Not all heros wear capes. Bought my 22zx10r, hated the diaper in the back. Woke up next morning saw this. Took me 30 min of work since u figured it all out for me.. I stuck pieces of foam in between the bike and the bracket incase of rubbing. Ordered my tst parts. But this is gonna save me a week of riding with a stupid looking plate.
Pretty confident in any state, you’re giving them a reason to pull you over for that setup. If you have that nice of a bike, you just to get a fender illuminator. But I give an A+ for creativity. It's always great to have friends with tools.
I bet he had the same problem that I had when I bought my BMW S1000RR 2020. It was a good 6 to 8 months before someone had a real fender eliminator kit. NRC was the only real option for along time! IT WAS HELL WAITING FOR THE PARTS I WANTED TO BE RELEASED!
@@MRR-qv3bw Oh yeah, good call I didn’t even think about that and especially now after all the Covid shut downs getting shit released and made it’s probably even worse. By the way, if that X 14 helmet in your biopic is yours, that thing is badass, bro. That’s the next helmet I want to get.
The metal piece that holds down the seat is installed upside down, but I guess it still works that way....lol. I have a 2021 Zx10 also. I wish Kawi came up with a better way with the seat removal....
A+ for the innovation... But tst makes it for 60 bux, high, low, and adjustable, biggest thing is the block off portion which hides those screw holes and makes it so much cleaner, and they also got the integrated tail light for 110 bux which is clutch.
Nice video. I just got a new exhaust for my 2022 zx10r, do you have any videos on how to remove the cat? I have a ninja 400 before and was much easier to install a slip-on exhaust.
The long screw at 2:13 that was taken from the middle section of the side panel was placed on the front end of the panel at 6:07. Hope the vibrations don't cause that shirt screw to pop out of that middle section bro. I pay attention to the small details when I work on things haha. Blame the US NAVY I guess 🤷🏿♂️. But on a side note I just picked up my 2021 zx10r today. 💪🏾
I swear I just bought this same motorcycle from a dealer here in Utah. It has that same plate bracket on it and everything. Did your friend sell or trade it in somewhere?
The removed signals? At the time of this video. There was no integrated taillight or tidy tail available. The bike has sense gotten an integrated taillight
The Gen 5 taillight looks like it will fit too. He was on the fence about ordering an integrated 5th gen taillight and seeing if it would fit. But decided he didn't want to waste the money
you all probably dont care but does anybody know a tool to log back into an Instagram account..? I was stupid lost the password. I would appreciate any assistance you can offer me.
@Lucian Kendrick Thanks for your reply. I got to the site through google and Im in the hacking process now. Seems to take a while so I will get back to you later with my results.
On my 21 zx6r you put your key in on the back of the bike to unlock the front seat and it just comes off, then the back seat is released by a little pull cord under the front seat
@@motorich Kawasaki send some same colours and different colours to the USA and Europe but here in the UK Kawasaki aren't offering the gloss black that you get in America😭
@@motorich good to hear. It will look super badass with the right bits on. To be honest I would have done what you did as soon as receiving the bike cos those big old plastic bits are made for the bin
Not all heros wear capes.
Bought my 22zx10r, hated the diaper in the back. Woke up next morning saw this. Took me 30 min of work since u figured it all out for me.. I stuck pieces of foam in between the bike and the bracket incase of rubbing. Ordered my tst parts. But this is gonna save me a week of riding with a stupid looking plate.
Looks clean and flush, nice bike!
Cops will hate on the plate mount
Cops around here hate bikes in general. So... why make it easy on them.
Pretty confident in any state, you’re giving them a reason to pull you over for that setup. If you have that nice of a bike, you just to get a fender illuminator. But I give an A+ for creativity. It's always great to have friends with tools.
I bet he had the same problem that I had when I bought my BMW S1000RR 2020. It was a good 6 to 8 months before someone had a real fender eliminator kit. NRC was the only real option for along time! IT WAS HELL WAITING FOR THE PARTS I WANTED TO BE RELEASED!
@@MRR-qv3bw Oh yeah, good call I didn’t even think about that and especially now after all the Covid shut downs getting shit released and made it’s probably even worse. By the way, if that X 14 helmet in your biopic is yours, that thing is badass, bro. That’s the next helmet I want to get.
Don’t know why but I fucking love the look of this bike
you are not the popular opinon. lol
because it’s fucking awesome, have one myself, love it!!
Admire your patience. I would have snapped most of those bits.
The metal piece that holds down the seat is installed upside down, but I guess it still works that way....lol.
I have a 2021 Zx10 also. I wish Kawi came up with a better way with the seat removal....
A+ for the innovation... But tst makes it for 60 bux, high, low, and adjustable, biggest thing is the block off portion which hides those screw holes and makes it so much cleaner, and they also got the integrated tail light for 110 bux which is clutch.
this was when the bike was released and there wasn't anything for it at the time
Ouch. Hate it when ppl smack screws back in like that with power tools. I'm sure none of those are stripped or cross threaded.
Lowest setting. For plastics and such. I can stop it with my hand.
I always start them by hand at least 1 turn. Looking for an issue like this.
Nice video.
I just got a new exhaust for my 2022 zx10r, do you have any videos on how to remove the cat? I have a ninja 400 before and was much easier to install a slip-on exhaust.
Unfortunately I have not had a 22 ZX10 come through for an exhaust just yet.
