I BROKE My NEW ATV in 5 Minutes
HTML-код
- Опубликовано: 27 авг 2024
- Junk... I think I blew up the computer. Also don't do this stuff. This isn't how you unload your atv
SUBSCRIBE OR I'LL TAKE YOUR CANDY
/ 9beavisa. .
teespring.com/...
Suzuki Revive series : • Suzuki 750 Project
MY GEAR / Shopping on Amazon? : goo.gl/YcPzCL
Shopping on Ebay? - tiny.cc/dve3gz
FACEBOOK: / 3dmachines
INSTAGRAM: / 3d.machines
#junk
#atv
When you winched it up on the tree I don’t know a whole lot about Suzukis I’m at Honda guy but I believe there is a flip over sensor that think you flipped over
Jackson Rumburg good ods hondas have a flip over sensor, even the old er ones 2000+
Flip over sensor and there is a knob on the side of the winch to release it so you could get it out the tree
I like Polaris
I saw your Instagram story and I thought you were going to upload the video riding the four wheelers with your new friend José,
but it seems you didn't film anything 😥😥
Did you watch the video he literally said he's going to post a video of that
Remember when you faked someone stealing your bike haha
imagine his neighbors looking out of the window or someone driving by😂
This was pretty entertaining to watch bud I have to say
6:38 woman voice in the garage , is she your new girlfriend?
Bro that’s the voice of a female over 50 yrs old
Maybe his mom
I’m kidding
It should have a tilt sensor. That will kill power in A roll over
Time to do a lil bypassing for those crucial times you want to have a picnic with a view at the top of a tree.
if everything is dead, try checking the main fuse my dude, especially if you are pulling a ton of current with something like that winch
PUT TWO 1MM SHIMS ON THE CLUTCH
Went from trying to be Adam LZ to trying to be Tanner Fox now trying to be Brayden Price .. bro be orginal
put the winch to freespool...save a lot of headaches pulling cable out..lol
I miss the good old days of 3Dmachines productions. It seems that Dalton lost interest in making videos. The channel goes downhill 😭😭😭
Man, these comments on his channel never go away. I haven't been watching his channel these days, but every now and then I'll catch one of his videos. It never fails that I see someone crying about how his videos aren't like they used to be. And usually the comment gets a decent amount of likes. If you don't like his videos, then take a hike. Stop living in the past. That time in your life and his is gone. But one thing is certain, he doesn't want to make whatever type of videos you guys keep asking for, or he'd be doing it. Stop worrying so much about what some guy on the internet is doing with his life. Watch it or don't.
@@kevinhenson5942 Why do someone else's views offend you?
@@theflyingspaghettimonster3252 I wouldn't say they offend me. I'm just tired of seeing all the cry babies on his channel.
@@kevinhenson5942 don’t worry about it
Maybe look into a clutch kit. It will bring back the power that you lost from the bigger tires
LOL, my iphone was close to the puter when you asked "Siri, how do I get a four wheeler out of a tree?" And it responded exactly like you did in the vlog.
You have to check the belt if it’s a bad belt you will get no power it’ll just spin the belt and slip. Also you have to put a clutch kit in it it makes 1000% of a difference
It probably has stock clutching. With the bigger tires and everything the clutch needs to be tuned
There’s probably a low oil shut off, with it being up right it’s probably reading low
Change out the spring in your clutch for a stiffer one it will allow the engine to rev before lock up and it should wheelie pretty easy!!I I have a polaris that wouldn't wheelie until I changed out that spring now it's a wheelie machine 🤘🤘very entertaining video 3D👍👍that suzuki seems gutless a 750 should wheelie pretty effortless!!🤕
Inspect the drive belt it may be slipping causing u to lose momentum
It looks and sounds like it's been beat on pretty hard before you got it. especially the way it doesn't want to start
Check the main fuse. Im sure your smart enough that you have it fixed by now.
I would check the belt. May have some slip
We need more videos Dalton!!!
My buddy was really disappointed in his KingQuad after a couple of months of ownership. They didn't really have much land for him to ride on at the dealership to get a real good ride out of it before he purchased it. He ended up trading it in towards a Can-Am Renegade X MR 1000R. Now if you want to talk about serious power and torque and about the beast of all 4 wheelers, that Can-Am is NUTS. I have never ridden a 4 wheeler that will roast all 4 tires on pavement in 4 wheel drive at will until I road that thing.
