$500 UTV Is The Worst I Have Seen. Will It Run Again?
HTML-код
- Опубликовано: 27 авг 2024
- I buy a $500 UTV that has been sitting for many years outside. #Rough, #UTV,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Thank you for good, quality videos. No cussing, very informative. I really appreciate you and your videos.
It's hard to find any videos without cussing these days, I appreciate Joe keeping it clean
Lol that airbox. WE didnt forget. Let this be a lesson AGAIN. Follow your checklist prior to turning or running engine! Lucky.
Make sure your new tank hose is angle cut on the end so it doesn't suck shut on the bottom of the tank
Round of applause for that starter.
Gy6 China engine's are usually some of the best. Most of the time any thing that goes wrong are carburetor, valve adjustment, c.d.i. or stator. Those are usually great machines when properly maintained. Thank you for another great video. 💯😊
Definitely not a performance unit but it looks like it could be a good rig for around the yard. No need for a trailer and it won't tear up the turf! Good work Joe!
looks like it would be perfect on the golf course too
the brakes may likely be hung up some, which wouldn't help lol
🐶Vinny would say "Looks a little rough rough." but if you know someone mechanically inclined who can use frame/foundation to build his own monster.
Love how you leave in the mistakes - I watch all your videos. Gives us all faith with our own projects.
Йж.хы
Love a good gy6 breakdown. Done this enough times on a kart I used to have it's muscle memory. Amazon has great cheap parts for every aspect of the engine & trans. The fact you had spark was amazing!
Joe you are my favorite youtuber of all time. You post more than most people. A ridiculous amount it's like every other day you got a new video. You don't go by the "RUclips algorithm" as they call it. Everyone knows what I'm talking about there. Thanks Joe for sticking with the people and being THE BEST RUclipsR your viewers could ask for
Home depot and Lowes have a package of pressure washer tips for about $12---15.00. it will cut your time by 50% . Get the $45 rotating tip and it will cut the time by 75% .
amazon has the rotating tips aka "turbo" tip also. Have to make sure you have the right one for your GPM rating and also have to start them facing at the ground.
You need to get a rotary nossal for cleaning the tuff stuff
I always get rid of old gas filters, because if they get crud in them it can shift around and shut off the gas flow at unpredictable times.
A lot better condition than that Kawasaki Mule you had a while back
You need to get a sonic cleaner to get a better clean up on carburetors.
When it comes too vehicles with a motor, if anyone can get them running it's you. Keep up the good work.
Get a wider spray nozzle
Gas left in that tank looks a lot like yellow paint, add some fresh gas and rinse.
Son your pressure washer is horrible! I love the channel but you have got to trade up to a heated water pressure washer.
Yeah I need to
@@2vintageyou just need a wider spray nozzle
A good steam genny is quite expensive.
@@mmaaddict78 I don’t think this guy is short of money ha
@@eddiestonerbud7188 for real he's spent 10k on machines in the last month and a half
Love the content Joe, ace!Also the amount u posting brother, its brilliant!👍🙏👊🦾🦾🦾
You got it cleaned up and runninng I like it! Not too bad now. Wax would really make it look good. Maybe you can order a fuel pump for it. It would be just fine around your yard.
Not bad joe cleaned up quite well should be sound when you get the parts to fix it properly take care mate 👍👌🔧🔧🔧
Sweet you got it up and running like usual. So when you going to finish with the Honda Odyssey fl 350 I want to see that thing going when you weld up the cage and what ever else you are going to do to it
Hey Bud that pump from the snowmobile should work unless its putting out ridicules pressure. Maybe the needle and seat are bad with pressure??? Love your vids, I'm a retired truck Mechanic and you have inspired me to start looking around for projects like what you are doing to keep me busy. Keep it up
Looks as tho that fuel filter may have been clogged as well. Great video!
We bought a Chinese 500cc 4wd UTV brand new & it was always hard to start, especially when the engine was cold?! It also had a diaphragm type fuel pump, in which i eliminated . I finally added an electric fuel pump with an adjustable fuel pressure regulator for an older VW bug/sand rail & it runs better than ever!! Just an idea for u… keep the videos coming!!
Nice little runner for a campground.
Man I hate to say it but im waiting for the day your screwdriver finds its way into your hand when youre taking bowl screws out. I hope im wrong haha. Try a 1/4 ratchet w a 1/4 socket and put your phillips tip into it for more leverage. Less likely to strip the heads that way. Great vid!
