I jotted down the settings you went thru because some of it is vague in the manual. However, I have some Battle Born batteries that I'll leave in place. I called their tech support to review the settings for the Lithium battery profile. They furnished me with all the parameters for their battery profile using this unit. Very nice people. I will share them when I verify they all work. When I finish gathering my components (about 2 weeks), I'll be installing my unit. Hopefully I can add to your video for other people looking for information on this unit. Thank you for the help.
Thanks so much great video, all my parameters Answered,I also like how you Stated where you got your information, I emailed them and never got an Answer, Thanks Again
@@homeinsteadseligman So at your settings my all in one was not Charging my two 24v Lifepo4 Batteries it was down to 26.4 v,so I changed the Parameters on #37 to 28.6v and it started charging, it just stopped charging at 28.5 volts which my Battery monitor said 82%capacity 382ah out of 440ah, so I have my smart charger finishing of the charge and it will tell me the ah it put in etc, I'm mainly boondockin so I need my Batteries kept as full as possible,
Also read some articles on will Prowse solar power forum and a few guys Stated that there AIOs don't put out 14.6v for lifepo4 batteries which sun gold power techs said it's a design flaw but still works, the People on the forum and I disagree that long term under voltage charging will ruin the Batteries, I could only get a reading of 13.6v
Thanks for the video! We have the same system and I’m going through the same thing as you right now with the emailing! how has it been working for you?
Hello Sir please help out i have a brand new hybrid buy when i plug a fridge the inverter fan start yo run non stop and when i plug my t.v the pictures are not clear with vertical lines as well what could be the problem?
I jotted down the settings you went thru because some of it is vague in the manual. However, I have some Battle Born batteries that I'll leave in place. I called their tech support to review the settings for the Lithium battery profile. They furnished me with all the parameters for their battery profile using this unit. Very nice people. I will share them when I verify they all work. When I finish gathering my components (about 2 weeks), I'll be installing my unit. Hopefully I can add to your video for other people looking for information on this unit. Thank you for the help.
I have the 5000w model, but the interface is about 90% the same, so this was an excellent starting point for me.
Thank you!
Thanks so much great video, all my parameters Answered,I also like how you Stated where you got your information, I emailed them and never got an Answer, Thanks Again
You're welcome! I'm still learning so if or you figure out something let me know
@@homeinsteadseligman
So at your settings my all in one was not Charging my two 24v Lifepo4 Batteries it was down to 26.4 v,so I changed the Parameters on #37 to 28.6v and it started charging, it just stopped charging at 28.5 volts which my Battery monitor said 82%capacity 382ah out of 440ah, so I have my smart charger finishing of the charge and it will tell me the ah it put in etc, I'm mainly boondockin so I need my Batteries kept as full as possible,
Also read some articles on will Prowse solar power forum and a few guys Stated that there AIOs don't put out 14.6v for lifepo4 batteries which sun gold power techs said it's a design flaw but still works, the People on the forum and I disagree that long term under voltage charging will ruin the Batteries, I could only get a reading of 13.6v
I'll have to check what mine are reading.
Thanks for the video! We have the same system and I’m going through the same thing as you right now with the emailing! how has it been working for you?
THANKS -- Saved y ass -- KEN
Battery setting corresponds to number of primary 3 vdc cells deployed in array:
12 vdc = 4
24 vdc = 8
36 bdc = 12
48 vdc = 16
Hello Sir please help out i have a brand new hybrid buy when i plug a fridge the inverter fan start yo run non stop and when i plug my t.v the pictures are not clear with vertical lines as well what could be the problem?
Oh yeah, how's the system running?
Very helpful! Thank you so much!