Oh, that signature Kawasaki all green reminds me of a story book I read in grade school;it was called 'The Wizard of Oz and the Emerald City'.. everything was green. Good job man.
I've been watching your videos nonstop since I found them a couple days ago. Man you went THROUGH it on that BMW. I admire your persistentence and attitude. My yamaha 1992 TDM850 has a charging issue and your videos are inspiring
Coming along great. Sounds fantastic. As for your question, remember as the oil heats up it looses some of its viscosity hence less or no drag on the drive train.
@cj media the wheel spinning at the beginning is bc your clutch adjustment is to tight . Once the bike warms up the clutch warms up and loosens a bit. That’s why you don’t make clutch adjustments until bike is fully warmed up.
Really starting to like the green and black combo, it brings the old school vibes of Kawasaki. U did phenomenal on rebuilding this bike and others, Support & Love all the way from Malaysia! Keep it up!
This is sooo wonderfull...I have my kawa naked now, waiting for track Fairings and you helped me a lot to dismount my bike watching your videos. There is a frontal screw on the upper side fairing that I haven't seen you to use It. Did you, CJ? Absolutely shocked for your superb work!!
For your question about the wheel stopping spinning when getting the engine up to operating temperature, it is because the engine oil thickness is what spins the wheel due to the gears being so close to each other in neutral. When that oil heats up, it becomes thinner which will not spin the wheel as easily.
Awesome as always man!!! Love every video!!! Love from India♥ Just a suggestion...upload whole build time lapse also...even that type of videos are fun to watch♥
I think the reason why the wheel wasn't spinning anymore is because of the oil that got hot and more liquid✌️ However great rebuild like every other machine👍👌 Love the Sound🫡♥️
"I know, I shoulda got green, but I already started putting blue in it....." 😆😂🤣 The bike is already a beast. The BrenTuning flash is gonna be insane! That bike is looking soooooo nice! Amazing work getting it to this point. Thanks for sharing all great content! Keep yourself safe! 😃👍❤🏍 Randy
I really really love the looks of this bike rear, side, and front is just perfect 💚 keep it up brother love seeing this beast running again love from Philippines 🇵🇭
Amazing video! You could've installed a radiator guard before assembling the fairings but all can be done next time tho. Can't wait to see it rip the streets!
That engine light will need to be deleted. It just won't turn off by itself there is a attachment that connects to a plug under the seat that you can hook up an OBD2 scanner to in order to delete it once everything's reconnected. The attachment is separate though you can order it on eBay
Dude, I’ve just watched you struggle a bit with those coolant hoses, get yourself a spray silicone lube, helps massively and won’t rot the rubber pipes.
Cool Bro.... There's only a little bit that sticks out in the eyes on the ZX10R (2021) in the lamp shell there is a twilight light, try removing that... greetings from Indonesia Bro
The wheel stop spinning at neutral when the oil gets the right temperature and enters in the channels lubing all the gears, then they stop getting 'drag' by neutral...
Hi chris, Hope you are doing good ! I would like to suggest you that as your videos come after a big gap so If you add a short recap of previous video then that will help a lot to recollect waht we saw in last video.. Thanks and lots of oove from India ❤️❤️💯
Hey pancho! Simply learn just by doing! Pick something up and figure it out. The system teaches you that you have to study something before you do it but in all honesty you can figure it out! You got this!
@@CJMediaOfficialthx I’ll keep that in mind ig I was asking cus I know little to almost nothing about mechanics I just don’t know where to start but thx I’ll looks into it and also I admire how you always put a verse at the end of your vids I’m a Christian and I love to see that thx for that to keep doing what your doing ❤
Father in heaven, how we love you. We lift your Name in all the earth. May your kingdom, be established in our praises, As your people declare your mighty works. Blessed be the Lord God Almighty you are 👍
Blue liquid in green bike! Bang-bang!!!)))
🤣🤣🤣🚨🚨🚨🚨🚨👮♂️👮♂️👮♂️👮♂️👮♂️🚓🚓🚓🚓🚓take me away ☠️🤣
Wow! I’m the best! In Your opinion) Unbelievable!
Cj it got really addictive mate! i follow you since ur first bike build. now i cant wait till the next episode. we need two per week
🤣 thank you lices! I got a special one upcoming for you!
Lots Of Love From Bangalore India❤🔥
🙌
Bro niv yen illi
❤❤❤ elli nodiru Bangalore boys
Greetings guys😁😁
@@Harshacaptain irle beku
Oh, that signature Kawasaki all green reminds me of a story book I read in grade school;it was called 'The Wizard of Oz and the Emerald City'.. everything was green. Good job man.