When you work on a side by side that is a generic brand it would be nice to know what engine it is and the cc’s of it like 250, 500, 750. Thanks for the videos, very informative.
great stuff, you need a remote fuel tank, looks like IV bottle with shut off valve and filter. will work on all your projects. keep fixing stuff, when we gonna see an old school jet ski?
Yo u need to get a green tip nozzle for ur pressure washer!!!! It’s a 25° fan, u cleaned that whole vehicle with a 0° nozzle? That’s crazy
Put your catch container on the floor and your old gas won't be trying to run back into the tank from your suction bulb!
Nothing that a little love and care won't overcome. In most cases anyways. Another great find and repair
The valves in the pump may not be working. Usually they use a diaphragm for valves but maybe the valves are in the intake and output. Could check by blowing in and sucking on the intake and exit for the pump. should only allow air to go in one direction.
wow...that old yerf dog runs good considering what it has been thru..im an old car nut and the old stuff is more basic but deff tougher and built with some quality
Great job into getting it running. Good yard tool just don't try to tow anything or haul heavy things. Like a small bag of leaves lol. God job on getting it going boss keep it till it drops all the way dead.
Your little sister teach you mechanics? Clean the exterior of a carb before tearing it apart! Then spray carb cleaner, and penetrating spray inside to start the parts loosening up, i.e. the needle! Also the spray will start loosening the varnish inside jets, threads, and passages😅
Joe never met a starter he didn’t hate😮
Did you check the air filter and oil before turning the engine over?
It's sealed so doesn't matter and it's not going to hurt it just rolling it over if there is no oil.
got a low tire on that Big Red
So I'm saying this as someone who hasn't actually watched the video yet. But I'm interested to see how bad it is. I still remember the Yamaha mule series. That was pretty bad.
Great Video. You showed us if it has good compression, proceed with repairs
Joe with that kind of horsepower comes a lot of responsibility, i feared for you lol.
why would you vacuum it lol just pressure wash it all out
Didn't want it all over the driveway
@@2vintage takes more time to get the vacuum than to just move it to place u can blast it out. surely you have a spot for that
your vids are awesome btw. much thanks
10:21
Hey Joe, do you sell much of your purchases?
Not a buyer but seems to be pretty full over there😀
Learning a lot from your channel, great work
From UK 🇬🇧
Noticed he didn't answer that lol.
That carburetor is nothing compared to some of the ones I've dealt with the last 2 weeks. One was full of corrosion and surprisingly i was able to get it running halfway decent
In rural Alaska we wait up to a month for parts!
Remember to always look at the exhaust side of the system too. No air out means no air in. The little critters like small places and we've seen that they have been around that thing.
Change the fuel filter! Has crap in it. Going to stress the pump
I would consider that a golf cart.
Of course it's got good compression when you crank it over for a week 🤦🏻♂️ For an ACCURATE compression reading you should crank it over three to five times and that's it. You seem to like to crank the shit out of your machines until you get the compression reading you want and that's not how to do it. I'm not trying to bust your balls I'm just trying to help you learn, and learning is always a good thing. I dig your videos thank you for sharing 👍🏻
what do you do with the bikes/ quads you fix?? like do you sell them??
Did you know that yerf dog backwards is Godfrey..... they are a local family here in Utah that started this brand.
I don't know if you have one or not, but I would highly recommend an ultrasonic cleaner. If not for the carbs alone.
I was always spraying carbs out with carb spray before i got mine
I rebuilt around 30 riding mowers… I promise I’m not giving you bad advice on the pressure washer .. and shaker can paint is super cheap … gloss black makes even the worst frames and so on look new seriously.. your resale value or ability to launch stuff for more money will be way easier.. not to mention it belongs to you until it doesn’t so to me it’s nice to nice things .. don’t you think..
If it's a first Gen Mule, get er running, send it down the road. Not very good machines IMO. But if it's in decent shape it'll be alright a while, just real cramped in cockpit. Enjoy! Great vid as usual, were watching you this morning.
You need to use a green or yellow tip on your pressure washer.. lol
Use some of that super clean from Walmart on those nasty carbs and it'll clean that old greenish residue right out. Discovered that a while back.
