I must say, I have the pit bike with that engine, and it STINKS! the motor constantly was falling to pieces. If you ever build a motorized bike, please don't use this motor, save yourself a headache.
@John Brier I've been wondering about that, thinking a strong rider of a pedal bike going up a steep hill, and standing up on the pedals, puts out quite a bit of torque; and never worries about the chain failing under those circumstances. (At least, I don't.) So the engine only applies the torque needed to move/accelerate the bike and rider, which wouldn't make us worry about the chain if the rider were applying the same force to the chain. Do the bicycle chains often fail under engine torque?
@@stephenandloriyoung5716 So many things wrong with this build. A bicycle chain won't last long with the constant torque of the engine, and the gears won't either. Plus those sprockets can make it go way past anything safe and the derailleurs will disintegrate. Also you would have to use all the gears gradually to get up speed and the speed he clocked had no load, not realistic at all!
My respects to you bro, the net you raffled off with the electronic ignition and with the gear changes, the net if you search on RUclips there is no other video where they do the same, you are the only one
@@ShortCrypticTales yea and where is the starter dude? I saw the relay and the ignition switch and there is something else left, the starter motor. You can't physically wire the engine up with some wires and hope it works. It's a f*cking patent you cant do this bc there is no starter on these 50cc engines, he just wired up the relay for the starter and while it clicks it tricks you into thinking it crancks up
Bet, I'll probably do this to my old mountain bike! If I remember correctly it has 6 gears and 3 big gears where the pedals are at, I could still reuse them for the motor right?
drill press, vice, welder and hand tools. without these good luck even though its not too difficult to do. but these tools are a must or it aint happenin!
Tremenda quedo me encanto el sistema de cambios que supuestamente frizaba los 99 km/ h (una bestialidad para una bicimoto) y me gusto mucho el arranque electrico
Hello my friend, first of all thank you for your useful video. I have a 49cc 4-stroke motorized bike. I want to connect the ignition coil to the battery just like you. Can it be connected to this engine? I don't know how many volt batteries are needed. Can you help? Thanks.
FELICITACIONES... También quiero aplicar tu idea pero sin sacrificar los pedales y colocar el motor en la parte trasera. donde puedo conseguir esos motores de 49cc. soy de Lima Perú. Te lo agradeceria.
Check your states rules. In Utah, the moment you change the motor drive to a multi gear setup it becomes a motorcycle. Same goes for removing the petals. That mean, a motorcycle license, insurance, and license plate. Now if you keep the petals, you can have the petal side be a multi gear, but the motor drive side must be a single speed to stay a bike.
I tried to make one too without welding, but nah. The gear ratio were horrible. I had a less than one gear ratio and the sprocket was probably bent too. It could have worked though. I plan on building a motorized bicycle trailer. That way I can get power both me and my motor and put it on an off road bicycle. I hope I can post a video on it soon.
These CAG engines are so superior to use on a motored bicycle! The re coil start and clutch make so much more sense.The only down side is the extremely poor mounting holes that just won't take much abuse and require rubber washers and very careful torque to avoid snapping chunks of the motor case with the bolts along with them. Lots of performance parts for these little screamers!
Yes I’m building one just now these engines are great to use once the carb has been charged and stronger clutch springs these engines also last a bit longer with the cooling shrouds extended I’ve had the 80 and 100cc engine kits you can buy to fit straight onto a bike in the past but the reliability of those engines are poor I’m keen to see how this engine holds up on my bike when it’s built
Basically it is called Luna, which in India 80's and 90's mens use to ride, but 60cc with 2 seater capacity, chassis bit heavier, and one thing, pedals were there to start the vehicle by holding clutch and few pedals, leave the clutch, here we go, ur luna is ready for a ride, when run out of fuel or some issues, pedals use to help riding it. This guy have removed the pedals, the whole video is super excellent awesome, but no pedals means, any issue arrives, u need to push all the way.