I've been watching your videos nonstop since I found them a couple days ago. Man you went THROUGH it on that BMW. I admire your persistentence and attitude. My yamaha 1992 TDM850 has a charging issue and your videos are inspiring
Coming along great. Sounds fantastic. As for your question, remember as the oil heats up it looses some of its viscosity hence less or no drag on the drive train.
You're right Maurice! Thank you! Cheers
that green looks so good in that bike, nice to see it coming together
@cj media the wheel spinning at the beginning is bc your clutch adjustment is to tight . Once the bike warms up the clutch warms up and loosens a bit. That’s why you don’t make clutch adjustments until bike is fully warmed up.
Really starting to like the green and black combo, it brings the old school vibes of Kawasaki. U did phenomenal on rebuilding this bike and others, Support & Love all the way from Malaysia! Keep it up!
Greetings nazrul! You and me both! I love the color combo! Thank you for the support!
This is sooo wonderfull...I have my kawa naked now, waiting for track Fairings and you helped me a lot to dismount my bike watching your videos.
There is a frontal screw on the upper side fairing that I haven't seen you to use It. Did you, CJ?
Absolutely shocked for your superb work!!
bro... you really are inspiring my guy! thanks for the great energy always
For your question about the wheel stopping spinning when getting the engine up to operating temperature, it is because the engine oil thickness is what spins the wheel due to the gears being so close to each other in neutral. When that oil heats up, it becomes thinner which will not spin the wheel as easily.
Another 🔥 video as always. Thanks for taking us along the rebuild bro!!
My pleasure kells! Cheers
looking good those new faring's are clean. that green is dope..shes coming along nicely. and sounds awesome. looking forward to seeing it on the road.
You and me both gabe 😁😁😁 cheers dude
@@CJMediaOfficial 👍
Awesome as always man!!! Love every video!!! Love from India♥
Just a suggestion...upload whole build time lapse also...even that type of videos are fun to watch♥
That green and black color combination is fireee!! 🔥🔥as always, waiting for the next parts of your vlog!
I think the reason why the wheel wasn't spinning anymore is because of the oil that got hot and more liquid✌️
However great rebuild like every other machine👍👌
Love the Sound🫡♥️
very interesting Chris! Probably due to the change in viscosity, cheers friend
Man this bike is becoming much beautiful every episode😍.Keep Going CJ👍👍
That exhaust sounds so sweet 👍gives you goosebumps thinking about the noise it's going to make once you hit the highway
Really needs that tune though, can tell its running lean as no pops or bangs.
Perfect work, but a question did you broke off the cabelholder, above the cooler? Because i look like its broke off fresh
I'm a not big fan of kawasaki, but in your hand this bike almost insane bro when finish!
She is almost done, good work CJ!!
Que bonito ver toda la reparación, buen trabajo.
Man I’ve been addicted to your videos love the content 🔥🔥
"I know, I shoulda got green, but I already started putting blue in it....." 😆😂🤣
The bike is already a beast. The BrenTuning flash is gonna be insane!
That bike is looking soooooo nice! Amazing work getting it to this point.
Thanks for sharing all great content!
Keep yourself safe! 😃👍❤🏍
Randy
Wow. That thing looks insane. Awesome work ❤🔥🔥
Cheers khwmta!
I really really love the looks of this bike rear, side, and front is just perfect 💚 keep it up brother love seeing this beast running again love from Philippines 🇵🇭
You and me both bro! Cheers and greetings to you in the Philippines
wow, good job bro, im always waitting your project zx10
Absolutely stunning 💚 CJ sounds awesome too!!
Thank you Adam! #greenteam!
@@CJMediaOfficial no worries dude 👍🏻 absolutely loving your youtube channel been binge watching loads of it the last week such a genuine cool kid 👌🏻
CJ, all the hard work is paying off, looking great
Amazing video! You could've installed a radiator guard before assembling the fairings but all can be done next time tho. Can't wait to see it rip the streets!
That engine light will need to be deleted. It just won't turn off by itself there is a attachment that connects to a plug under the seat that you can hook up an OBD2 scanner to in order to delete it once everything's reconnected. The attachment is separate though you can order it on eBay
Shhheeesh indeed fantastic bike fantastic collection , lovely sound🙌🙌
Garage Goals🔥🔥 🔥🙌
Dude, I’ve just watched you struggle a bit with those coolant hoses, get yourself a spray silicone lube, helps massively and won’t rot the rubber pipes.
Rear wheel spins since the oil is cool and dragging on the clutch plates once it gets warmer it stops dragging
Exactly right Emil! Thank you
Wow ZX10R is finally Rebuild CJ bro
The green is just amazing 😍😍😍 I love it
Always ready to watch some cj contents.. M
Been waiting for this 🔥🔥
Cool Bro.... There's only a little bit that sticks out in the eyes on the ZX10R (2021) in the lamp shell there is a twilight light, try removing that... greetings from Indonesia Bro
The viscosity of the oil is higher when cold, thus causing friction between the clutch plates. This is why the wheel rotates in neutral when cold
You're right Shane! I didn't know thanks!