A great philosopher once said, "Know when to walk away, and know when to run." Thank you for another great video, always a learning moment
Great project, should be 3-4 videos for restoration. Someone needs to open a small engine repair shop
The one thing is you seem to be not checking the oil before starting it. Unless I missed it.
He checks the oil all the time lol what are you talking about.he doesn't need to show it every video lol.
Why do you worry so much about the headlights
Same reason you worry about why he does do it because he wants to
I had one of those I beat it to death always started right up.ended up giving it to my parents they use it every day. All I ever did was put a new clutch on it and a 20 dollar replacement carb
Lol I always have to mute the volume when the bowl comes off the carb, I know the scraping screwdriver is coming. Nails on a chalkboard 😖.
Your fuel pump probably looks about like the carb on the inside, may need cleaned too!
We want to see the boat
was just watching the raptor 350 lol
Joe, I hope you sell some of those atvs. I don't want too see you on that TV show hoarders
Man, I was thinking, if the machine had been under water, water would've found it's way inside the crank case & valve cover via the vents where it would displace the oil (float the oil out). The stator was probably bathed in water too. Was surprised to see that fat blue spark.
I'm gonna be honest with you, I spent so many years trying to clean carburetors and fighting with old pumps etc. But now I just spend 30 bucks on Amazon and get a new carburetor which 95% of the time comes with a matching pump. People can talk all the shit they want but I've not had 1 issue with a Amazon carburetor I even have one on my 04 Harley and it runs perfectly.
Hey harbor freight electric pressure washer isn't that bad .. it got it clean
My Ranger 500 4x4 says “hold my beer”.
My $600 Ranger 500 4x4.
Often to help start such vehicles I blow into the gas tank to pressurize it, forcing gas into carb bowl. Just do not inhale.
I enjoying your vlogs i watch your videos and gives me motivation to fix all my toys 😊
This was a really good vid Joe, that would definitely make a great machine for someone, but MAN it's hard to get past that Big Red video 🤤
home depot used to sell something similar about 10yrs ago think it was about 2800
Didn't get why you didn't just use the dump box and sweep it out instead of vacuum it!
Joe, do you still use the ultrasonic cleaner? If so, how do you determine when to use it or not. I was just wondering. I have one now and was wanting advice on temp setting and solution to use. Great work! Love seeing ya getting these tired units up and running again!
I set mine at 60 and I use dawn dish soap and water in it. I use mine whenever i clean a carburetor and does pretty good
Nice flip. Probably make more money off of this one project than the three cost total. Plenty of profit without much effort. Nice flip indeed.
Yikes with how nasty it is in that carb, I wonder - the old saying a little bit of heat goes a LONG way, if a little tickle of heat would help with not only those really stuck screws on the bowl but the jets as well!
Well done joe another great video
Not letting Vinnie out to chase you when you are driving outside
If u turn the key faster it will turn over faster
Great video, cool little machine, I wouldn’t mind having one for the yard lol
Hey. Really like your videos. For a better way to wash a bike like that you should get yourself some auto valet premium purple power. You just spray it on and spray it off. It comes off right away.
Pressure washer is painful
You should give the hoover a bonus on this one. It put in a shift! lol
I never knew if you left a engine sitting the old fuel would turn into that black gunk crap. Does diesel do this too if left just sitting for a long time? 👍🏴
Good job, what was the brand again and engine? Another resurrection by you,awesome job 👏 👌
Bet you can use a yamaha outboard fuel pump. Yamaha 40 or 115 same pump. 1996 model.
Hey man I need some help I need a vacuum diagram of this exact go-kart utv Please
That fuel tank looks pretty rusty
Forgot to change oil
Sounds decent for such an old machine.
Probably worth a pretty penny, rare sxs. Yerf Dog didn't make a lot of them, thats a 1st generation I believe.
Yerf Dog side by, wow, go cart makers. Hope it works for ya. Those were kinda junk from start to finish. Good luck, bud!
You need bigger presure washer
Just take the manifold loose from the head will be much easier and really easier to replace!
Nice around the house yard machine. Take it ice fishing with all the gear rt in back..b safe.peace
Your not going to take that ice fishing 😅😅. It's only 2 wheel drive.
Get self tapping sheet metal screws and tighten up all the rattles.. lol
Those chinese gy6 engines and parts they used are plentiful and cheap which is good sense that division of yerfdog went under almost 20 years ago