It looks like a nightmare to take this scooter apart my friend, so many screws and clips. And then you’ve got to put it all back together again. Your very skilled man, thank you so much for showing us all how to do it 🤙🏻
URGENT! For the rear tire change can I just remove the bottom plastic and remove the rear tire or do I need to remove the top plastic as well as bottom?
It should be enough to remove the bottom grey cover to get to the axle nuts holding the rear tyre in place as seen here ruclips.net/video/2GT5LiTJ8D8/видео.html If you have a flat though, I would first try to repair it with a tubeless tyre plug kit and you won't have to remove the tyre.
My won't turn on now,i left it outside on balcony thru winter time. Maybe is cold weather or something. When i pressed the button to turn it on it showed screen displayed for 2 seconds and then shut it itself. I try to charge it and no response on screen or sound. I wonder what's wrong with it.
Its possible the battery has discharged completely in the cold over long winter period. But hard to say for sure. Try to contact NIU to see what they say.
Asking about speedlimiting, i know the limiter is in the software but... This might be stupid thing but have anyone tested if you try another lcd screen on niu kickscooter like s866 (programmable lcd) can you set new parameters in and tune speed and current limiting with another lcd computer or is it just the controller that sucks. 🤣 Just wondering if there is something little different lcd screen with niu when they program the controller from factory like eu or us.. meaning if they just use different lcd screen on the factory when they do the parameters with multiple buttons and then put the "original" sceen on it and sell them..? Maybe i just order 1000w aftermarket controller and forget all these thinking and pain 😅 sorry for the unclear explanation
At the top edge its about 9cm x 10cm and 7cm deep, but it narrows as you go down the metal tub, so to be on the safe side I would go 7.5cm x 9cm. I can measure it in more detail in my next video on the back fender replacement.
Not sure, as I haven't tried replacing a battery, but if you mean settings such as your ride statistics, I think those are stored by the controller and probably the NIU app in your NIU account, that is at least my guess :)
@@owenchupan3032 Not sure what Bluetooth or other settings should change. The scooter just connects to the app automatically, the battery change should not affect any settings. If you changed something like the controller that would likely mean you would need to link the scooter again with your Phone.
I’d like to know if it’s possible to hide and connect a gps locator to the battery, for example. But I’m afraid I won’t be brave enough to do that even if it was possible! 😅 Luckily this video gets to repair shops everywhere!
Not sure if its possible. I am sure someone with experience with scooter modification will try it eventually. But if you don't have the necessary expertise I would not recommend messing with the scooter electronics.
Unfortunately I don't think there is a way to activate it on the German firmware, because of the legal requirements that do not allow such lights in DE.
hi i have a question after removing the griptape and the plastic beneath it the additional cover doesnt bring a plastic one is there any place i can buy these plastic tape or is not needed ?
You should be able to order it as a spare part from NIU. In EU you can order parts from niu.b2x.com/ In US global.niu.com/aftersales If they don't have the part listed fill out the form on the site and they should get back to you.
I will definitely consider doing guides for other parts of the KQi2. I do mention the rear tire change a bit; to get to the nuts holding the tire in place you will also need to remove the bottom plastic cover which is held in place by 6 allen screws from the bottom. After that it should be the same as on any other scooter.
Hi, its a PH1 screwdriver from a set like this www.amazon.com/dp/B0C1JXWY8N/ wrapped in rubber anti-slip mat; but its not the best option, a better alternative would be some sort of L shaped driver.
Thank you for the great video my friend. I’ve Hurd the Blue Wire coming out of the controller is the speed limiter wire and if you unplugged it/ cut it it will increase the top speed of the scooter 🛴? Is this true?..
You can get any spare parts you need from shop.besender.com/store/ if they don't have some parts listed, you can fill out a form niu.besender.com/form and they will send you a quote for the parts you need. If you are still under warranty use the same form to get your scooter fixed.
Glad you liked it. Not planning to do a tyre change video, until I have to. On tubeless tyres if you get a small flat its easier to use a tyre plug kit (as used for car tyres) to fix it rather than changing the whole tyre. As for wheel removal, that should be straight forward, for the back one just remove the bottom black plastic cover in addition to the top cover, as I mentioned in the video, and you should get full access to the rear axle nuts. For the front wheel you need to remove the reflective stickers, and remove the screws to get to the big axle nuts to remove the wheel. I plan on doing a repair video on the error03 issue with the throttle, which will involve dissembling the display and getting the throttle off the handlebars.