Thanks for the video everone, very nice, keep up the great work everyone ,hope to see An off road video of how it, pulls at low speed ,on light grade Trails. Go 2stroke Keep up the great work everyone ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆
Looks like some good work to me. Never seen an electric start on one of those bike motors. I hope your braking system is s good or better than you motor and and gearing system!
the song sounded like a broken fan plus the grinder sounds were like razor blades in my ears. The exauhst pip is still gonna fall off. they always do. and i usually share why they do and how to fix it. not this time. good luck
@@filipotv en el Video donde dice que hacer cuando no prende el motor ,en ese tipo de motor se le puede poner arranque eléctrico,gracias por su respuesta
That is almost exactly the same setup I used on my 1st build but with a go-ped engine. After lots of test rides and pushing it home very occasionally, version 2.0 i kept the ability to pedal home 🥴
It'll do maybe 40 mph with a person on it. Tall gear ratios are great, but without the horsepower to get the rpms up in that gear, you can only go so fast. Nice build though. Those pb motors have pretty decent power and sound good when they rev too.
Filipo, I'm sure you've been asked before but here goes anyway. Would you consider building one for someone at a hopefully reasonable price. Please respond as soon as you can. Thanks. BTW, I'm also a subscriber.
Очень интересно сколько проживут велоцепи и звезды под нагрузкой? Километорв 100? What resourse of chain and sprockets in real riding? One hundred kilometer?
Bella invenzione, peccato che questi cosi fatti veicoli per legge non possono circolare su strade pubbliche, altrimenti dovrebbero essere omologati, ciò vuol dire che devono essere targati e assicurati e per essere omologati non solo bisogna pagare ma un tim di ingegneri deve dare l' approvazione specialmente per quello che riguarda l' affidabilità e la sicurezza
i wouldnt even bother with the front derailer. that can get stuck jam up! i would rather have all gearing on the back wheel. put the chain on the medium or middle sprocket. take out the front derailer system.
@@jaydangier1110 you're right like I said before I can't understand why they don't do that every time they put a motor on bicycle you'll get a lot more power and speed from using the gears.
First motorised bike I've seen using a pocket bike motor. Nice job....
Manik
On vendre sa svp où
I must say, I have the pit bike with that engine, and it STINKS! the motor constantly was falling to pieces. If you ever build a motorized bike, please don't use this motor, save yourself a headache.
Me to
I cant find someone doing it legal! (Keeping the pedals)
Thats the approach no one does! connect the engine to the pedal cranck so you can still use the gears! Respect!
Good. Video
That’s awesome that you converted it to the peddle chain so that it has a multi speed gearbox 😎👍
Haha pubgmobile
PABLO ESPINOSA 😂😂😂
@John Brier I've been wondering about that, thinking a strong rider of a pedal bike going up a steep hill, and standing up on the pedals, puts out quite a bit of torque; and never worries about the chain failing under those circumstances. (At least, I don't.) So the engine only applies the torque needed to move/accelerate the bike and rider, which wouldn't make us worry about the chain if the rider were applying the same force to the chain. Do the bicycle chains often fail under engine torque?
@@stephenandloriyoung5716 So many things wrong with this build. A bicycle chain won't last long with the constant torque of the engine, and the gears won't either. Plus those sprockets can make it go way past anything safe and the derailleurs will disintegrate. Also you would have to use all the gears gradually to get up speed and the speed he clocked had no load, not realistic at all!
@@georgelackey622 the sprocket should be on the rear wheel like all of these motors. If you can’t pull the clutch you are always in gear in essence.
That tiny bike chain is screaming for help
Yes I thought the same thing when I saw it bouncing like that
It ll do job
🤣
@@michaelduresky3728 iutubfilme
Quality chain lighter than clunky 415
Vero cool! Finally i see someone Who use the original bike gears, that's fantastic.
