QUANSHENG UV-K5 Another great SSB firmware, AM fixed + simple installation
HTML-код
- Опубликовано: 16 июл 2024
- Firmware link: egzumer.github.io/uvtools/?fi...
HOW TO UPGRADE FIRMWARE:
1. insert USB data cable to your PC and wait until COM port will be installed automatically
2. push and hold PTT button and turn ON your radio. LED LAMP will be shining.
3. now connect the data cable to your radio
4. open the "firmware installation link" in CHROME explorer and press "Flash firmware"
5. select your active/installed USB Serial COM port and press "connect"
6. flashing process takes a few second and automacally finish. Your radio will reboot automatically.
7. ENJOY THE NEW FIRMWARE! :)
Firmware Manual: github.com/egzumer/uv-k5-firm...
Video: SSB firmware with SPECTRUM SCOPE here: • SSB, FM, AM on Quansh...
Quansheng download center: en.qsfj.com/support/downloads/...
Quansheng UV-K5(8) purchasing link: vi.aliexpress.com/item/100500...
CB Telescopic Whip Antenna : vi.aliexpress.com/item/100500...
RADTEL Tactical VHF/UHF Antenna: www.aliexpress.com/item/32956...
Adapter BNC-F to SMA-F: vi.aliexpress.com/item/744496...
#quansheng #uvk5 #ssb
Prepis Наука
A very nice tour of the firmware. Merry Christmas Paul.
Thanks! Happy Merry Christmas Hank! 😉👍
I think, this radio will be more popular than baofeng uv5r
I think it is already :)
Всё так :)
I don’t know about that .
better to hold, better looking. better community :)
@@jayanderson9068 THere's no reason to buy the baofeng anymore, this takes the cake. USB-C charging, custom firmware and for $15-$20 USD. It's a no brainer
How I enjoy your videos. Always informative. Good links and smooth narration, with sharp videos.
It would be interesting if the firmware could switch from showing the dual band to a band and spectrum meter and back again. Depending what you want to look at. The radio is amazing but the firmware developer's are geniuses. Thanks Paul, Merry Christmas, the best of health to you.
Thanks Mike for your's test abaut egozumer and Ijv mode. I put on mine Ijv and happy with it a lot. 73 fro S5
Just ordered one. It arrives Jan 5. Great for scientific research and experimentation. 😬
M+0 is Manual RF Gain/AGC. Press F + UP/DOWN to change the level 👍
Excellent! Thanks for this info! 😃👍
Thank you for the info and presentation.
Great video! I've this radio since last year. (Anysecu version)
Thank you very much for the easy flash link worked like M
In the newer version of Fagci mode you can enter a frequency by pressing 5 (* is .) and confirm it by M. And the modulation changing by pressing 0.
Thank you Paul. 🤝
With the hacked firmware these are quite amazing radios, mine both have transmit unlocked but of course they should not be operated far from the 2m/70cm bands , the output spectrum is scarily bad. I have not had the time to fully explore the possibilities but they are a great basis for experimentation. Unfortunately some people will doubtless try use the wide transmit range that can be enabled via the keyboard.
A great value for money radio, mine both have the latest Egzumer firmware..
@@Rob2 I may yet restrict the TX coverage of mine, it is a liability to have completely unlocked transmit, particularly on a handheld that gets left in random places in the house.
@@g0fvt Indeed. Mine is set to the 144-146 430-440 TX range that is appropriate here.
This also prevents mistakes with repeater shift etc.
Unfortunately it seems the setting gets erased when flashing firmware...
@@Rob2uk is 144 to 146
@@edkemp6287 Well, I looked it up again as I remembered the band was extended in the UK some time ago.
Turns out that the extension is only up to 147 MHz, and that it has to be applied for individually. Also this ends in October 2024, I don't know if it will be extended by then.
So the 144-148 should have been 144-147 in the firmware, and probably not even that as I understand that the band plan for 146-147 reserves it for wide band applications like data and TV.
@Rob2 Has Ofcom widened the TX for 2m? In the past, it was 144-146Mhz. I used to live in the UK and that was the TX range back then. I'm now in the USA and we have 144 - 148 Mhz for 2m.
Which one is better? One which you talk about month ago or this one?
So, can you use this even on 27 mhz, on the CB-Band?
I just ordered mine but it’s not gonna get here till January 25th I so can’t wait till it gets here
ขอบคุณที่ให้ความรู้ทีดีครับ
Hi and Nice. it is possible to expand the rx bandwith to 50 khz to be able to decode wx sats properly and avoid the hash sound for low if bandwidth. tks
Just installed this F/W. It's good but the TX freq range is set to original 50-600 MHz with airband disabled (118-136). I found when listening on airband AM is good, but when powered up on airband the audio is distorted with strong signals.. Selecting the AGC level or cycling the mode select fixes it. Cycle power and it's distorted again. Seems an AGC bug on power up.
