What a great pro!!! He makes his pupils think and sweat by everytime ask them questions to make them think for themselves learning problemsolving! Wow! I am impressed!
You just saved me $300 with this. The ohm Meyer read just under 5ohms. I disassembled the piece, and it wasn't working because the two halves that screw together weren't together. They were 0.200 apart, so the enrichment circuit would never open.
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Wow. so informative. Thanks. My korean service manual was so poorly translated and had no real info at all. This video explained everything I could possibly want to know about auto by-starters
Shane, Thank you. I just got a used Honda Metro which was flithy. I cleaned the carb and its working well, but I couldn't figure out why the bike would rev so high when I first started (five minutes at 40 degrees outside), then It would idle down perfectly. It's suppose to do that. Thanks so much.
Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money. Join this channel to get access to perks: (Free tool giveaways and member-only videos) ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin Give us a high 5 here: www.paypal.me/how2wrench
ripping on the guy paying attention in school and trying to learn something. have a bad day? you just earned a free service at my shop all you have to do is say your retiredatenpilot. hope your year gets better.
Let me try and see I can catch Shane to answer quick. (FYI. He answers channel members questions daily...best $1.99 you'll ever spend) He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
thanks Shane, I am checking out a Honda SA50R with a cold start issue and leaning towards this being the problem. Is that a Harbor Freight meter? ....as long as it works :-)
Yo! Don't mind the repeated reply. I do this for all comments for others to see the web and donation links on older videos. I'm sure I have gained your support and subscription after all the positive engage you have had. Thank you and I'm grateful. Thank you for the kind words. If I can ever be of service to you, here is a video explains how to connect with me. ruclips.net/video/vjvmB01ebcs/видео.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
I believe that maybe whats wrong with my GY6 engine. It'll take me a while to start it then it stays on warms up and rides. Then when I turn it off and try to warm start it nothing happens. It's either that or some kinda electrical problem I can't find. help me out..
We grabbed Shane quick and he said what ever the stock fuse in the vehicle is. Most common would be a 10 amp for some thing like this. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I have a small quad and the choke isn’t connected to a power source( was rigged by prior owner). If the choke is open, leaving the port open, allowing an easy start, will it effect how the motor runs at WOT as the needle isn’t closing?
Let me try and see I can catch Shane to answer quick. He is preparing for an extended stay in Japan training students this winter. His member inbox and one on ones get first response and he does try to get back to others. We are just the social media team. Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
A question please: The E-choke starts receiving 12Volts current inertia when the engine is running. After the current (12 volts) is maintained while the engine is running, or some system switches off the current E-choke ???
Hey there, Working our way down the lists of requests. We only forward member emails or orders as the demand is beyond his bandwidth to answer. FYI...Everyday he answers member questions before heading into the shop. If a channel member a little logo will show up next to your name and these requests go directly to him. Let me try and see I can catch Shane to answer quick. He just returned from Africa training students this summer. His member inbox and one on ones first on the list. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-service-60-minutes-one-on-one Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
We love sharing comments like this with Shane. High Fives or making us better are a gift. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
That's in our electrical system playlists for sure! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Shane is in Africa training students this summer. We are just the social team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your RUclips handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I'm the intern studying under Shane. He's on the road training techs and not here to ask this week. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! Consider joining...best $1.99 you'll spend this month 😁 One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough... He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below! That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
my bike wont start , take off the air box dump a bit of fuel in there, it starts and will continue to start all day . next morning wont start . . .it is a yamaha nouvu 2 , its getting fuel to the carb (fuel line off ,crank the engine, fuel comes out) . strange thing is once i get it started it runs all day fine , starts no problem. but if it sits for more than 12 hours. it will start for a second then die and will not start for anything . .until i pour a bit of gas where the air box connects. i thought if i understood carbs with these symptoms the problem would be obvious. but perhaps not Reply ·
Just another over-engineered screw-up by Honda. Just give us a manual choke which works every time and forever. Instead, just an expensive stupid way to do something otherwise very simple. It's a $75 part! But nice job on the video.
We try to reply to these Good BUT... comments with this: You probably won't enjoy the other 700 videos on hear that have students in the background, as these are for students in training. If your looking for SHORTER direct videos make sure the video length is short and no one else is in the video. Be mindful to the community here and your welcome to be here. If ever looking for technical help or a business collaboration call him directly @ (602) 345-0432 Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Admin-H2W
What a great pro!!! He makes his pupils think and sweat by everytime ask them questions to make them think for themselves learning problemsolving! Wow! I am impressed!
You just saved me $300 with this.
The ohm Meyer read just under 5ohms.
I disassembled the piece, and it wasn't working because the two halves that screw together weren't together. They were 0.200 apart, so the enrichment circuit would never open.
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Wow. so informative. Thanks. My korean service manual was so poorly translated and had no real info at all. This video explained everything I could possibly want to know about auto by-starters
Thank you for explaining how these things work.I am working on a scooter now and couldn't find any information on these chokes.
U can't be more informative than that ...thanks a lot for sharing very useful
.
Shane, Thank you. I just got a used Honda Metro which was flithy. I cleaned the carb and its working well, but I couldn't figure out why the bike would rev so high when I first started (five minutes at 40 degrees outside), then It would idle down perfectly. It's suppose to do that. Thanks so much.
at about 3:55, fused jumper wire, thats a pro move. never seen anybody mention this outside of a service manual. it'll save your butt eventually.
Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money.