My respects to you bro, the net you raffled off with the electronic ignition and with the gear changes, the net if you search on RUclips there is no other video where they do the same, you are the only one
I knew this was gonna be good when he didn't even take the paint off were he was welding
Elijah Beddoe Whitfield why should you need to the weld can go though the metal so why not paint
@@keeganhache6667 welding on a non clean surface creates impurities
He used them farm rods and shut that shit down hahah
Meh. Give er enough amps and she'll stick
It's mig, it doesent need to be pretty to hold. And this is not something that needs to hold more than 10kg's. But yeah, i was thinking the same
I never knew you could do electric start with these lol great video
you cant, the red button is a killswitch
@@alexakys__ you obviously did not watch the whole vid before commenting
@@ShortCrypticTales you obviously don't know how a electric starter works. There is no starter in this engine and if there is its been patented
@@alexakys__ he set up the keyed ignition cylinder and inserted key at 10:45 dang you are a dope
@@ShortCrypticTales yea and where is the starter dude? I saw the relay and the ignition switch and there is something else left, the starter motor. You can't physically wire the engine up with some wires and hope it works. It's a f*cking patent you cant do this bc there is no starter on these 50cc engines, he just wired up the relay for the starter and while it clicks it tricks you into thinking it crancks up
Bet, I'll probably do this to my old mountain bike! If I remember correctly it has 6 gears and 3 big gears where the pedals are at, I could still reuse them for the motor right?
yes but if the motor is too strong you might need to replace them with a stronger material
drill press, vice, welder and hand tools. without these good luck even though its not too difficult to do. but these tools are a must or it aint happenin!
Tremenda quedo me encanto el sistema de cambios que supuestamente frizaba los 99 km/ h (una bestialidad para una bicimoto) y me gusto mucho el arranque electrico
Ggood work Man, shame everyone uses these crappy cheap bikes for a project, still a very nice project. Well done.
Great job, but I have a question, does the engine overheat?
سلام دوچرخه خیلی خفن شد دمت گرم
What size sprocket is the one you put on I can't seem to find one that fits the chain that came with the motor I bought please help thank you
Hello my friend, first of all thank you for your useful video. I have a 49cc 4-stroke motorized bike. I want to connect the ignition coil to the battery just like you. Can it be connected to this engine? I don't know how many volt batteries are needed. Can you help? Thanks.
какую скрость развивает по прямой ?цепи часто меняете?
Hola, q tal te ha ido con esta adaptación del motor 49cc a la Bici, tengo un motor igual quiero ponerlo en la bici q es un 28".
I have the 49cc 4 stroke bike engine kit, I busted the gear reduction box and bought the t8f one and plan to do this same thing
Glad I found this video because I couldn't solve the problem of connecting the t8f sprocket to the bottom bracket.
So you removed the pedals and made it into to a jack shaft
Haha not a bicycle anymore
I came for the build but stayed for the shirts off rave music 😎
Thats a nice and strong welder!!! I need a good wire feed!
Pretty cool....but man....that derailleur is about to explode with the chain moving at those speeds lol...
... молодец парень!-, отличный получился мопед, только движок нужно было ставить Ф-100 и бензобак с задним расположением под багажником!!!
А этот моторчик не лучше??
какая мощность у Ф100 и у этого?!!
ЛС
FELICITACIONES... También quiero aplicar tu idea pero sin sacrificar los pedales y colocar el motor en la parte trasera. donde puedo conseguir esos motores de 49cc. soy de Lima Perú. Te lo agradeceria.
esos motores son de cuidado el carburador se ensucia rapido ,donde venden cuatrimoto por grau donde venden bicicletas .
@@filipotv Gracias por las recomendaciones... y Estaremos atentos en tu próximo proyecto..
Why didn’t you use the muffler flange you cut off ?
so does it charge up the battery aswell? does it use cdi ? i need diagram
This is exactly the way I wanna do it, so I can keep my gears
No pedals= ticket! Pedals are what keeps the bike exempt from registration. Just use a jack shaft kit to keep your gears.
Check your states rules. In Utah, the moment you change the motor drive to a multi gear setup it becomes a motorcycle. Same goes for removing the petals. That mean, a motorcycle license, insurance, and license plate. Now if you keep the petals, you can have the petal side be a multi gear, but the motor drive side must be a single speed to stay a bike.
You can buy jackshaft kit for the 70cc kits to keep gears but its risky using the stock bike drive train cause way less reliable with a smaller chain
How many tooth sprocket is used upfront ?