Not related with the video but do we have on KQi2 pro the Cruise mode? I'm not sure if it's only a feature that it's on KQi3 pro or if it's only available on US. Great video tho!
Cruise Control is available on the KQi2, but not in the EU. The International/US model has it enabled afaik. But due to restrictions in some EU countries NIU and other scooter manufacturers like Segway have disabled this feature in Europe. I hope NIU brings it back in countries where its not specifically restricted, or when you use your scooter on private property.
Error 33 is the "Battery open-circuit or imbalance warning". I hove not come across this error myself so not sure what might be causing it. I would recommend trying to reach out to NIU and see if they have any suggestion on what to try. My guess would be, if you haven't used the scooter for a year the battery might be too depleted for the scooter to start.
You should be able to order it from NIU, go to niu.com scroll to bottom click on after sales, click on scooter and ebike, select region and it will get you to a page where you can request a quote for spare parts. In EU you can go to niu.b2x.com in US shop.besender.com/store
which controller wires are used? i want to try the NIU KQi2 Pro with Xiaomi Controller and maybe new display Controller Cable is 5 PIN waterproof, like Xiaomi ... Battery is XT60
Hello. My charge doesn't charge the scooter, tried to separate issues: charger work good, first green, when connect to scooter turns red. Scooter doesn't turn on. So I see the problem in connection or in battery (that might be gone to security mode). Did you faced to this kind of problem?
No, unfortunately I did not come across a problem of the scooter not charging at all. Not sure what might be causing it. The fact that the charger turns from green to red when you plug it in should indicate the scooter is charging. If it is not, you might have to contact NIU over at Global-Service@niu.com to see if they have any suggestions to try.
I need some help. It was working in the morning but all of the sudden when i was getting ready to go home it wouldn’t turn on. I pressed the power button and it won’t turn on. It charges fine but this is my issue. Have any idea how to fix this
If there is no error and the scooter is not responding at all, it might be an issue with the button itself or some other internal hardware problem. Its hard to say what might be causing it without further diagnostics. In this case it will be best to contact NIU support for help as they have the tools to properly diagnose these sort of problems.
Maybe in the future. I currently only have the KQi2 from NIU for review and testing. I wanted to first review this model because its one of the best options in the €500 price category and many people are often asking for the best cheap scooter to get.
What a pain though just to change a tire lol but I guess it really would’ve t take too long to do this just have to keep the screws stood up like you have them in the places they go or came from.
Once you know how to do it its not really that hard. Just a lot of screws and you need to be careful not to damage the grip tape/plastic board when you unstick it from the deck. :)
Ah okay thank you I was afraid to just do this because I don’t want to break anything it’s a nice scooter. But now I know a lot better I just get paranoid you know mess up on thing like a wire or drop something in there and it may ruin it.
Thanks. There is no speed limiter to disconnect, the speed limit is programmed in the controller firmware, afaik. On scooters that are controlled though a mobile app (e.g. Ninebot Max), you need to change the firmware to unlock the speed, and so far on the NIU that is not possible as far as I know. You can ask NIU about it, the hope is they will find a legal way for users to be able to unlock the scooter speed when they use it on private land or in countries where higher speed is allowed.
@@Lantea13 thank you for your informative informations, Really helps us a lot of time and energy, I will try to contact NIU on my end to see if there’s a way to unlock the speed
You can order spare parts from NIU service partner at shop.besender.com/store/ if the part you need is not listed fill out this form niu.besender.com/form and they will reply to you with the cost of the parts you need.
So I order the controller box and replaced it rode it a day and it died on me placed it on charger for 2 hours battery pack turned green..tried to power up now it won't turn on
@@sherees29ify Hi, just noticed your reply now. Not sure what might be causing it, and why it died on you after it worked for one day. What was the issue with the first controller? Was there any error codes before it died the second time? If you are sure everything was done correctly, it might be best to contact NIU support and see if they have any ideas what might be causing the issue.
You can order spare parts from NIU service partner at shop.besender.com/store/ if the part you need is not listed fill out this form niu.besender.com/form and they will reply to you with the cost of the parts you need. Also just curious, what happened with your battery that you need a new one?