The long screw at 2:13 that was taken from the middle section of the side panel was placed on the front end of the panel at 6:07. Hope the vibrations don't cause that shirt screw to pop out of that middle section bro. I pay attention to the small details when I work on things haha. Blame the US NAVY I guess 🤷🏿♂️. But on a side note I just picked up my 2021 zx10r today. 💪🏾
I noticed that too. Also, the little short screw was supposed to go to the front instead of the rear.
I swear I just bought this same motorcycle from a dealer here in Utah. It has that same plate bracket on it and everything. Did your friend sell or trade it in somewhere?
Nope, he still has his in Cali. Highly modded now
@@motorich ah. My bike is literally the same color and everything so I was like whoa, did I buy it.
Where are the signals ?
I will be installing an integrated taillight once. It comes out for the bike.
we should put the indicators and licence plate on the rear mudguard, instead of hiding it
Have you had any problem throwing code's when u did the turn signal delete
I haven't heard anything like that from the owner
@@motorich ok thank you
So you just going to turn without turning signals?
In our state it is not required. You can use hand signals
would've been nice for my baby ninja 400 ... p.s. you have an amazing machine 😎 congrats!
Wish I could say its mine.
Wonder if it threw a code light?
no code lights
Man that's a lot of work. But I'm sure you are Happy. I had to do a lot of work for my custom rear end
No signal lights ???
Do the turn signals work after that
The removed signals? At the time of this video. There was no integrated taillight or tidy tail available. The bike has sense gotten an integrated taillight
@@motorich can u post how u put new tail and lights on please thanks
Absolutely beautiful 😍, kawasaki zx10 2021
Buys a 16 thousand dollar bike and won’t spend 100 dollars on a good fender eliminator.. lol..
Or there isn't anything out for the bike just yet. ;-)
I’d be willing to bet the gen 5 fender eliminators fit it... tail looks the same lol
You bet the $100 fender eliminator? Seems like a lot of money to waste if it doesn't
The Gen 5 taillight looks like it will fit too. He was on the fence about ordering an integrated 5th gen taillight and seeing if it would fit. But decided he didn't want to waste the money
@@motorich lemme just go measure my gen 5 right now and tell you the gaps and such
I’m pretty sure that’s illegal, no one can’t see your plate and cops are going to mess you up cus of this...
Around this area they mess with us anyways
ruclips.net/video/AdTJmel8K1o/видео.html
Check this video then
why do you want someone to see your plate? society is lucky the damn plate is on their in the first place
Obviously your not a bike rider
Link for the kit please?
Pretty crafty to make this work 👍, however one thing to say "NRC tail tidy" FTW! 🔥
Just don't ride at night now without a license plate light.. 😆
Any error Show up on tft screen after this ?
None that I have been made aware of
Can you tell me what todo about my break light being stuck on now
Watching this makes me like the 2020 even better. You don't have to take off nearly as much to take the tail off. The rear is just one piece
you all probably dont care but does anybody know a tool to log back into an Instagram account..?
I was stupid lost the password. I would appreciate any assistance you can offer me.
@Quinton Ayaan instablaster =)
@Lucian Kendrick Thanks for your reply. I got to the site through google and Im in the hacking process now.
Seems to take a while so I will get back to you later with my results.
@Lucian Kendrick It worked and I actually got access to my account again. I am so happy:D
Thank you so much you really help me out!
@Quinton Ayaan glad I could help :)
dude, check out mustard tidy tails, they are the best imho
The owner of the bike is waiting for something that he likes to surface. This was just to get him by as he was going to ride without a tag at all.
Wow. The way the seat is held in is cumbersome AF. 🤦♂️
Yea. Its not the best design. I am not sure what Kawi was thinking there
On my 21 zx6r you put your key in on the back of the bike to unlock the front seat and it just comes off, then the back seat is released by a little pull cord under the front seat
Gloss black the best colour and we don't get that colour in the UK!😫🤦♂️
Really? Whats the reason you don't get the color?
@@motorich Kawasaki send some same colours and different colours to the USA and Europe but here in the UK Kawasaki aren't offering the gloss black that you get in America😭
I got matte black last month in India
👍
No!!! Needs to look trick! not TRASH! On a brand new 2021 bike too😲😂 Most def illegal which ever way you want to dress it👎🏻
When something comes out specifically for the bike. It will be installed along with an integrated taillight
@@motorich good to hear. It will look super badass with the right bits on. To be honest I would have done what you did as soon as receiving the bike cos those big old plastic bits are made for the bin
This bike is soo sick... It looks like the terminator
Because it will terminate all comers
Does this void the warranty?
I thought u just used a hacksaw? I’ve been doing it wrong this whole time 😂
No signals and no license plate light??? Seriously??
OK hay
Nice ticket magnet
Nice bick
Buy a fender eliminator, won't be following this example
He plans to. But wanted the fender gone the day he got it. So... I made something for him. And still stand by it looks better than stock
Looking forward to the next steps
ruclips.net/video/AdTJmel8K1o/видео.html
$17k bike and can't afford fender eliminator?
He asked me to remove it. I made the temp tag holder by choice. Fender delete, integrated taillight, and full exhaust are on the way.
Seriously, this bike just got launched...
Do you really think there is a warehouse full of aftermarket spares , just waiting?!
What the fuck thats a pain in the ass compared to my 2019 ...newer isn't always better
Bush mechanic 🤣
What people don't realize is THIS is why cops want to pull you over. Having a plate angled upward like that is as bad as not having any plate at all.
Yes and no. But thats what he wanted
Que cochinada de arreglo, no saben lo que es un defender 🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️
Just buy the kit .. looks like shit
🤮