Get The Perfect Spray Can Paint Job Every Time - Tips And Tricks
HTML-код
- Опубликовано: 6 окт 2023
- In this video I'll go over how you can get the perfect spray can paint job every time using these tips and tricks. I'll cover things like should you wet sand your base coat before spraying clear coat, what are the differences between metallic paint colors and solid base colors, how to get rid of orange peel in your clear coat and much more.
Here are links to products which were used in this video:
My Amazon Store: amzn.to/3YH84sm
2k Clear Coat: amzn.to/3OzXLSo
2k Rapid Filler Primer Gray: amzn.to/3DZy9JT
5 Inch Orbital Sander adapter: amzn.to/45sc8PG
600 Grit Sandpaper: amzn.to/3QKl2Ug
Grease and Wax Remover: amzn.to/45dOV3D
Soft Sanding Block: amzn.to/45fXkDU
Microfiber Sponge: amzn.to/45wA18A
Microfiber Towels: amzn.to/45aTT1c
Facebook: / ratchets2015
Twitter: / ratchets15
Instagram: / ratchetsandwrenches
Disclaimer:
Due to factors beyond the control of Ratchets and Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchets and Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchets and Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchets and Wrenches. 
Авто/Мото
My Amazon Store: www.amazon.com/shop/myratchets
OMG, that laugh was exactly what I needed to start the day "drug addicts and alcoholics at your local body shop can spray paint your car, so can you?" hahaha
He's not wrong 😂
Yeah, but they're gonna enjoy huffing that paint more than me... 😉
My 66 Chevy C20 had a dark fawn dash ( flat with texture) which they don’t make anymore, I sprayed with krylon otter brown satin, then sanded the gloss off & sprayed clear matte on. All with rattle cans it came out perfect.
I sell PPG paint every day and educate some of our customers on what to do. NEVER touch the base coat after painting it unless you have a run, bug, etc. then you must recoat with the base coat before appling the clear. PPG suggests 20 minutes up to 24 hours to apply the clear. Apply the clear as soon as you can so dirt and bugs don't invade your space. Nice job with the spray max cans.
Great vid Eman! I just finished up some body work on my Dads 71 VW bus yesterday. Boy was that fun! Things rust so easy, thin steel I guess
Nice tips. hoods/fenders/doors can be removed in parts to spray more completely and facing the sun in low wind/humidity but high temp conditions. Some more direct UV light can reduce the cure times depending on the paint. Light even coats with some even cure time in between can lead to a better finish overall with less sanding. Also important but maybe not emphasized is the use of proper PPE, metallic and silicone bits can really tear up your lungs, do the research before attempting a DIY job in the backyard.
So interesting. Thank you
Glad you enjoyed it
Thank you!
Love seeing you bro ✌️
When repaint, I'm not looking for perfect but good. 👍😁
❤ omg !❤
Where do you buy the paint and primer in the cans? You never say! I’m in Arizona Phoenix
Nice.
Now, to be fair Sir, you did this with spray cans, in a driveway, and it looks FAR better than it did when you started..... I think it looks pretty good....
So don't take this the wrong way, but... I think pulling off the hood, and putting it on some padded sawhorses would help A LOT. It would get it inside, AND you could walk ALL THE WAY AROUND IT while spraying.... I feel like, in the background of your shots, the worst errors are up by where the hood meets the cowl windshield area...
And I've had pretty good luck just doing a quick little shot of spraypaint on the hood latches, and then take them off.... When you put them back on, it's pretty easy to see EXACTLY where it was....
But really, these are nitpicky little differences of opinion... It looks 98% better than it did with the clear peeling off..... No doubt, it's presentable now....
When I do this kind of thing, I mean yes, it is hot where you are... but the discharge cools the cans... I keep a bucket of hot water right there, and I keep dunking & reshaking the can.... The can has to stay WARM... You'll see a better result... Uhhh, but be careful, 1 drop of water will ruin the whole job, so... Dry off that can before you spray more.... The warmth allows a better mix in the can, and it will increase the pressure the propellant in the can is providing, which are both good things....
Orale homie that was funny. Dang I worked with those guys back in the day 🤣🤣😂🤣😂😂😂😂💉💊💉
where are you located? Do you have website ? It looks like SOCAL
Are you in California. I'd like to take my 1983 Chevy Squarebody to you. I live in Los Angeles.