Hola amigo , tengo un patinete NIU KQi3 que por no darle uso se ha descargado totalmente la bateria y no consigo hacer que cargue , segun me he podido informarme , es por que la bateria a entrado en modo de seguridad o reposo . Me comentan que con un cargador directo, no el original , se puede desbloquear . Sabrias tu decirme algo por favor ? un saludo
Hello, sorry I am not sure what the best process is for reviving a completely discharged battery. I have not deat with such a problem so far. I know it is possible to revive the battery, but in this case it would be best to ask NIU support to tell you what the process is for the KQi3.
My niu kqi2 randomly wont turn on. The battery charges but the scooter will not power up. Disconnected and reconnected the battery but still not working. Anyone got ideas ?
I had this happen on my review KQi2 as well (main reason why my final review is delayed so much). If the battery re-connect does not work you need to send it for repair unfortunately, or ask NIU to send you a replacement controller and replace it yourself, since you already had the scooter opened up, you already did the hard part :) I heard back from NIU about the problem, and it was related to soldering of some components on the controller. They are taking new precautions and putting extra quality control steps in place so this should no longer happen in the future.
That would be nice for riding on private land or in areas where higher speed is allowed. I hope NIU comes up with a solution themselves that would allow them to comply with EU laws on speed limits and cruise control, but also enable them to have a direct option in the NIU app to unlock the speed and features such as cruise control when the user agrees its for use on private property and takes full responsibility for the unlocks. That way NIU is covered and users get more options in using their scooters. However not sure if legally such option is possible in all EU countries. Alternatively maybe the community comes up with a solution as they did for some other scooters, but personally I would prefer an official way to unlock the speed and advanced options.
i have saw that in some electric scooters if you disconnect a cable in the controller it unlocks the speed limit, have you tried disconnecting some of those? thx in advance! edit; I was referring to this video ruclips.net/video/2xCcfLr-vmc/видео.html
That's not how it works with scooters such as the NIU KQi2 or other scooters such as the Segway Ninebot Max. On these scooters that are controlled though a mobile app, you need to change the firmware to unlock speed, and so far on the NIU that is not possible as far as I know. You can ask NIU about it, the hope is they will find a legal way for users to be able to unlock the scooter speed when they use it on private land or in countries where higher speed is allowed.
What if you disconnect the speed sensor? Obviously you won't see any speed in the display anymore. But does it still run? (with unlimited speed). Or doesn't it run at all without speed sensor?
@@newenergy8994 What speed sensor? AFAIK there is no way to just disconnect some wires to make it go faster or ignore the controller firmware that is determining all functions of the scooter. Take a look at how people make modification on the Ninebot Max to get an idea what might be required, but nobody has tried custom firmware on the NIU afaik.
Did you try and ask them if you can buy a replacement battery and they refused to sell you one? If that is the case I would be interested to look into this further. If you can post a copy of your communication with NIU I will be happy to ask them about it myself.
Don't buy it for 600 euros thrown away....... In 6 months I have sent it 4 times to Germany for repair, they don't have points in Italy for repair. They don't speak Italian, but Italian money is convenient for them. Unreliable people and poor product. With the old xiaomi scooter, not all the failures I encountered on this scooter had happened to me. Bought on 11/26/2022 and in July 2023 it broke for the 4/5th time because in the last ticket, in addition to the second breakage of the ignition button, error 03 was added to the accelerator. Buy other brands.
What are you talking about, you can order spare parts direct from NIU over at niu.b2x.com/shop or contact NIU directly at Global-Service@niu.com Also there is no need to spread lies about comment deletion, your comments will not be deleted unless they are vulgar or use language that breaks YT terms of service and are automatically deleted by RUclips moderation.
It can be a bit tricky to change the tyres, but unless the tyre is severally damaged, you can try using a tubeless tyre plug kit to repair any punctures without taking the tyre off the rim. You might also find these videos by @ScootLetsGo useful ruclips.net/video/bX0P59Ir0G8/видео.html ruclips.net/video/sAZnTLp2qWM/видео.html
It looks like a nightmare to take this scooter apart my friend, so many screws and clips. And then you’ve got to put it all back together again. Your very skilled man, thank you so much for showing us all how to do it 🤙🏻
What a design, made to make a hell to access the inside of the scooter for sure
What a nightmare to get to the controller! But a Great, in-depth video, keep up the good work 👍🏻
Great video thank you
URGENT! For the rear tire change can I just remove the bottom plastic and remove the rear tire or do I need to remove the top plastic as well as bottom?
