Peugeot 3008 1.6hdi clutch replacement / zamjena kvačila
HTML-код
- Опубликовано: 12 сен 2024
- Peugeot 3008 1.6hdi clutch replacement / zamjena kvačila. flywheel was allready replaced by other garage but not replaced a clutch . I hope you will like this video and subscribe and like / share or dont like it is up to you
LINK TO CLUTCH RELEARN PROCEDURE • Peugeot 3008 1.6 hdi c...
#autoservisivucnasluzbaSALE
I hope you will like this video or parts of it that will help in your work
if any questions put it in comments or on my e mail
Hi is the for the etg6 or egs?
How do u tell if the clutch is wearing?
the clutch is slipping in 5th or 6th gears sometimes in lower gears
@@AutoservisSALE do you have to do anything software wise after the install? i.e reset the hydraulic pressure
@@AutoservisSALE Good evening my friend, I am a truck mechanic, but I make my own vehicle. I have the Peugeot 5008 (2010) and I replaced the clutch, what I want shows me please, is how to learn the clutch with the diagnostic, thank you. Incidentally I am from Czech Republic, but live many years in Greece.
RUclips recommended me this channel. Im impressed with your content, you dont hide own mistakes (others do, trying to be perfect when they arent on real time). You do very skillfull 4x4 mods too, hope you get more projects because are detailed and well made
Really, good work
thank you that means a lot
Small point. If you have 2011 model like me you might wonder why metal battery tray won't come out even though you took out all visible bolts. It is because here is 1 bolt holding it which is put through underneath from the wheel arch. It is only accessible when wheel and arch linings are removed.
stupid bolt
The best mechanic !
thnx
Part Number for MCP Actuator Fluid is: 9979 A4 which costs £30.98 inc Vat UK retail
?
cheers mate always good to have fluid part number👍
Hi, Great video professional job. My question is you haven't showed the end process through computer how to reset it back.
hi thanks for your comment ,there is another video with reset procedure
thanks for great video now i know this job is not for diy-er like me...
Glad to help
thanks for the video. Question: Is it completely necessary to change the dual-mass flywheel or is it just enough to change the clutch kit as seen in the video? I have to change the clutch and I don't know if I should buy the dual-mass one. It is very expensive. Thanks for the help.
hi thanks for your comment ,yes it is necessary to replace whole kit with DMF ,if DMF is not replaced you will have problem calibrating gearbox DMF in video is replaced but not on video ,it is to expencive to not replace DMF ,if its not trouble for you would you consider subscribing to my chane to help me grow,thanks
Pozdrav, da li je taj menjač dobar tj. pouzdan i pošto je robotik jel ima duplo kvačilo ili samo 1?
pozdrav mjenjač je dobar kvačilo je isto kao i na manualnom mjenjaču sa dvomasenim zamajcem
@@AutoservisSALE Hvala
Imam 3008 1,6 hdi robotizovani semiautomatik.Menjali su mi komplet kvacilo i zamajac zbog tresenja pri polasku.Sada ne trese ali blokira u prvoj ili trecoj brzini pri voznji i dize obrtaje,moram da stanem ,izbacim u N pa ponovo ako imam sreke bude u redu.Majstor se ne javlja.Sta moze biti,unapred hvALA
Wow, so much work only to change the clutch, must be very expensive labour cost.
Admire your patience
it s not so expensive about 140€
@@AutoservisSALE wow . In uk they asked for 1650£ parts + labour
@@mihaimatusoiu557 cheaper to buy parts yourself and find a mechanic that knows what he’s doing. My 2008 semi auto is going in on Friday. If your based in the northwest I can recommend a good European mechanic.
@@mihaimatusoiu557 My garage told me it was 10 hours labour to replace the clutch including flywheel on a peugeot 3008 semi auto 2013 plate. After market clutch kit was £500, labour £800
@@Boss-313 Please can you recommend the mechanic. Am in similar situation, only mine is happening intermittently. From what I've read it's either clutch or actuator
Pozdrav i svaka cast, gledam tvoj video jer i mene ceka slican posao - zamena seta kvacila sa zamajcem. Posto ima raznih kompleta na internetu da li mi mozes navesti par modela npr od LUK, VALEO,.. koji pasuju za Peugeot 3008 2011 1.6 hdi
Hvala
hvala najcesce ugrađujem luk i sachs
Da li mozes da napises neke modele ili brojeve tih kompleta?
