Gracias por fin un video nuevo de yeswelder 250 ac/dc yo la tengo hace 6 meses voy poco a poco practicando aluminio por favor más video como esos!!!!🙏🏻
¡Gracias por tu comentario entusiasta! Nos alegra saber que estás disfrutando de tu Yeswelder 250 AC/DC y que te gustó el video. ¡Mantente atento para más videos como esos!
on n'utilise pas des électrodes au cérium pour l'alu, mais des tungstènes pures ou au lanthane, et surtout on ne montre pas des conneries sur youtube comme celle de souder en TIG les bras nus, car la peau va être brûlée par le rayonnement de l'arc électrique. we don't use cerium electrodes for aluminum, but pure tungsten or lanthanum, and above all we don't show bullshit on youtube like that of TIG welding with bare arms, because the skin will be burned by the electric arc radiation.
From The Fabricator "Inverter Machines and Tungsten TIG Welding When inverter GTAW machines came on the scene, they changed everything. The balance control can be set much further toward electrode negative (EN) while still getting good arc cleaning action. Since only a little electrode positive (EP) is used, the tungsten electrode stays much cooler. In fact, the best electrodes for AC inverter GTAW machines are generally ceriated, lanthanated, and rare-earth electrodes, which are all sharpened to a point and can retain the point very well during use. Thoriated, zirconiated, and pure tungsten electrodes are not often used with AC inverter machine"
I’ve been trying to find one of these machines and found out they’re discontinued. I really wanted one and can’t even find any online. I really liked the blue color of the machine😭
How do you keep the arch going for more than 2 seconds without shutting the welder off? My brand new tig-200p wont arch for more than 2 secs without hitting some sort of shut off safety i guess.
Add a second of pre flow.. clean up your starts. I like a 60 degree point sharpened on an Amazon tungsten grinder.. these tips above made a world of difference
Excellent!! Thank you so much for this. I recieved my 250p just a few weeks before this video was uploaded and so I put the AC portion on the back burner due to lack of proper instruction. I couldn't find anything at the time to help walk me through the aluminum side of my 250p, but today I have a project that I can't ignore so I looked again and found your vid. This is exactly what Ive been needing. Thank you so much for taking the time to put this together for us.
Unfortunately Yeswelder phased out the Tig 250P AC/DC machine. Please bring back the Tig 250P AC/DC welder.
Gracias por fin un video nuevo de yeswelder 250 ac/dc yo la tengo hace 6 meses voy poco a poco practicando aluminio por favor más video como esos!!!!🙏🏻
¡Gracias por tu comentario entusiasta! Nos alegra saber que estás disfrutando de tu Yeswelder 250 AC/DC y que te gustó el video. ¡Mantente atento para más videos como esos!
Thx!
on n'utilise pas des électrodes au cérium pour l'alu, mais des tungstènes pures ou au lanthane, et surtout on ne montre pas des conneries sur youtube comme celle de souder en TIG les bras nus, car la peau va être brûlée par le rayonnement de l'arc électrique.
we don't use cerium electrodes for aluminum, but pure tungsten or lanthanum, and above all we don't show bullshit on youtube like that of TIG welding with bare arms, because the skin will be burned by the electric arc radiation.
From The Fabricator
"Inverter Machines and Tungsten TIG Welding
When inverter GTAW machines came on the scene, they changed everything. The balance control can be set much further toward electrode negative (EN) while still getting good arc cleaning action. Since only a little electrode positive (EP) is used, the tungsten electrode stays much cooler. In fact, the best electrodes for AC inverter GTAW machines are generally ceriated, lanthanated, and rare-earth electrodes, which are all sharpened to a point and can retain the point very well during use. Thoriated, zirconiated, and pure tungsten electrodes are not often used with AC inverter machine"
Yo u gunna send those welders you welders talkign about??? I need one over here please
I’ve been trying to find one of these machines and found out they’re discontinued. I really wanted one and can’t even find any online. I really liked the blue color of the machine😭
I do enjoy my machine 250p works great
I am in Orlando fl and have the yeswelder pro250 tig. I need it repaired. Do you know who I can contact for repairs
Can you explain entire setting for best aluminum wrlding? Same welder. Tks.
How do you keep the arch going for more than 2 seconds without shutting the welder off? My brand new tig-200p wont arch for more than 2 secs without hitting some sort of shut off safety i guess.
🤔 What about titanium?
Do you guys have any other suggestions or tips to share about welding aluminum?
Bring back this machine
Add a second of pre flow.. clean up your starts. I like a 60 degree point sharpened on an Amazon tungsten grinder.. these tips above made a world of difference
Excellent!! Thank you so much for this. I recieved my 250p just a few weeks before this video was uploaded and so I put the AC portion on the back burner due to lack of proper instruction. I couldn't find anything at the time to help walk me through the aluminum side of my 250p, but today I have a project that I can't ignore so I looked again and found your vid. This is exactly what Ive been needing. Thank you so much for taking the time to put this together for us.
What is good model machine for aluminum/steel for a hobby and small jobs.
I don't think this model is available anymore.
Thanks,
What is the difference between tig 250p and tig 200p? Is it only the thickness of aluminum that can be welded?
The demonstration was very helpful but where is this dudes safety my arms get burnt up with just a t shirt
I don't have experience with Aluminum welding,but thanks for sharing about it friend 💪😁