It should be enough to remove the bottom grey cover to get to the axle nuts holding the rear tyre in place as seen here ruclips.net/video/2GT5LiTJ8D8/видео.html
If you have a flat though, I would first try to repair it with a tubeless tyre plug kit and you won't have to remove the tyre.
@@Lantea13 Thanks, I tried multiple times to patch tire with tubeless plug but unfortunately it's not working well. I even tried the tire sealant.
My won't turn on now,i left it outside on balcony thru winter time. Maybe is cold weather or something. When i pressed the button to turn it on it showed screen displayed for 2 seconds and then shut it itself. I try to charge it and no response on screen or sound. I wonder what's wrong with it.
Its possible the battery has discharged completely in the cold over long winter period. But hard to say for sure. Try to contact NIU to see what they say.
Asking about speedlimiting, i know the limiter is in the software but... This might be stupid thing but have anyone tested if you try another lcd screen on niu kickscooter like s866 (programmable lcd) can you set new parameters in and tune speed and current limiting with another lcd computer or is it just the controller that sucks. 🤣 Just wondering if there is something little different lcd screen with niu when they program the controller from factory like eu or us.. meaning if they just use different lcd screen on the factory when they do the parameters with multiple buttons and then put the "original" sceen on it and sell them..? Maybe i just order 1000w aftermarket controller and forget all these thinking and pain 😅 sorry for the unclear explanation
What is the dimensions where the factory controller is? Thinking of replace the controller 😁
At the top edge its about 9cm x 10cm and 7cm deep, but it narrows as you go down the metal tub, so to be on the safe side I would go 7.5cm x 9cm. I can measure it in more detail in my next video on the back fender replacement.
Great video! I need to replace my battery I was curious after removing the battery and installing a new one will all the settings reset?
Not sure, as I haven't tried replacing a battery, but if you mean settings such as your ride statistics, I think those are stored by the controller and probably the NIU app in your NIU account, that is at least my guess :)
@@Lantea13 I was referring to like the Bluetooth settings and etc
@@owenchupan3032 Not sure what Bluetooth or other settings should change. The scooter just connects to the app automatically, the battery change should not affect any settings. If you changed something like the controller that would likely mean you would need to link the scooter again with your Phone.
@@Lantea13 thank you for this information!
Where do u get a new battery for the NIU kqi2?
I’d like to know if it’s possible to hide and connect a gps locator to the battery, for example. But I’m afraid I won’t be brave enough to do that even if it was possible! 😅 Luckily this video gets to repair shops everywhere!
Not sure if its possible. I am sure someone with experience with scooter modification will try it eventually. But if you don't have the necessary expertise I would not recommend messing with the scooter electronics.
@@Lantea13 Nope! Never ever. Too much electronics and little mechanics is a good warning to be far from it. Thanks 😊
thank you for doing this. I have the KQI3
Hello, in German version the Halo light is not working. Is there a possibility to activate it without flash and use the US/EU Software?
Unfortunately I don't think there is a way to activate it on the German firmware, because of the legal requirements that do not allow such lights in DE.
Do you know what brand are the cells?
Sorry, I don't. But I found this video a while back where you can see the cells and BMS ruclips.net/video/a3VOHHjGM0s/видео.html
hi i have a question after removing the griptape and the plastic beneath it the additional cover doesnt bring a plastic one is there any place i can buy these plastic tape or is not needed ?
You should be able to order it as a spare part from NIU.
In EU you can order parts from niu.b2x.com/
In US global.niu.com/aftersales
If they don't have the part listed fill out the form on the site and they should get back to you.
next one rear tire replacement?
I will definitely consider doing guides for other parts of the KQi2. I do mention the rear tire change a bit; to get to the nuts holding the tire in place you will also need to remove the bottom plastic cover which is held in place by 6 allen screws from the bottom. After that it should be the same as on any other scooter.
Hi! 🙂At 12:04, what type of screwdriver are you using there?
Hi, its a PH1 screwdriver from a set like this www.amazon.com/dp/B0C1JXWY8N/ wrapped in rubber anti-slip mat; but its not the best option, a better alternative would be some sort of L shaped driver.
Is there any type of replacement battery for the NIU kqi2?
I guess you could order a replacement from NIU, but I am not aware of any 3rd party compatible batteries. What happened to your original one?
Thank you for the great video my friend. I’ve Hurd the Blue Wire coming out of the controller is the speed limiter wire and if you unplugged it/ cut it it will increase the top speed of the scooter 🛴? Is this true?..
