a ducted fan system will help a lot, now I'm no engineer, but those blades look a bit heavy as well, I know they're expensive, but fan blades designs and materials can make a really big difference.
Good try.. we loved your work.. you are brilliant creater
Nice way to clean up your shop...
I believe that you need bigger propellers and that maybe you should change gears so that the bike is not revving so much.
I would love to see this project literally get off the ground.
So good luck and I am waiting with bated breath for the next video.
Kind regards Richard from Dronfield United Kingdom
Buen video.
Tranquilo que ya casi lo tienes.
Great work, I think weight is no longer a problem when the bike is in motion. Need to try acceleration when the bike is moving.
Great work bro, even if it didn't take off. Hope you may forever be successful .
Never give up! 💪
Parabéns
.. seus projetos são sempre muito legais
Transforma em um hovercraft
ağırlığa göre pervaneler küçük kalıyor pevaneleri büyütüp dişli sayısını artırıp devir kazanmasını sağlamak lazım az güç çok kuvvet güzel bir dneyim bence👏👏👏
Hell yah man, ive been dreaming of doing this for years, let me live vicariously through you! 😂
I have to let you know, it doesnt actually change anything to change where the props are. I think they called it the rocket pendulum effect, or something along those lines... Its like moving the battery location on a rc quadcopter, makes no (or nearly no) functional difference.
Its gonna need you to increase the speed of the rotors, or the number of props... Id suggest simply adding a second rotor set below on the same axle, that way you nearly double the thrust (and of course the amount of torque needed, but i dont think youre anywhere near maxing out that engine.) For a quadcopter to fly comfortably you need minimum 2-3 times the weight in thrust, more is better, but you also need very high levels of torque for spinup/spindown to control angle which there are a few ways to achieve . Youll get it man, i believe in you
😊
Bigger diameter and lower RPM props (with smaller attack angle) - are more efficient in terms of power/thrust ratio. Big two-blade rotors are more efficient than 4-blade rotors. But they have bigger diameter. 3-blade rotors more efficient than 4-blade rotors ets.
You are really close and I agree you need to drop some mass to fly. If you have access to four load cells then use them in a full power runs to see what the apparent load is at full throttle. That should give you your mass reduction goal, I'd say about 10kg should do it. Try a run with minimum fuel and a muffler deletion.
Bro never stop work one day you succeed 💯 😊
❤❤❤boss great job…my opinion this is so much weight that why not flying 😊
Great work sir you are really awesome 👌 😊 I one day meet you
Дуже гарно,КЛАСНА ІДЕЯ