THANK YOU!! Wow, I've watched 20 or more videos in two days and became exhausted by all the words I had to Google!! 🤣 Thanks for the EXTREMELY simple and helpful content!! 👏👍
Can you do a video about wiring subwoofers in series parallel but show the entire process. Like wiring them to the box and then running the wires from the box to the mono amp. Thank you!
Maybe you can answer this. I want to replace the sub in my new RAV4 Prime with JBL. Already replaced all the speakers in the doors and on the dash. I am using factory amp because it is not so bad. The OEM speakers are bad though. I want to replace the sub because it is made out of paper, has very small magnet and produces a lot of distortion and booming. I want a tight sound but not necessary low. I was told that I have to wire my existing factory amp to a dual coil sub with no more than 75w RMS or wire it so it is 8ohm. The reason for it is so I would not blow the factory amp. Is that true? Thank you.
So how do I do this without using a jumper wire? Basically the two wires won't fit into my terminal. So I'm trying to figure out how to connect the wires outside of the terminals on the subwoofer..
OK I HAVE 8 4-OHM SVC WIRDE TO A 2-OHM LOAD AND THATs 2,000 WATTS BUT I'M Trying to GET TO 3000 WATTS 1-ohm load, so I'm trying to see if I can just add to more 4-ohm svc subs or more to get to a 3000 WATTS 1-ohm load. what do you think is this possible.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
By far the best description of how to wire and get your ohm load.
This was extremely helpful and exactly what I was looking for when I was looking for it.
THANK YOU!! Wow, I've watched 20 or more videos in two days and became exhausted by all the words I had to Google!! 🤣 Thanks for the EXTREMELY simple and helpful content!! 👏👍
been looking for a vid like this and this is the best yet THANK YOU !!!!
Thankyou
Can you do a video of hooking up 2 subs to a mono amp? I read about it being done but they never explain how. Thanks Cody
Stay tuned!
My klipsch r 12sw blew on me. Can I replace the 8omh subwoofer for a DVC 4 omh wired in series? This is for home audio
What will happen you connect 2 channel amp to a double voice coil speaker? I mean 1ch per 1 voice coil🤔
Can you do a video about wiring subwoofers in series parallel but show the entire process. Like wiring them to the box and then running the wires from the box to the mono amp. Thank you!
Can I connect a dual 15" coil speaker with a 10" in speaker?and how should I connect it?
Maybe you can answer this. I want to replace the sub in my new RAV4 Prime with JBL. Already replaced all the speakers in the doors and on the dash. I am using factory amp because it is not so bad. The OEM speakers are bad though. I want to replace the sub because it is made out of paper, has very small magnet and produces a lot of distortion and booming. I want a tight sound but not necessary low. I was told that I have to wire my existing factory amp to a dual coil sub with no more than 75w RMS or wire it so it is 8ohm. The reason for it is so I would not blow the factory amp. Is that true? Thank you.
So how do I do this without using a jumper wire? Basically the two wires won't fit into my terminal. So I'm trying to figure out how to connect the wires outside of the terminals on the subwoofer..
After you wire the dual 4 ohm to parallel 2 ohm how to you loud that into the amp ?
Load*
Bring back the subwoofer olympics
i need to wire 1 dule voice coil 2 ohm to my dule voice coil 4ohm in to my monoblock 2 channel amp how would i do it
OK I HAVE 8 4-OHM SVC WIRDE TO A 2-OHM LOAD AND THATs 2,000 WATTS BUT I'M Trying to GET TO 3000 WATTS 1-ohm load, so I'm trying to see if I can just add to more 4-ohm svc subs or more to get to a 3000 WATTS 1-ohm load. what do you think is this possible.
“And do not mix the truth with falsehood or conceal the truth while you know [it].” (Holy Quran 2::42)
Shut up.
@@ricardomolina4605 why?
I got one 2 ohm dual coil sub and want to wire both coils to remain 2ohm not 4ohm and not 1 ohm… how would I do that?
Buy another 2ohm dual voice coil subwoofer.
Then wire them both together parallel I think
Just wire it to 4 ohms. If both voice coils are powered and your not losing that many watts there’s not rlly an issue.