I'd be lying if I didn't say that I was expecting bigger numbers, but it's still pretty quick for what it is. You'll probably need a wheelie bar if you do get more power down! 👍
Can you use wheels of a larger diameter? I have used the wheels from my FEIYUE FY08 on both my 124018 and 124019 which made them do the 60km/h that it is on their boxes instead of only 50km/h. So I have been buying all kinds of wheels that have a 12mm hex which will arrive soon and only one larger set have been just a little faster without any gearing changes so far. One bonus is a bit more ground clearance for grassy surfaces and are faster than the stock ones are on road.
I used to own the full size, not that they are that big. A Honda Acty. Brilliant vehicle, like many of my vehicles including a Mini Pickup I wish I had kept it. But just got a D12 and starting to mod it to the max!
I think the fact you got it to do a wheelie makes up for a slightly slower top end. If you could find some taller foam tires you might get more top end out of it without changing the gears.
G'day mate. Hows things? I tried drifting one of these stock out of the box on a bitumen road and burnt the motor out within 15 minutes. They are a great truck and I really love them but DO NOT drift them on bitumen with stock tyers.
If you need anything 3D printed for the truck, let me know. FOC of course. Unless you already have a 3DP. Here's a link to a few Thangs 3D printed designs. thangs.com/wordreet I have printed a lot of stuff off Thingiverse too and have other stuff I've designed on Tinkercad.
need 0.5 modulus 9t brass pinion, to omit the 1st counter gear hitting 2nd one. its about 40% more wheel speed. edit: it'd hit 29 mph anyway doing that.
its a little rough to make the new larger pinion fully mesh to the 2nd gear in line, rules said standard gearbox, didn't say EVERY gear has to be in it. same setup is in my D12 with a 280 motor, works better for drifting.
You can better than bro,,I have faith in ye,lol 40 mph bro,,,that's a big motor,,why so slow,,thinks you have pimp up gears ,bro,,40 mph,,you got this bro,,lol👍
As always great content! Got me looking into that d12 now too. Hahah. How's parts availability? Also what is that orange truck up on your shelves with the orange rims? Looks badass! 💯👊🏻✌🏻
Little nipper no one 1/5th scale Petrol RC yet tomliy check rovan Baja 29to 45cc they are fast and Powerful 40+mph better than nitro Easter to maintain and they are a good price 👍
I have to confess I hate the real trucks! But that maybe down to a person I dislike who always has one. So let me just say, you need more crap in the back of it! How about furniture, or 27 gas bottles?
I don't know what the fuss is about with this truck, it's toy grade and very very cheaply made. Customer service is not very good either, I won't be buying another one that's for sure.
Customer Service from the official WPL Store is better than nearly all the big manufactures. As for the truck, if you don't get what the fuss is about, then it's probably not for you.. which is perfectly acceptable :)
@@TomleyRC still nothing from WPL Store, I complained on their Facebook page because of the lack of contact and then got accused of slander (!), of course slander is when something is untrue, the truth is no one has offered to resolve my issue at all. I think by complaining publicly, they've blacklisted me which is a really odd way to do business. This was my first purchase too, now I know why they don't accept PayPal as a payment.
Tomley is here finally
I love the fact you kept the original Kei chassis and did not make it unrecognizable
Yes, I like to keep things looking as stock as possible
I love this Truck 😄
Love the tires and rims.
Wheelies!
You need a wheeliebar now hahahhaa
Yes haha
And an active aerodynamic wings
Haha the wheelies were awesome! 🤙
I love these little trucks
Wow very very nice ❗❗❗❗
Another Awesome Creation!!!
Cheers Dexter 😎🤟
Good Morning RC Amigos.....✌🏼🤠
Hola
Great build! good luck in the contest.
Awesome whellie!! Yeahh!!
Funny little truck this, I had a rascal once and nearly rolled it going around a bend!!
Richard Hammond style
Nice 1/12 scale carpet track race wheels n tires! Lol! Onroad race that bad boy! 👊😎👍
Very neat 👍
GOD BLESS Take care and stay safe
Thats kool 😎. Coffee brought 👍
Cheers Wayne... big thanks!
the wheels look great on it!! awesome build Tomley RC
Thanks mate
I just ordered mine
Hahaha crazy little truck.
D12 nice video💯💯🤩🤩
Thank you
Hello Tomley RC ! Really cool this little creature that does Wheeling ! 😀😀😀👍👍👍
Cheers dude
Very cool
Scary Fast mate, that'll break your foot if it hits ya!!!! Awesome!!!. Greetings from Colombia 💫💫💥💥🤘🤘👍👍🇨🇴🇨🇴😎
Would certainly hurt!