No that is not true, as far as I know. The speed is controlled by the firmware in the controller, not by a hardware limiter.
@@Lantea13 Ok, thank you so much for your reply, your a legend mate
How do you contact company for new controller. I have this same scotter with same problem
You can get any spare parts you need from shop.besender.com/store/ if they don't have some parts listed, you can fill out a form niu.besender.com/form and they will send you a quote for the parts you need. If you are still under warranty use the same form to get your scooter fixed.
Gran video gracias por compartirlo, podrías hacer otro de cómo se cambian las ruedas gracias
Glad you liked it. Not planning to do a tyre change video, until I have to. On tubeless tyres if you get a small flat its easier to use a tyre plug kit (as used for car tyres) to fix it rather than changing the whole tyre.
As for wheel removal, that should be straight forward, for the back one just remove the bottom black plastic cover in addition to the top cover, as I mentioned in the video, and you should get full access to the rear axle nuts. For the front wheel you need to remove the reflective stickers, and remove the screws to get to the big axle nuts to remove the wheel.
I plan on doing a repair video on the error03 issue with the throttle, which will involve dissembling the display and getting the throttle off the handlebars.
We want a video of connecting a theft alarm with battery
Any specific brands you would like to see tested?
Not related with the video but do we have on KQi2 pro the Cruise mode? I'm not sure if it's only a feature that it's on KQi3 pro or if it's only available on US. Great video tho!
Cruise Control is available on the KQi2, but not in the EU. The International/US model has it enabled afaik. But due to restrictions in some EU countries NIU and other scooter manufacturers like Segway have disabled this feature in Europe. I hope NIU brings it back in countries where its not specifically restricted, or when you use your scooter on private property.
Error code 33 after not using it for a year. Wondering if I need to unplug and plug back in the battery or if maybe something else is up
Error 33 is the "Battery open-circuit or imbalance warning". I hove not come across this error myself so not sure what might be causing it. I would recommend trying to reach out to NIU and see if they have any suggestion on what to try.
My guess would be, if you haven't used the scooter for a year the battery might be too depleted for the scooter to start.
By chance, do you know where I can source a replacement battery for my KQi2 Pro?
You should be able to order it from NIU, go to niu.com scroll to bottom click on after sales, click on scooter and ebike, select region and it will get you to a page where you can request a quote for spare parts. In EU you can go to niu.b2x.com in US shop.besender.com/store
Did u ever find a battery for your NIU Kqi2
@@jasonsamuel4110 unfortunately no
What Bar pressure should be both tires ?Tnx
Your tyre pressure should be between 45-50psi.
@@Lantea13 sorry for the question but,what is this in Bar?
45psi is 3.1bar
50psi is 3.4bar
You can use google for the conversion if you need it again for different values :)
which controller wires are used? i want to try the NIU KQi2 Pro with Xiaomi Controller and maybe new display
Controller Cable is 5 PIN waterproof, like Xiaomi ...
Battery is XT60
Check out this video ruclips.net/video/5mvcvItPYpw/видео.html to see more detailed shots of the controller wires.
Hello. My charge doesn't charge the scooter, tried to separate issues: charger work good, first green, when connect to scooter turns red. Scooter doesn't turn on. So I see the problem in connection or in battery (that might be gone to security mode). Did you faced to this kind of problem?
No, unfortunately I did not come across a problem of the scooter not charging at all. Not sure what might be causing it. The fact that the charger turns from green to red when you plug it in should indicate the scooter is charging. If it is not, you might have to contact NIU over at Global-Service@niu.com to see if they have any suggestions to try.
I need some help. It was working in the morning but all of the sudden when i was getting ready to go home it wouldn’t turn on. I pressed the power button and it won’t turn on. It charges fine but this is my issue. Have any idea how to fix this
If there is no error and the scooter is not responding at all, it might be an issue with the button itself or some other internal hardware problem. Its hard to say what might be causing it without further diagnostics. In this case it will be best to contact NIU support for help as they have the tools to properly diagnose these sort of problems.
what about kqi3 pro full disassembly and assembly??
Maybe in the future. I currently only have the KQi2 from NIU for review and testing. I wanted to first review this model because its one of the best options in the €500 price category and many people are often asking for the best cheap scooter to get.