Another great video, Paul. I assume the same would be true of the UV-K6? Is the K6 a big improvement over the K5? Thanks, and Merry Christmas!
They are all the same internals. Basically just a different exterior. Same goes for all variants of Quasheng K5, K6 etc
@@la7dfa Yes, they are all the same... unfortunately.
Wishlist items:
- rotary encoder instead of the white LED
- larger flash space (e.g. 256K)
- RGB LED backlight for settable color.
That is probably what the K6 should have been (in Baofeng models, UV-K5 is with LED and UV-K6 with rotary encoder)
Which one is better Senhaix 8600 or quansheng uv-k6?
I managed to seize up my radio, it stopped changing channels like going on a go slow. Resetting the VFO made no difference so selecting ALL just made the digits big.
has the scope function gone on this version?
Love this radio! Vorth 2times higer price !! Nice toy wrealy
What in the best.current custom fw for am airband réception ? Thanks
Will this work on the original version of this radio? ( non amber display)
Does it work with a macbook? And can someone post the link to the firmware? If I click on the link, a mask appears but no firmware.
Is it possible TX HF-band ? Or is it disabled like CB band ?
That antenna? More performance? Thanks 😅
Sadly, my new K5-8 doesn't receive on HF. Must have changed something in the new radios.
can you add the sms function to this firmware?
I tried two radios today, the k5(8) and uv5r plus, both had poor rx audio quality, and the other party complained that both had poor Tx audio, completely full of static. I cracked a baofeng uv5r out and it was flawless........
I really hope to find a firmware to allow better audio quality, but the FSK modem sending SMS is an abolsutely unexpected treat......... I wonder if anyone will hack it so you can send data via the serial port from a pc etc?
Interested to listen to 2 meter ssb and 440 ssb how does it recieve on those good video thanks
Doesn’t look like it could do more than the Egzumer mod but this one lacks the spectrum. Don’t catch cold there.
Hallo my friend Can it transmit at 27 usb am fm than you also can you flash other firmware without reinstall configuration and calibration?just for play
what's HT unlock all frekuensi ? & any use TX for all band ?
"Compnd" might be for audio compression on TX. Just a guess.
the firmware is no longer available? another link?
Прошивка не доступна, почему?
can this thing TX SSB on 2/70? We have a 2m SSB Net here every friday. Be great to use a handheld if possible
Yes, but you'll likely be chastised.
i liked :D
Thank you! 😉
Paul eu ct3 kj possível o indicativo no quansheng
Can receive in 160m band?
Can it transmit/receive GMRS?
I can't find UNLOCKED at F.LOCK voice of the menu.
Interesting, so all SSB on this is DSB? Was wondering how it (DSB) would work for RX of SSB on VHF UHF for use as a downlink SSB RX for as part of a portable satellite station with FT-817/818? IF it would RX clear enough it would be a great low cost addition to a station for satellites. Merry Christmas!
yes, it is a dual side band DSB used in this receiver
Will this work on the first iteration of the UVK5?
There is a single VFO mode too. Nice way to simplify the screen. 👍
HOW TO: Check the latest firmware v2.5R2. You need to access the service menu mode (Power ON with PTT + S1), access the menu, and assign the function "VFO SWAP" to a side key... This feature in VFO mode, change from double to single.
Also, Single VFO method (new)
Put into Single VFO mode: F +2 A/B
Enter the desired frequency (7 digits).
The VFOs are called VAx or VBx to make it clear which one is active.
what setting is single VFO mode? setting 56 doesn't change the display
If you figure out how to do this, please post it as I would love to know as well. Thank you.@@bonnerglp
In the firmware I use, single-vfo mode only affects the receive operation, not the screen.
@@bonnerglp check the latest firmware v2.5R2. You need to access the service menu mode (Power ON with PTT + S1), access the menu, and assign the function "VFO SWAP" to a side key... This feature in VFO mode, change from double to single.
@@RCVinyl @bonnerglp check the latest firmware v2.5R2. You need to access the service menu mode (Power ON with PTT + S1), access the menu, and assign the function "VFO SWAP" to a side key... This feature in VFO mode, change from double to single.
I have a question. How is this firmware different from the egzumer one?
for 20 bucks a pc and a little time.... you know it. 73
Yes i got it thanks but this firmware we cant TX. Its locked
The symbol percentage of battery disappears.
Firmware isn't valid anymore? Is there a fix?
link broken now. does not load firmware.
I can't find on F.LOCK the sub voice UNLOCK ALL...
Download Link no longer works?