Join this channel to get access to perks: (Free tool giveaways and member-only videos)
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
Give us a high 5 here: www.paypal.me/how2wrench
Would scare me to see Big D at the service repair facility, with his awesome enthusiasm.......................I see Harley tech in his future
ripping on the guy paying attention in school and trying to learn something. have a bad day? you just earned a free service at my shop all you have to do is say your retiredatenpilot. hope your year gets better.
@@garonburwell9008 LOL, No thanks, most likely chain smoking hacks like Bid D and his cough,,, But what he said at the 5:08 -5:12 mark, please follow
Thanks for this great video. I think mine is stuck down, so it is very hard to start. I hope I can fix it or replace it cheaply.
Cool video, very informative. Great teacher. Thanks guys!
Agreed, that's a good teacher right there. Great video.
Nice video guys.What if the choke is fine,but the power is from the bike isn't.Is there a set volt from the bike 12v from the stator ??
How about showing us how to check if voltage is coming from harness to the Bi-starter connection ?
Let me try and see I can catch Shane to answer quick. (FYI. He answers channel members questions daily...best $1.99 you'll ever spend)
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Great video, great knowledge, bad sound...but thumbs up for the schooling. Get an external microphone and keep making great videos!!! Thanks you guys
does this also apply to the manual crank
thanks Shane, I am checking out a Honda SA50R with a cold start issue and leaning towards this being the problem. Is that a Harbor Freight meter? ....as long as it works :-)
Thanks RUclips friends.
Thanks for the post🙏🏻👍🏻
Yo! Don't mind the repeated reply. I do this for all comments for others to see the web and donation links on older videos. I'm sure I have gained your support and subscription after all the positive engage you have had. Thank you and I'm grateful.
Thank you for the kind words. If I can ever be of service to you, here is a video explains how to connect with me.
ruclips.net/video/vjvmB01ebcs/видео.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Nice job. Thanks for posting.
I believe that maybe whats wrong with my GY6 engine. It'll take me a while to start it then it stays on warms up and rides. Then when I turn it off and try to warm start it nothing happens. It's either that or some kinda electrical problem I can't find. help me out..
What amp fuse are you using on your jumper Leads
We grabbed Shane quick and he said what ever the stock fuse in the vehicle is. Most common would be a 10 amp for some thing like this.
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I have a small quad and the choke isn’t connected to a power source( was rigged by prior owner). If the choke is open, leaving the port open, allowing an easy start, will it effect how the motor runs at WOT as the needle isn’t closing?
Let me try and see I can catch Shane to answer quick. He is preparing for an extended stay in Japan training students this winter. His member inbox and one on ones get first response and he does try to get back to others. We are just the social media team.
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
so with the key on but scooter not running would the bystarter get warm/hot like yorus
No it won't because power to choke is from the bikes stator, unless the bike is running, there is no voltage to it even with key in on position.
A question please:
The E-choke starts receiving 12Volts current inertia when the engine is running.
After the current (12 volts) is maintained while the engine is running, or some system switches off the current E-choke ???
No,it M U S T stay on all the time,otherwise it will retract,and the idle will be T O O ....T O O rich! Danger!!!!!
What does the bigger connector connect to ?
Hey there,
Working our way down the lists of requests. We only forward member emails or orders as the demand is beyond his bandwidth to answer.
FYI...Everyday he answers member questions before heading into the shop. If a channel member a little logo will show up next to your name and these requests go directly to him.
Let me try and see I can catch Shane to answer quick. He just returned from Africa training students this summer. His member inbox and one on ones first on the list. We are just the social media team. He plans on answering channel MEMBER questions each Sunday!
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-service-60-minutes-one-on-one
Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Still in 2024 good 👍
We love sharing comments like this with Shane. High Fives or making us better are a gift.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know!
Jenny
Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
They should tell you how to check the power going into it from the scooter
That's in our electrical system playlists for sure!
Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
What if my choker is already out before I start my scooter is that’s the problem my scooter cut off when accelerating
Shane is in Africa training students this summer. We are just the social team. He plans on answering channel MEMBER questions each Sunday!
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your RUclips handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I already fix’s my scooter from top to bottom my self thanks anyway
ohms 4.2 ohms cold? OK?
I'm the intern studying under Shane. He's on the road training techs and not here to ask this week. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! Consider joining...best $1.99 you'll spend this month 😁
One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough...
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
my bike wont start , take off the air box dump a bit of fuel in there, it starts and will continue to start all day . next morning wont start . . .it is a yamaha nouvu 2 , its getting fuel to the carb (fuel line off ,crank the engine, fuel comes out) . strange thing is once i get it started it runs all day fine , starts no problem. but if it sits for more than 12 hours. it will start for a second then die and will not start for anything . .until i pour a bit of gas where the air box connects. i thought if i understood carbs with these symptoms the problem would be obvious. but perhaps not
Reply
·
klasa wolna
a fuse,ahn? better make sure your fuse is good; hell,why not use 2 fuses in line? one on each end;
Nice vid, i just wish i had problems that made me rich...
Tu deltonnne
Just another over-engineered screw-up by Honda. Just give us a manual choke which works every time and forever. Instead, just an expensive stupid way to do something otherwise very simple. It's a $75 part! But nice job on the video.
Good knowledge to have but holy crap you over explain everything and talk way more then you need to
We try to reply to these Good BUT... comments with this:
You probably won't enjoy the other 700 videos on hear that have students in the background, as these are for students in training. If your looking for SHORTER direct videos make sure the video length is short and no one else is in the video. Be mindful to the community here and your welcome to be here.
If ever looking for technical help or a business collaboration call him directly @ (602) 345-0432
Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench
Thank you in advance for giving back! He looks forward to working with you directly!
Admin-H2W