I recently came across this channel ruclips.net/user/ScootLetsGovideos that has videos of the KQi3 disassembly that you might find helpful.
Do you think that by changing the eu controller of the niu scooter for a usa controller will unlock the speed limit ? Thank you
It's possible. I haven't seen anyone try it, but in theory it should work.
@@Lantea13 yes it does, I mod mine and im going at 28kmh flat
@@braisperez7332 Would be interesting to find out if a KQi3 controller or motor would work with the KQi2 battery and other internals.
@@Lantea13 if you replace it with a kqi3 controller, you would probably also need to change the display
What a pain though just to change a tire lol but I guess it really would’ve t take too long to do this just have to keep the screws stood up like you have them in the places they go or came from.
Once you know how to do it its not really that hard. Just a lot of screws and you need to be careful not to damage the grip tape/plastic board when you unstick it from the deck. :)
Ah okay thank you I was afraid to just do this because I don’t want to break anything it’s a nice scooter. But now I know a lot better I just get paranoid you know mess up on thing like a wire or drop something in there and it may ruin it.
Great video brother! Keep it up! Have you try to disconnect the speed limiter to see if it’s going to work? TIA
Thanks. There is no speed limiter to disconnect, the speed limit is programmed in the controller firmware, afaik.
On scooters that are controlled though a mobile app (e.g. Ninebot Max), you need to change the firmware to unlock the speed, and so far on the NIU that is not possible as far as I know.
You can ask NIU about it, the hope is they will find a legal way for users to be able to unlock the scooter speed when they use it on private land or in countries where higher speed is allowed.
@@Lantea13 thank you for your informative informations, Really helps us a lot of time and energy, I will try to contact NIU on my end to see if there’s a way to unlock the speed
@@209rc7 Any updates on this? Did NIU get back to you?
Can you please send me a link to where I can order the controller box
You can order spare parts from NIU service partner at shop.besender.com/store/ if the part you need is not listed fill out this form niu.besender.com/form and they will reply to you with the cost of the parts you need.
So I order the controller box and replaced it rode it a day and it died on me placed it on charger for 2 hours battery pack turned green..tried to power up now it won't turn on
@lanten13
@Lantea13 can you read my last comment forgot to hit reply
@@sherees29ify Hi, just noticed your reply now. Not sure what might be causing it, and why it died on you after it worked for one day. What was the issue with the first controller? Was there any error codes before it died the second time? If you are sure everything was done correctly, it might be best to contact NIU support and see if they have any ideas what might be causing the issue.
Where can I get a new battery? Or can I buy another one? If so, which one?
You can order spare parts from NIU service partner at shop.besender.com/store/ if the part you need is not listed fill out this form niu.besender.com/form and they will reply to you with the cost of the parts you need.
Also just curious, what happened with your battery that you need a new one?
Hola amigo , tengo un patinete NIU KQi3 que por no darle uso se ha descargado totalmente la bateria y no consigo hacer que cargue , segun me he podido informarme , es por que la bateria a entrado en modo de seguridad o reposo . Me comentan que con un cargador directo, no el original , se puede desbloquear . Sabrias tu decirme algo por favor ? un saludo
Hello, sorry I am not sure what the best process is for reviving a completely discharged battery. I have not deat with such a problem so far. I know it is possible to revive the battery, but in this case it would be best to ask NIU support to tell you what the process is for the KQi3.
So if you get a rear puncture, you basically have to go through all that removing griptape, etc, just to get the wheel off.
Pretty much, unless you can just patch it with a tubeless tyre plug kit. For that you don't need to remove the wheel or tyre.
I had a wreck recently, the scooter handle is now tilted slightly and does not align with the front tyre. How do I correct it??
Sorry, hard to say without actually seeing it. If its not broken, there should be a way to loosen the stem and align it back into place.
My throttle has become loose and now spins 360 and does not make the scooter go, there is a big error sign on screen and an 03
have you tried tightening the screw on the back of the throttle
Try to tighten the screw on the back, to fix error 03 see this video ruclips.net/video/6U0HE3f7d9M/видео.html
It shows me 03 error any idea what should I do?
That is a throttle problem error. Best to contact NIU to send you a new throttle if you can replace it yourself, or send the scooter for repair.
Next on sprockets
My niu kqi2 randomly wont turn on. The battery charges but the scooter will not power up. Disconnected and reconnected the battery but still not working. Anyone got ideas ?