These things are fun! I got a Schwinn bicycle with a 49 mL motor attached to it I did a headlight and a electronic rear deflected for $300
I tried to make one too without welding, but nah. The gear ratio were horrible. I had a less than one gear ratio and the sprocket was probably bent too. It could have worked though. I plan on building a motorized bicycle trailer. That way I can get power both me and my motor and put it on an off road bicycle. I hope I can post a video on it soon.
Esse motor já vem com esse sistema de partida ou e ideia sua
hola amigo que estudiastes para relizar tremenda bellezas?
I have ridden off road, on foot (petal) well over 20,000 miles through Los Angeles dirt roads with my neihbor ...
Can a bike chain fit in the engine transmission gear or does it need a special chain
Só podia ser americano mesmo ,muito boa ideia fica motorizado é mantém as marcha.
man if you started selling the mounts you would make bank
These CAG engines are so superior to use on a motored bicycle! The re coil start and clutch make so much more sense.The only down side is the extremely poor mounting holes that just won't take much abuse and require rubber washers and very careful torque to avoid snapping chunks of the motor case with the bolts along with them. Lots of performance parts for these little screamers!
Yes very nice engines. The mounting points are poor yes but for only 50 bucks i cant complain
Yes I’m building one just now these engines are great to use once the carb has been charged and stronger clutch springs these engines also last a bit longer with the cooling shrouds extended I’ve had the 80 and 100cc engine kits you can buy to fit straight onto a bike in the past but the reliability of those engines are poor I’m keen to see how this engine holds up on my bike when it’s built
Basically it is called Luna, which in India 80's and 90's mens use to ride, but 60cc with 2 seater capacity, chassis bit heavier, and one thing, pedals were there to start the vehicle by holding clutch and few pedals, leave the clutch, here we go, ur luna is ready for a ride, when run out of fuel or some issues, pedals use to help riding it. This guy have removed the pedals, the whole video is super excellent awesome, but no pedals means, any issue arrives, u need to push all the way.
Buen video, tu sistema de arranque se puede poner al otro motor 2 tiempos? Al 80cc se puede poner ese tipo de arranque?
Eso mismo iva preguntar!!!!
Alguien sabe
Where did you buy the motor? I really need that electric start
thanks, today I built it
35381
Quantas cilindradas tem esse motor? Esse motor é 49cc?
sim, 4 tempos 49cc
2 tempos
@@SionX.007 2tempos!!
Parabéns Mano vc é muito caprichoso nesse vídeo mas para ficar 100% faltou vc dizer a marca desse motor, valeu..
Importway
Motor de mini moto 49cc
How you start the engine from battery???🤔🤔🤔
Thanks for the video everone, very nice, keep up the great work everyone ,hope to see
An off road video of how it, pulls at low speed ,on light grade
Trails. Go 2stroke
Keep up the great work everyone ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆
Can you do video on how to install starter on pocket bike engine. I need to know how you install it on pocket bike engine. Thank you.
Looks like some good work to me. Never seen an electric start on one of those bike motors. I hope your braking system is s good or better than you motor and and gearing system!
U can buy an electric start part for them
it seems that he has cvt
Cuantos km/h te da con.ese motor.d 50cc ? Yo de nuevo molestandote en otro video tuyo.me.gustan tus proyectos..saludos
Very creative good job be safe 🚲💨
Look Mom!
No brains!
Here. Hold my beer.
how many liters of gas .. 2L or 3L
Great job it goes fast.
Yeh the bike chain isn't gonna last.
Great Fab work though.
How many hours ? Im prob. gonna do it for a school project
have this engine on Aliexpress?Which engine model makes?
Why change rear sprocket?
hello there is how much How much speed does it reach with a person riding it
That guy is DREAMING! 49cc motor on a bicycle might go 40 mph tops. All those gears look sweet but 2 HP can get going only so fast.
How does the electric start work on these engines?
A small starter motor bolts up where the string pull start pully sits. Extra battery weight and starter motor will slow you down.
Filipo y así cuanto peso soporta y a q velocidad puede ir ????
How did you make the big hole in the exhaust
Tried to build a metal gas tank for motorized bicycle I think that will be a good idea 😉😉😊😁
Can you tell me the chain type for it and the big sprocket type?
How fast is the bike?