Loved your content brother 👍🏻👍🏻
Just subbed ☺️☺️
Cheers dude :)
Nice run sir... And I loved what you did... not to cut anything from the chassis. Keep safe always.
Yes, I like to keep it clean 🤟
Pretty well done, Tomley! 😃
Not a fast demon, but pretty fast for the model!
Stay safe there with your family! 🖖😊
Yes, a bit disappointed on the speed. But I guess 21mph is pretty quick for it’s scale lol
It's a fun little thing. Puts some imperfect fun back into RC :)
Wow that looks amazing great job thumbs up 👍
Thanks dude
I'd be lying if I didn't say that I was expecting bigger numbers, but it's still pretty quick for what it is. You'll probably need a wheelie bar if you do get more power down! 👍
Yeah me too mate. New gearbox on order with pretty much 1:1 ratio I think lol
That’s cool, love the stance
😎👍🏻
Hopefully get a run out of mine soon
Phil where can I get those wheel hub adapters? I dont currently have a 3d printer so are they available online at all? cheers 🍻
It’s a guy I know who does them for me. He may be able to ship them out to you. I left a link in the description 👍
@@TomleyRC OK thanks mate I'll check it out
what battery did u put on stock motor
cool little rc and nice run
Thanks dude
These rc's are truly great little trucks. I know I love mine alot,lol. I'm just surprised the metal gears held up to that. Awesome job seeing this 😎👍
Yes, the driveline did good!
What motor did you put in it I've seen those run on brushless for drifting and they are very fast even with drifting with brushless motors.
Does hoonigan sponsor you
Haha... they can if they want to 😅
I vote for this one as the fastest!
Hopefully I’ll squeeze a bit more out of it
He he, it really likes 3S 😎.
Loves it!
@@TomleyRC Yes,Wheelie loves it😁
Can you use wheels of a larger diameter? I have used the wheels from my FEIYUE FY08 on both my 124018 and 124019 which made them do the 60km/h that it is on their boxes instead of only 50km/h. So I have been buying all kinds of wheels that have a 12mm hex which will arrive soon and only one larger set have been just a little faster without any gearing changes so far. One bonus is a bit more ground clearance for grassy surfaces and are faster than the stock ones are on road.
Yes, wheels can change the gearing
what about changing out the rear axle for one with a different gear ratio. keeping your stock looking gearbox?
Yeah, there are a few options. Not sure you can change the axle in the rules
I used to own the full size, not that they are that big. A Honda Acty. Brilliant vehicle, like many of my vehicles including a Mini Pickup I wish I had kept it. But just got a D12 and starting to mod it to the max!
Wow that things a beast how much were all the upgrades
I’m not sure, I bought them a while back. They are not to bad from what I remember
Nice job can you lower the battery for better center of gravity?
😍😍😍😍nice
The RBR/C transmission is geared way higher! And it’ll still look the same from underneath. 👍🏻
Cheers dude. Just ordered one
Do the Dumbo RC rx/tx have good range?
Yes, very good range 👍
Does an gyro works on all rigs? Thx
Should do with most
@@TomleyRC thx man
I think the fact you got it to do a wheelie makes up for a slightly slower top end. If you could find some taller foam tires you might get more top end out of it without changing the gears.
Yeah... I have a new gearbox on order with much better gearing
Got my speed run in and mine is so close to stock with just a bl upgrade. Good luck to all who join the challenge!
Good fun making them faster... 😎
@@TomleyRC always fun to tinker!
Niceeeee wheelies!
You should put bigger tires on the back that will give you more speed without having to re do the gearbox
i know I'm kinda off topic but does anybody know a good place to stream new movies online ?
@Blaine Darian Thanks, I went there and it seems like they got a lot of movies there :D Appreciate it!!
@Benedict Rex No problem xD
Hey tomely rc u should get a body kit for this thing it would look so cool awesome build tho
The elastic bands on the wheels are the difference on this build :-)
Foam ‘Elastic’ bands 😅
I`ve joined buy you a coffee 👍👍👍👍👍👍👍
Did you tell people that it is in the front torsion bar?
No... but you just did :)
Taller tires would add a good amount of speed
You should make it widebody
Good
Not the fastest, not the prettiest but incredibly cool nonetheless 😎👌
Thanks Lee
👌👌👌
That lift off is so cool
Yes...was very funny! And a tough little thing!