Great work, love it, best of luck
The wheel stop spinning at neutral when the oil gets the right temperature and enters in the channels lubing all the gears, then they stop getting 'drag' by neutral...
watching all the way from Philippines
U got great energy keep it up brother
I will be touring Wisconsin this summer hopefully I can stop by your shop love your videos!
Looking sick CJ !! Drive safe
i like your videos so much, its make me always to waiting for the next video.
Lots of love from Delhi ❤️
God bless you and the family CJ👍🏾
Thank you Brian! He has abundantly, likewise
All the best from Germany 💯💯
Greetings pat!
i'm hoping you going to use the same mirrors as the bmw, those will look sick to on this bike, looking forward to you're next build
Let’s Gooo!! Keep up the great work 🦾🦾
Beautiful kawasaki green🤩
Hi chris, Hope you are doing good ! I would like to suggest you that as your videos come after a big gap so If you add a short recap of previous video then that will help a lot to recollect waht we saw in last video.. Thanks and lots of oove from India ❤️❤️💯
Parabéns👏 CJ. Beautiful motorcycle. Always here waiting for your videos. Hugs.🇧🇷👍🏻
All the way from PH 🇵🇭
Way to go CJ! Cant wait whats with the fork and front tire. Hope not a big issue
wow,, i always amazed, i'll wait to the next video part10, thanks...
Nice video. I guess you broke the cable holder. Is that correct? Will you replace it once more or just leave it like it is?
Awesome rebuild
fantastic work , love the videos
Greetings from Philippines. As always keep it up. Brother
Greetings Dennis! Cheers
Hey what tool do you use to remove the push rivets that hold some of the fairings in place?
Getting there, nice work 👍👍👍👍👍
Top notch work man. Who sells the license plate LED surround? Like that one, not too bright.
Lots of love from Bihar India ♥️♥️🏍️
Niceee work!! Any idea how to remove that dB killer from the exhaust?
Hi CJ, awsome job on an awsome bike...congrats man!
Hey Ricardo! Thank you very much!
Love from Hyderabad India ❤️
A moto ficou nova com um akrapovi! Muito forte o ronco do motor!
Man u r awesome👍 much much luv from india keep doin what u doin .May God bless u n your family😇🙏🙏
Not me but God is awesome!! Thanks dude cheers
@@CJMediaOfficial Amen🙏
Great work Bro !!!
hooked to your content man, keep up the good work my G! Btw would love to see you restore a MV Augusta F3 or Benelli TNT 600i in future
Love your videos greetings from germany 🇩🇪
Can i ask you some something ?? why majority of your rebuild bike use long exhaust?? Not like your bmw use short exhaust it look more aggressive to me
Looking/sounding good CJ !
Love from Japan❤️🔥❤️🔥
I love Japan bro🥲🖤from India
Looking forward for ducati V4S ♥️♥️♥️
Where you get them fairings from? I love that look.
The Hulk green very Nice. You are pro. Well.done.
Love from (SIKKIM)INDIA 🇮🇳
Like before watching coz we guaranteed excellent content 🔥🔥
Kawasaki ninja h2 waiting💯🔥
What you gonna do with all these beautiful bikes matey? Which one you keeping?
In your last video of this bike your front brake discs and your front wheel were wobbling ... did you solved this problem?
Looking good CJ almost there wonder whats next .?
Lots of love 💕💕 from india Kashmir ❤️ bro
Who makes the trick surround for the rear number plate?
Watching here from philipines😊
The next one gotta be a ducati mannn ❤
Hey I really like what you do and I would like to learn this but idk where to start or where can I study this
Hey pancho! Simply learn just by doing! Pick something up and figure it out. The system teaches you that you have to study something before you do it but in all honesty you can figure it out! You got this!
@@CJMediaOfficialthx I’ll keep that in mind ig I was asking cus I know little to almost nothing about mechanics I just don’t know where to start but thx I’ll looks into it and also I admire how you always put a verse at the end of your vids I’m a Christian and I love to see that thx for that to keep doing what your doing ❤
Walaweh ❗✌🏻
Champion 🏆
🏆
Love from Kerala india🇮🇳
Father in heaven, how we love you.
We lift your Name in all the earth.
May your kingdom, be established in our praises,
As your people declare your mighty works.
Blessed be the Lord God Almighty you are 👍
Amen!
Awesome work mate....👍🔥
Nice Dude
Looking good!
Que bonita q esta quedando saludos desde Colombia