Это видео недоступно.
Сожалеем об этом.
TOURAN SEATS IN A CADDY? THIS IS HOW TO! - Part 1
HTML-код
- Опубликовано: 28 окт 2023
- In this video we install a set of toucan seats into Kenan's VW Caddy!
Subscribe and tune in to what’s up next for the MX5, we’ve got a major project going to be released soon
Follow us on other social media platforms;
@KMBuilds
www.tiktok.com/KMBuildsyt
K.M.Builds
Ken
www.tiktok.com/@Kenanholmes7
Kenanholmes7
Matt
www.tiktok.com/@MattDurman
MattDurman
great video. have decided on a caddy in the next month or so. torn between the 2.0 diesel and the 1.4 tsi but leaning more towards the tsi.
the plan is to get this conversion done but with a bulkhead behind the rear seats.
will also be using for work and need the rear to be ventilated.
thoughts?
is it possible to get all the needed touran bits nw from vw?
also, are you not worried about the hard lines in the centre getting crushed?
Hi do you need to mot after to have it Road legal ? Thanks
No I don’t think it means you have to have a fresh MOT just for doing this. As long as it passes the next MOT you should be fine. You definitely do have to notify your insurance of the change though. Hopefully this helps! 🤞🏻
Did you use a spot weld drill bit? If so what size
Hi Casey, I used a normal drill for it all. Most of the spot welds I ended up riveting so I needed to drill straight through anyway. Just be carefully not to poke through too far with the drill to not hit things such as the fuel tank. Areas that were not being riveted I just took my time to ensure I did not drill through the metal behind the panel I was removing. Hopefully this helps! 🤞🏻
Just got my panel out & I’m ready to cut the front of the side panel to fit. What did you do with the 3 tank bolts? Cheers
Hi Casey, probably best to message us on Instagram be easier for us to guide you through the process and answer questions
Hi mate what size rivets did you use?
I believe they were 5/6mm rivets. The bigger the better ideally!
@@KMBuilds thx did you use any panel bond
@@Haydzx-tn3gy yes we did, as much as possible on all contact areas. That’s one part I believe was missed out of the video unfortunately
@@KMBuilds do you remember what stuff you used I’m gonna do mine this weekend
Tiger seal or any strong bond should be okay!