dijelove naručujem isključivo po broju šasije
Hay mate from Australia, how did u support the engine wen u removed the gear box mate an did u remove the kframe
hi
yes i did removed subframe ruclips.net/video/2DQoixm44Nk/видео.html
and the engine is soported by wood ruclips.net/video/2DQoixm44Nk/видео.html
hi friend
two question
1) i do the same and and the stop start stop working even the new clutch work what could be programed
2) show us how to programe it after the new clutch installed to see where my proplem
thanx
Ill try to explain you tomorow ,or will make you a video how to do that
Contact me via my page so i could try to help you
facebook.com/1577100369187756/
Can you tell please how many liters oil I must to put in semiautomatic gear box for Peugeot 5008 1,6 Hdi 2014? By changing oil
hi
it takes around 2.0 -2.3 liters
Da li ste imali iskustva sa treskanjem auta pri kretanju, kao da zaigra taj citav sklop. 2.0hdi 3008 2009god. Stavljen je novi set kvacila sa zamajcem sachs. Svi novi nosaci motora/mjenjaca. Provjerena poluosovina... Da li ste imali mozda iskustva sa tim problemom lp
auto je automatik ili rucni mjenjac
Hi didn't you change the thrust bearing at all ? I'm doing one today. It's not that easy I would say.
yes i did
I kako ste znali da je do kvacila problem?Kako se auto ponasao pre zamene pa ste shvatili da je do kvacila a automak je.
kliže kvačilo u svim brzinama ,na nekima kliže samo u 4 ili petoj brzini
Sale dali menjate na Pezou 1007 tiptronic korpu i lamelu ?
naravno
My peuget 3008 semi when driving in auto changes to m some times then back to a any idea ?
hi what does diagnostic says
Imam peugeot 508 1.6e-hdi robot automatik (semi automatik). Imam problem takav da pri kretanju u prvoj i rikvercu ponekad se osjeti udar. Redovno u prvoj kad se priblizim lezecem policajcu, auto vrati u prvu brzinu, a nisam skroz stao, pa automatika kao ko i kod klasicnog manulaca sto bi covjek uradio mora dodati gasa da kompenzira brzinu kretanja auta od npr. 5kmh i tad ae osjeti trazaj koji se rijetko ako bi skroz sta poslije lezeceg i krenuo. Ono sto me najvise muci vise od ovog svega je i bilo kojoj brzini kad pustim gas je cimanje kao da sam brzo dotaknuo kocnicu. Da li to moze bit do nekog od nosaca motora ili mjenjaca? Auto u leru nornalno radi ne trese. Ili je pak do lamele i zamajca. Sto se tice vuce, auto vuce u svakoj brzini bez problema i u 5 i 6 brzini iz malih okretaja.
na tom vozilu je potrebno odraditi kalibraciju kvačila i mjenjača
@@AutoservisSALE odvezao u ovlesteni servis, mehanicar probao auto kaze to je karakteristika ovog mjenjaca i da ce napravit dijagnostiku i ako ne bude greske na mjenjacu da bezveze ne radi kabliraciju i tako i bi, nema greske nije uradio. 🙄 Ja ne vjerujem da je tako auto napravljen da zatrza kad pustis gas. Otisao u neovlasteni i tamo su ustanovili da su nosaci motora losi i gornji i donji. Zamjeno oba tj. tri dijela(gornji je iz dva dijela) . Gornjem dijelu gdje drzi ulje popucala guma pusto ulje i lego, a donjem nosacu popucali krakovi. Samo mi preostaje zamjenit nosac mjenjaca, ali njega nema nigdje naci kupiti. Od pobljsanja jedino ima da auto radi u leru gotovo bez ikakvi vibracija i da upali bez trzaja. Ne znam da li bi mjenjao druk lezaj lamelu i zamajac, jer auto normalno salta i vuce u svakoj brzini i iz niskih obrtaja.
@@AutoservisSALE moj auto je 2013g. I kako sam nakon malo iztrazivanja zakljucio ima updejtanu verziju EGS mjenjaca jer je elektronika magneti marelli na mjenjacu. Moj auto također krece bez gasa. A facelift 508 od 2014 1.6 e-hdi ima etg6 mjenjac, i na jednom ruskom site-u sam nasao da je razlika samo sto je na etg6 bosch elektronika ili mehatronika na mjenjacu umjesto magneti marelli...
puno puta u ovlastenom servisu rade ljudi koje to ne zanima i baš ih briga najradije bi da vam ugrade sve novo i sa vasim novcem da istrazuju kvarov e,naravno nie tako u svima drago mi je da ste rijesili problem
@@AutoservisSALE Nisam ni rijesio problem, nosaci su blago popravili stanje, ali nisu rijesili. Taj u ovlastenom bolje sto i nije radio kalibraciju kad ima takvo razmisljanje. Da barem nije ovo stanja sa koronom tj. da nema ovih komplikacija preko granica doso do vas na servis.