Hello , I am on4baq how can I download the firmware for the uv-5 k ? Is this with win zip ? 73 on4baq
What’s difference is in between N and N- filter bandwidth please?
N- is even narrower than N
file is no longer there
Why is this video labeled single sideband when it is really double?
Because no everyone know what DSB means. SSB sounds more familiar to everyone.
@@OM0ET Thank you.
Hello Paul, which or which website has this firmware, or output power also with ssb, happy holidays and a happy new year 73 😊
Firmware link is in video description. SSB is for RX only.
@@OM0ET 😊👍
followed your instructions can not flash firmware to device,do I need a special cable or does any usb to c type cable works?
You need that baofeng 2 pin cable. USB C will not do that. USB are just for emergency charging.
Thanks for your fast reply,l just searched for baofeng 2 pin cable and l found out that it has 2 pin as you say,where do l plug it?l thought it goes in the type C port
@@kiroslabtsipgreg3992above the USBC door.
Thanks allot.
@@kingearwig Thanks allot,l understand,and found the cable to order
Am surprised it does not have 8.33 step size on AM airband, the egzumer 0.22 does.
Also IJV does
I am using this firmware and think it is great. However, I cannot seem to go from VFO back to Memory mode even though I press function then the "3" button. I can go the opposite from memory to VFO, but not the other way. Has anyone else experienced this issue? Thanks.
No need to press the function button, just use the 3 button to toggle between VFO and MR mode. Hope this helps!
It's a long press on 3 button...
Thank you!!
Can you use a data cable from another Chinese radio?
Yes, Baofeng for example
Is this firmware only for SSB? Is it different from the other firmwares?
No, FM for TX and AM, DSB CW is available for RX.
@@OM0ET Can you please tell me where to find the latest firmware? Thx
Will this radio receive a sw transmission
yes but only from 15MHz and up
Ac8jn here.. thank you for being an Elmer in this area thank you for you very informative videos . Hope you don't mind if I download them for future reference incase yt decides to remove your channel. Thank you again 73's Ac8jn. Also it's like the qrp version of my yaesu 857..
If you think about it..
Well, I just hope RUclips will not find any reason to remove my channel, hihi 😁😁 Thanks for your compliment!
This is egzumer 0.21?
My keys work different
8:13
Failed to connect to the serial port. Can anyone help please?
reconnect the cable after the radio is ON with LED ON.
How do you use the spectrometer?
The IJV firmware don't includes the spectrum scope
Can the firmware link be open in Firefox or Brave browser or only in Chrome browser?
Excellent work can anyone guide me how to program mine to cover all modes and frequencies what pc and cable.il.need appreciate any info or feedback thanks guys ct576
in pratica la radio la si può usare in banda laterale dai 10 ai 17 metri ma è megluo non trasmettere a causa delle armoniche, giusto? Quindi anche in 2 metri è meglio non trasmettere...
Ho capito bene? 🤔
La radio funziona bene in trasmissione sui 2 metri e 70 cm (vhf/uhf), per tutte le altre bande o frequenze e consigliato solo l'ascolto come se fosse un piccolo radio scanner.
@@Hypercubeaudio Come prevedevo... Infatti la uso principalmente come scanner tascabile... Per trasmettere in HF uso l'HF 😉
@@Hypercubeaudio Quindi immagino che per esempio la trasmissione in DSB in 2 metri non crei problemi, giusto?
@@MrTrico78 esatto, tutte le modalita' (AM/FM/SSB) in 2 metri e 70 cm funzionano come ogni altro HT. .73 de 2E0RPS .. ah dimenticavo, io ho fatto l'upload dell ultima versione firmware di Egzumer
@@Hypercubeaudio Ah, non lo conosco, ma mi documenterò... Il DSB è sempre presente?
can transmit on 2 meter ssb?
I've seen video that is does but has extremely poor trx
great what about harmonics issue that is throwing stronger harmonics then original broadcast channel. cool feature but some transmission going over the air band with harmonics and with this is breaking a law international/federal
Ma il problema delle armoniche è presente a prescindere dalla banda in cui si trasmette? Per esempio se trasmetti in DSB in 2 metri, genera comunque armoniche?
@@MrTrico78 harmonic transmitted is much higher power than the original frequency, harmonics are normal but they are few magnitudes weaker than the original frequency
Hi can you tell me if the radio have lsb?
It doesn't go lower than 17m
@@James-hy8guI've seen in other videos it goes to 20m.
@@DonauweIIe oh good to know! I'll have to install the new mods on my uvk5 and check it out.
Dsb receives upper and lower sideband but lsb will be shifted. Lsb is used on parts of 11m band
No scope tho ❤🎉 73
How are you showing one vfo ?do you loose the spectrum?
spectrum is not included in this firmware
Isnt that the k6?