I'm having the same problem
@@ElectricJazzcat Its annoying because Im in Canada so I have to ship it to them for repairs, gonna be months before I get it back.
@@ImQuaddin I hear ya
I had this happen on my review KQi2 as well (main reason why my final review is delayed so much). If the battery re-connect does not work you need to send it for repair unfortunately, or ask NIU to send you a replacement controller and replace it yourself, since you already had the scooter opened up, you already did the hard part :)
I heard back from NIU about the problem, and it was related to soldering of some components on the controller. They are taking new precautions and putting extra quality control steps in place so this should no longer happen in the future.
Wish they put those gaskets on the kqi3 max. The max is built so poorly compared to this one. One splash of water and the scooters done for
I find that hard to believe. The Max should be build just as well, imo. Maybe if I manage to get a hold of one I could do some videos on it as well.
كيف استطيع ازالة بلوك من دراجة
Can you be more specific, google translated it as "remove block from the bike" so not sure what part you are referring to.
Next one the speed limiter delete 😎
That would be nice for riding on private land or in areas where higher speed is allowed. I hope NIU comes up with a solution themselves that would allow them to comply with EU laws on speed limits and cruise control, but also enable them to have a direct option in the NIU app to unlock the speed and features such as cruise control when the user agrees its for use on private property and takes full responsibility for the unlocks. That way NIU is covered and users get more options in using their scooters. However not sure if legally such option is possible in all EU countries.
Alternatively maybe the community comes up with a solution as they did for some other scooters, but personally I would prefer an official way to unlock the speed and advanced options.
i have saw that in some electric scooters if you disconnect a cable in the controller it unlocks the speed limit, have you tried disconnecting some of those? thx in advance!
edit; I was referring to this video ruclips.net/video/2xCcfLr-vmc/видео.html
That's not how it works with scooters such as the NIU KQi2 or other scooters such as the Segway Ninebot Max. On these scooters that are controlled though a mobile app, you need to change the firmware to unlock speed, and so far on the NIU that is not possible as far as I know.
You can ask NIU about it, the hope is they will find a legal way for users to be able to unlock the scooter speed when they use it on private land or in countries where higher speed is allowed.
What if you disconnect the speed sensor? Obviously you won't see any speed in the display anymore. But does it still run? (with unlimited speed). Or doesn't it run at all without speed sensor?
@@newenergy8994 What speed sensor? AFAIK there is no way to just disconnect some wires to make it go faster or ignore the controller firmware that is determining all functions of the scooter. Take a look at how people make modification on the Ninebot Max to get an idea what might be required, but nobody has tried custom firmware on the NIU afaik.
@@Lantea13 i think he means the hall sensors in the motor itself, so if you put those sensors further away it might go a little faster
The truth is they don't have replacement batteries they want to force u to order a new scooter just don't order from NIU again
Did you try and ask them if you can buy a replacement battery and they refused to sell you one? If that is the case I would be interested to look into this further. If you can post a copy of your communication with NIU I will be happy to ask them about it myself.
Don't buy it for 600 euros thrown away....... In 6 months I have sent it 4 times to Germany for repair, they don't have points in Italy for repair. They don't speak Italian, but Italian money is convenient for them. Unreliable people and poor product. With the old xiaomi scooter, not all the failures I encountered on this scooter had happened to me. Bought on 11/26/2022 and in July 2023 it broke for the 4/5th time because in the last ticket, in addition to the second breakage of the ignition button, error 03 was added to the accelerator. Buy other brands.
Dont order anything from NIU its impossible to get a scooter repaired and this guy will send u on a wild goose chase and then erase your comments
What are you talking about, you can order spare parts direct from NIU over at niu.b2x.com/shop or contact NIU directly at Global-Service@niu.com
Also there is no need to spread lies about comment deletion, your comments will not be deleted unless they are vulgar or use language that breaks YT terms of service and are automatically deleted by RUclips moderation.
@Lantea13 Wow, I needed a new glass display screen it's about £5 but almost £50 for shipping fees.
Changing the tires for these things is almost not worth owning it. It’s easier to change a car tire
It can be a bit tricky to change the tyres, but unless the tyre is severally damaged, you can try using a tubeless tyre plug kit to repair any punctures without taking the tyre off the rim.
You might also find these videos by @ScootLetsGo useful ruclips.net/video/bX0P59Ir0G8/видео.html ruclips.net/video/sAZnTLp2qWM/видео.html