If my paint is turning into yellowish color. Can i sand off the clear coat and reapply another clear coat? Will the color underneath stay?
I'd grab a fender or something from a junk yard and practice on it first, but yes you can sand the clear coat and apply a new coat but do your homework first. Easy to mess up.
I'm thinking of doing the same thing. I don't care about the esthetics, different colors due to paint fade due to clear coat peeling.
Thought is to sand it then spray it with clear coat just to get the protection back. And streaks or fade doesn't look anywhere near as bad as a 2005 hyundai santa fe with peel on every single panel.
You might be able to fix it without painting. Look up "paint correction". It worked in my case but not sure what paint you have.
It's not only that, but the body shop will keep it for a month! It's beyond belief
Its because they are in the back drinking most of the time :-)
When is the deep scratch repair video going to air?
Hopefully next Saturday.
More coats in different directions may help, but there is the risk of the paint looking more metallic with less color. 🤓
More overlap too
My wet sand and polishing just dodnt come out looking as good
I don’t take no drugs, can I still do it? 😁
it'll be an uphill battle but doable :)
@@myRatchets 😄
Time to do the roof...
I use your metode but all my work go to the hell, the varnish cracket in time.
If the clear coat cracked, you painted in too high of heat.
Note to self, look for simple colors when buying cars. Metallic cant be duplicated without a spray gun
You can always paint it with a HVLP spray gun from HF and access to an air compressor.
My question is, why bother with spray cans? You have a large well equipped shop, your a pretty smart and knowledgeable guy. Surely you can use an HVLP gun. You'd save a bunch of money and do a much better job over using spray cans.
I assume the point was to show "do it yourselfers" how to do it who might not have those.
I’ve heard ya gotta snort a lot of whiskey and drink cocaine to get professional results. A friend told me this.
Yeah, the two ads that could not be skipped were longer than the video. Gotta go to work now, don't have time to watch.
I don't have non skipable ads activated, Idk why you are seeing them like that.
@@myRatchetsThank you for responding. I've been subscribed to this channel for a long time, and I rarely miss your videos. This is the first time I have encountered this to this degree. It started with a very long ad for a gun holster, which is about as far from my realm of interest as it gets; and was followed by some sort of video device, I didn't watch either ad and muted them until they were over. I don't know what RUclips is doing, but it's a pretty rotten thing, especially if you didn't consent to it, and you're not getting paid for launching their very long commercials. I have encountered this type of ad before, but they were usually only a minute or so. These two together came to roughly ten minutes. I'd be surprised if I'm the only one who has experienced this, but I'm a blabber-mouth when most people just shut up and live with it. I just got home from work and have my microwaved left-overs sitting on my desk. I'm going to try to watch this video now before I pass out. I've always learned from your videos.
@@myRatchetsI had someone complain yesterday about having to watch a really long ad too on my channel. Guessing it must be a glitch in system. That or they didn't see skip button 🤔🤷♂️
Ok hear me out. What if I do my metallic basecoat like you did and then i just sort of spritz the whole panel to get a final thin layer of randomly placed atomised metallic all over in order to counteract the streaks?
Truth be told. Those drug addicts and alcoholics have better painting skills than me!
Don't know what's up with this video, but it tried to force feed me almost ten minutes worth of un-blockable ads. Next time I see this, I'll be dropping this channel.
Entitled much?
@@TheLukaszpgClearly you don't fully understand this conversation. Your best bet would be to close your mouth firmly and let the grown-ups do what we do.
Hi Thomas. In your opinion what is a reasonable duration of ads for this nine-minute video?
@@Cockerham I feel pretty sure the ads shouldn't run longer than the video itself. I don't really have a problem with the length of the ads, if I can skip an ad that is meaningless to me. Each of the two ads I was force-fed were just short of four minutes. If they were a minute or so each, I wouldn't whine, but I've never encountered an un-skippable ad combo punch that was longer than the video I wanted to watch. I don't understand why this is even a subject of debate. Back when I had television, a one-hour program had about fifteen minutes of advertising; a half-hour slot had seven or eight minutes. By that measure, a nine minute presentation shouldn't have more than about two and a quarter minutes. If I were about to sit down to my favorite one-hour tv show and was hit with an hour of advertising before or during the show, I'd walk away. So would a lot of folks.
@@thomasgartman4025 I agree.
Do I need to become a Drug addict or alcoholic to do this?
No but it s never too late😂
Only if you decide to do it professionally.