No it is the k5(8)
Yes, k6 and k5(8) are the same unit.
@@alanklasek7195 From what I understand the only difference between all the models is the color of the display and some details in the case. The electronics are the same.
I followed these exact instructions and it bricked my uv-k5. Does not power on now. Only thing it will do is power on the light on top if I press the ptt and turn it on. ?? now what?😤
Try to reload custom firmware again, or try to reload an original firmware from the IJV Mnual website.
Unfortunately colleague Paul, they deleted my comment yesterday where I suggested you to make us the recommendation of what is the best firmware for the Quansheng for you and what things you would add or remove for a good ham radio, and if you would agree to create a group on another platform more everyday I hope you understand me, to be able to talk freely about your opinion on the matter (the creators of the youtube algorithm, do not like competition) hahahaha, but how would I do to contact you by another means not as "jealous" as youtube ? ??
Anyway, the radio was cheap, it entertains me and doesn't matter if it ends in the trash. It cost me 3 lattes and a bun.
Lattes do taste better though. Not sure about the bun.
Hi, is there another way to get the firmware and flash app? as the link to fw isn't available, linked page gives following error.. Http error: 404
Error while loading firmware, check log above or developer console for details.
Have the same problem error 404 no firmware
The boring thing is, no company is building a handheld that can tx ssb !
I'm still hopeful that a CB band works 🤞🏻
Depends with what you expect. It does really not work for transmit, since it is a 2m, 70cm radio with a LOT of disturbance on the VHF bands. Receive on "SSB" is USB + LSB at the same time, aka DSB.
But with a proper antenna you will definately hear stations.
no point
So frustrating that my country banned this model even for licensed hams
LOL, which country?
@@Wondobar Israel
Who makes this firmware?
there are many developers on the net
Yea, but who makes THIS one? It is not egzumer.@@OM0ET
@@blueline308 the startup screen shows "IJV" mod. Not the egzumer mod I previously had.
No longer spectrum available?
Unfortunately no. There is no spectrum in this version.
Is it really that important ?
There are different mods available by different developers. Get the mod with the scope if you want that
@@The0nionKnight это как раз самое важное так как позволяет использовать приемник в качестве сканера. Плохонький приемник DSB это не более чем приятный бонус к панорамному индикатору.
@@James-hy8gu can you direct me to a source for various firmwares. Also somewhere a noob can learn how to do it.
I hack android phones for fun so this shouldn't be too hard😂😅
Is this firmware also suited for UV-5R plus ?
No
UV-5R is Baofeng
Quansheng UV 5 r plus yes Baofeng uv5 r no
I think so as long as it comes from the UV-K5 series. I have tried almost all the newest versions of the firmware to my Quansheng UV-5R Plus. My favorite firmware modder is facgi. 😊👍🏻✨
The latest one is this:
ruclips.net/user/shortsj82auSL4Nj8?si=Gdce-MhO1uTaF3h-
Theres absolutely no way that HT can talk on 10meters.....that radio has been wrongfully hacked
It can but internal filters mean only microwatts get out, and watts of harmonics including in airband.
There are people working on adding filter modes to use hf tx
What is the fate of manufacturers such as Icom, Alinco, Kenwood or Yaesu with the offer of such cheap handheld radio stations???? 73
Given the lack of quality of these things?
Japan will need to catch up or lower their prices. Yaesu is even rebranding cheap Chinese ht now. The old boys have been resting on their names too long
I totally agree, I have a DJ-F1, IC-24ET, FT-911, TH-27 in my old collection of handheld radios that are 30+ years old. With minimal repairs they are still functional, but I also have a Baofneg UV-B5 that has been working for 10 years. The Chinese are taking over a significant part of the market with radio devices, using the new SDR chips the war will be merciless for the buyers of radio stations. I hope that we will profit from it with cheaper equipment..@@edkemp6287
I do wish the Chinese would make an HF only qrp handheld trx. That would be amazing. There's not enough HF radios imo. G90 and the other 10w ic705 competition. Forget the model number.
@@MM0SDK x6100. But again, quality is awful
I'd like to find a printable cheat sheet. Hate videos.
Please link to new firmware
your firmware link does not work
Hi. I tried the procedure (even several times), but something went wrong and now my Quansheng is blocked and no longer turns on. The updater message said:
Version check passed
Flashing firmware
Flashing... 2.1%
Flash command rejected. Aborting.
I also tried to restore the original firmware from the official website, but nothing.
Is there any file to try to restore or should I resign myself to using my Quyansheng as a door stop? 🥲
Ok, solved with a new programming cable. Congratulations for the firmware: now in aeronautical band the reception is very good!