What gear my friend..???
what type brake you use
Muito bom gostei muito no motor 80cc nao da para mudar de marchas e nesse 49cc da e melhor ma subida fica mais leve anda mais eu nunca pensei nisso
quantos tempos esse motor do video?
the song sounded like a broken fan plus the grinder sounds were like razor blades in my ears.
The exauhst pip is still gonna fall off. they always do. and i usually share why they do and how to fix it.
not this time. good luck
Muito top seu projeto de bicicleta motorizada mano 👍👍
Hey brother tiene algún número para hubicarte
Também gostei muito
Muito louco 😛😛😛
Cuantos km te da x tanque?
Genial el Video ,una pregunta para todos los motores estacionarios se puede utilizar esa forma de encendido electrico
no .tiene q tener arrancador,hay motores stacionarios q tienen arrancador
@@filipotv en el Video donde dice que hacer cuando no prende el motor ,en ese tipo de motor se le puede poner arranque eléctrico,gracias por su respuesta
no se puede tiene q venir el motor con arrancador
@@filipotv gracias
Me gustan tus vídeos me estoy animando a armar uno
Very nice build 👍👍 👍💪💪
That is almost exactly the same setup I used on my 1st build but with a go-ped engine. After lots of test rides and pushing it home very occasionally, version 2.0 i kept the ability to pedal home 🥴
WTF
It'll do maybe 40 mph with a person on it. Tall gear ratios are great, but without the horsepower to get the rpms up in that gear, you can only go so fast. Nice build though. Those pb motors have pretty decent power and sound good when they rev too.
Ain't gonna reach over 27mph cause the 70cc kits go 34mph stock
Filipo, I'm sure you've been asked before but here goes anyway.
Would you consider building one for someone at a hopefully reasonable price. Please respond as soon as you can. Thanks.
BTW, I'm also a subscriber.
I can build for you if you want. Already sold few.
where to buy the engine?
What gear my friend..🙏🙏🙏
Hola, que buen video, nuevo suscriptor, quedo muy hermosa la Bicimoto, quisiera saber si haces para vender amigo¿?
Si ases para vender
@@jeffersonrubio7162 ¿?
@@jeffersonrubio7162 como le compro hay un link
দারুন আজাইরা কাম! জোস আজাইরা জিনিস!
Nice i like you from Mexico i se
Auto analiza
Very informative video, keep up the good work!
Qué tipo de arranque es?
How much Horse Power does the engine have?
Have you ever fried your leg on a mini bike ?...
....me neither...
I need full kits.what will be the price
Yeh konsa oil he..bhai mitti ka tel he kya
Очень интересно сколько проживут велоцепи и звезды под нагрузкой? Километорв 100?
What resourse of chain and sprockets in real riding? One hundred kilometer?
what is the name of that fist that accelerates and turns off
Напишите пожалуйста стоит такой мотор покупать?и надёжней ли он?
Bella invenzione, peccato che questi cosi fatti veicoli per legge non possono circolare su strade pubbliche, altrimenti dovrebbero essere omologati, ciò vuol dire che devono essere targati e assicurati e per essere omologati non solo bisogna pagare ma un tim di ingegneri deve dare l' approvazione specialmente per quello che riguarda l' affidabilità e la sicurezza
y a cuanto vendes la bicimoto, en que parte de Lima esta? saludos buenos videos
filipo tv y sites la bicikleta 👍👍👍👍 tueres el mejor del mundo ✌😎✌😂😂😂
grasias
i wouldnt even bother with the front derailer. that can get stuck jam up! i would rather have all gearing on the back wheel. put the chain on the medium or middle sprocket. take out the front derailer system.
That is how you put a motor on a bicycle it works a lot better than putting the sprocket on the back wheel.
But he gets the advantage of multiple gears
Plus at this point its not a Bicycle its a budget motorcycle
@@jaydangier1110 you're right like I said before I can't understand why they don't do that every time they put a motor on bicycle you'll get a lot more power and speed from using the gears.
Ima try this next
Wow thes is very nice
Wow thes is very nice 👏💞💝💟👍
Verry good
What is the maximum speed bro
Where are u from man ?
Donde puedo encontrar un motor así en lima, alguna recomendación???