Interval menjanja ulja u semi automatic menjaca ko u videu, samo na Peugeot 3008 HDI 1.6 2009, molim vas pisite mi odgovor. I Peugeot serivisu su mi rekli da je to zatvoren sistem i da se ulje u tom menjacu ne menja. Meni je to cudno. Mada tako pise I u manuel knigi koja ide sa autom. Cudno.
Recite mi vase misljenje molim vas ☺️. Veliki pozdrav iz Makedonije.
pitanje je zasto bi vi htjeli zamjeniti ulje
@@AutoservisSALE pa da, u Peugeot ovlastenom servisi su mi rekli da je to zatvoren sistem i da se ulje ne menja. Tako je pisalo i u manuel knjigu koju sam dobio sa autom. Proverio i na internet-isto pise, da se ulje ne menja. Ali meni je to cudno. Kako to da se ulje u automatic robotiziranom menjacu ne menja ulje???? Stvarno cudno! Imate li na to odgovor??
hello that clutch is self adjusting why didn't you do it with the special tool?
the tool was not used because the user requested that the vehicle be repaired as soon as possible and signed that he understood the possibility of damage to the clutch during assembly without tools,
How much does it cost to change the clutch actuator and fly wheel of Peouget 308 2010 semi automatic?
depends on where you live ,in croatia is around 150€ for labor
@@AutoservisSALE and parts
parts are around 1000€
Druže, da li Peugeot 3008 2.0 HDI 163hp ima pravi automatik ili poluautomatik (robotizovani), i koja je razlika između ova dva- koji je pouzdaniji? Hvala
pozdrav nisam siguran za 2.0 jer ih je kod mene jako malo skoro pa nista na servisu jer su skupi za uvoz pa ih nema
@@AutoservisSALE hvala druže, neki kažu da navodno taj 2.0 ima pravi automatik, valjda oznaka AT, a ne poluautomatski (AMT), pa je kao stoga pouzdaniji.. to ne znam. Inače, interesuje me i koliko je veća potrošnja na automaticima između 1.6 i 2.0, ako znaš. Hvala i pozdrav
@@AutoservisSALE A ovaj 1,6 automatik da li ima robotizovan menjac?
ima
@@Propolizei Mjenjac je skroz automatski u 2.0 hdi motora, dakle ne postoji nikakvo kvacilo vec pretvarac momenta, vecina ih je od AW (Aisin-Warner) i nema nikakve veze sa mjenjacem u videu. LP
Hello is automatic gearbox??
hi
this is manual gearbox with automated gear shifting an clutch control
You made any settings on the shifter module?
yes i did callibrated it
Why didn't you change the flywheel and pressure
i did changed it
I have this engine and egs gearbox, when cold in 1st gear it judders. Once warm it goes away, any ideas?
hi
its hard for me to say but it looks like a flywheel or engine or gearbox mount
I have the same issue since last week on my C4 1.6 eHdi 2014 diesel. Not sure if it’s a major issue, will be taking in to service in few weeks. Let me know how you go as well. Hopefully it’s not an expensive repair
Flywheel issue . Did the same on my 508 hybrid , and now im waiting for my complete clutch to be changed .
Mine judders in 1st gear pull off think its my clutch ?
New gearbox learning procedure once a year probably
Very informative but that crappie repetitive music has got to go.
i hate this music also:)
I have same car when i pull off car judders bad in 1st is this the clutch ?
it could be bad clutch or dual mass flywheel
Just had both changed and still it judders?
Hi witch make diagnostic tool use thanks
hi i use a brain bee b touch9000 or diagbox and newest texa id5
Koliko kilometara je proso ovaj pezo prije zamena zamajca?
bok
koliko je presao stvarno ne znam auto je dosao kod mene nakon drugog mehanicara koji nije znao utvrditi problem pa je izmjenjao hrpu dijelova između ostalog je stavio polovni zamajac , ispravan naranvo ali nije zamjenio set kvačila
Hi how much would this cost to do in a garage
hi
in my garage is around 120-130 € labor only parts are aprox 1000€
@@AutoservisSALE what exactly costs 1000€ in parts ? 🤔🤔
flywheel,pressure plate ,clutch plate,thrust bearing
@@AutoservisSALE is it common problem on this engine ? I seen a lot of videos replacing it at 110.000🤔 I'm worried about my as it's very expensive. I have c4 2014 1.6 115 ehdi semi automatic 🤔 and I have 104.000
if you don t feel any judder while gear shifting or slipping clutch then you dont have to worry about it most cars in my videos are from dealers who sale used cars
I gde se nalazite??😅
nalzimo se u Hrvatskoj