I've just converted a maverick ion brushless
witch verison ive been eyeing up the rally car
The short course 1/18
I bet that goes well
Ye a bit lively
I´m sure it won´t take long for you to double your 3S top speed!
Hopefully Del!
Dude!
From that thumb nail I was expecting 80mph 🤣🤣🤣
Hi plz do ftx ravine vs ftx geo plz plz plz
Sorry im kinda dumb but what is a coffee truck
I’ll building a scale truck with a coffee theme
bags of toque but not enough top end, afraid to say the gear box is the bottleneck
New better gearbox on the way
G'day mate. Hows things? I tried drifting one of these stock out of the box on a bitumen road and burnt the motor out within 15 minutes. They are a great truck and I really love them but DO NOT drift them on bitumen with stock tyers.
No just life size build
Changed everything except the shell but apart from that it’s stock😂
Great build, i think your wheel diameter is really hurting you, your way smaller than stock there...
If you need anything 3D printed for the truck, let me know. FOC of course. Unless you already have a 3DP. Here's a link to a few Thangs 3D printed designs. thangs.com/wordreet I have printed a lot of stuff off Thingiverse too and have other stuff I've designed on Tinkercad.
Cheers mate.
Email?
@@richardphillips107 It's just an offer to Mr Tomley mate. 🙂
I do not advise sticking your arm out a high powered vehicle when doing wheelies.
Haha... he’s a Super Hero, they have their own rules!
need 0.5 modulus 9t brass pinion, to omit the 1st counter gear hitting 2nd one.
its about 40% more wheel speed. edit: it'd hit 29 mph anyway doing that.
its a little rough to make the new larger pinion fully mesh to the 2nd gear in line, rules said standard gearbox, didn't say EVERY gear has to be in it. same setup is in my D12 with a 280 motor, works better for drifting.
why bother put any rubber on those rims at all... heehee
or Foam even haha
:-)
could of used some bullfrog snot
Where did the duck go😭😭
Oh... I forgot to put him on! He’s still here.... I’m glad some has noticed it 😎
Any links not from China, I really hate not supporting local shops
WPL is a Chinese brand....and from the official store you get top class customer service abs after sales
So fast it blew the steering out.peace.
Yes haha
6S should see you +40mph
You can better than bro,,I have faith in ye,lol 40 mph bro,,,that's a big motor,,why so slow,,thinks you have pimp up gears ,bro,,40 mph,,you got this bro,,lol👍
Yes... more to come!
Definitely faster on 2sthen stock.
That kind of slow
Yeah... more to come
@@TomleyRC bettt
As always great content! Got me looking into that d12 now too. Hahah. How's parts availability?
Also what is that orange truck up on your shelves with the orange rims? Looks badass! 💯👊🏻✌🏻
FG Modellsport Sportsline. Have 2 videos on the channel of it
It kinda just neoooms away.
Little nipper no one 1/5th scale Petrol RC yet tomliy check rovan Baja 29to 45cc they are fast and Powerful 40+mph better than nitro Easter to maintain and they are a good price 👍
First
So fast lol....
ahhh you should buy a real food truck and sell coffe thats what i thought you ment lol
X2 speed please
金持ちにしかできない。
I have to confess I hate the real trucks! But that maybe down to a person I dislike who always has one. So let me just say, you need more crap in the back of it! How about furniture, or 27 gas bottles?
27 Gas bottles... and a match 😅
@@TomleyRC That'll do nicely!!!!!!!! 😂💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥💥
@@TomleyRC Heh, I've just ordered my first Kei Truck.
I don't know what the fuss is about with this truck, it's toy grade and very very cheaply made. Customer service is not very good either, I won't be buying another one that's for sure.
Customer Service from the official WPL Store is better than nearly all the big manufactures. As for the truck, if you don't get what the fuss is about, then it's probably not for you.. which is perfectly acceptable :)
@@TomleyRC CS has been non existent in my experience - I received mine with noisy gearbox and a locked rear axle and they don't reply
@@triv7252 WPL official store?
Yep direct from WPL store, I won't order from China again, you're screwed if something is not right.
@@TomleyRC still nothing from WPL Store, I complained on their Facebook page because of the lack of contact and then got accused of slander (!), of course slander is when something is untrue, the truth is no one has offered to resolve my issue at all. I think by complaining publicly, they've blacklisted me which is a really odd way to do business. This was my first purchase too, now I know why they don't accept PayPal as a payment.