That thing is fast. If your not a very big guy like my scrawny arse, you will get some good arm pump riding one of them. Hitting the throttle without leaning way over the bars is not recommended either. My buddy is 6ft 5 220lbs and his Can-Am still pulls the front wheels off the ground with ease. I was looking at their turbo charged side by side, but those are pretty dang pricey, and I just purchased an Indian Scout Bobber back in August, so I really don't want any new payments right now.
There is a bunch of videos on that warn winch. They get messed up when they get wet. Picked up one in the scrap yard. It was nasty in side. Water got in it and stayed. I thing it's the freewheel rope pay side. But they seek parts for them. One of the parts was 40 bucks. For now it's in a box.
It's called weight distribution. Not every four wheeler can pop wheelies!
Hey man, I see you're having low power. I'm all too familiar with that on the 500 and 750 King Quads. One thing about them is their really picky on the plugs they use to get their full power. The best one I've found is the NGK CR6E. Another problem with them, especially down in places like Florida with a lot of sand is the fuel pump sock getting very restrictive and also the fuel injector stopping up some. Check all of that and I bet one of them if not a combination of them is the low power issue.
I’m glad I got the 2020 AXI. Old ones seemed gutless.
If you want to do wheelies hold the front hand brake and rev it alittle before you launch
It's like a crash sensor in a car, it thinks u flipped over, u can bypass it or maybe disconnect the battery for awhile. A Yamaha would do the same thing. All newer quads have sensors like that.
only ogs will remember the maniac on the Yamaha video with the little kid
edit; and the old mudding vids
But a tipping sensor will cause the quad to shut off and sometimes it will turn the quad off completely where you need to disconnect the battery and plug it back in and reset it and you should have your gauge cluster back because mine does the same
Zuki's and most newer quads like that should have roll-over sensors to cut power and/or fuel. You probably done zoinked the sensor my dude, unplug battery and wait, let it discharge and plug the booger back in. She should rip again! As for no power, shim the flipping clutch!
I rebuilt a blown Kingquad 700 for a customer/acquaintance. Ran perfect for 200mi then I got a call that it was dying. I went and checked it, ran great, but if ya wheelied it...it would die. It had a full tank, they're fuel injected, couldn't find a short or bad connection anywhere. Didn't have the adapter to hook it up to a computer, and could not figure it out. Spent DAYS trying to figure it out and never did. Still runs great 10yrs later but dies if you wheelie it. WTF????
"Hey siri how do i get my four-wheeler out of a tree?" Siri" I found this on the web" Dalton: "This is a common problem?" wtf lmaooo if its common then some people shouldnt be allowed in the country lmao
I used to watch this channel years ago been looking for it for months i forgot the name of it finally found so.glad to see your still puting out videos
Main fuse is blown after holding the button as long as u did plus u put a even bigger load on it
Well that’s one way to make oil not get to the head and seize it up.
It may have been a tip sensor that killed everything when it stood straight up
That is the most powerless quad I have ever seen
Love the one foot meneuver
I actually feel dumber after watching this video.
id say half your problem is the last owner i bet took that machine through a lot of mud and deep water judging by its snorkels and relocated rad , Suzuki's arn't bad you just got a lemon and i would not be surprised if the belt drive system is worn or had water in it but them tyres will definitely be slowing it down
Hey Dalton I'm pretty sure there is a safety switch for when you flip the wheeler. Usually when all 4 wheels come off the ground it acts like it senses a roll over and shuts down. You probably just have to reset it.
Next time get a Can-am Outlander 1000XT...I just got one and that thing's nuts. It has injectors so no carb issues, 3 levels of power steering (I am using the medium and it's more than enough) and it rips and drifts and does all kinds of cool stuff. Also I recommend wheel spacers for stability and doing fun stuff.
edit: spelling
@Josh Frank I don't know how pricey Can-ams are in you country, I got mine for almost 10k here (not new of course) and it's mint condition
Blew your main fuse or roll over sensor was tripped
Put a different clutch spring in it
In high hood the front brake enough to spin rear tires, let go and put it to the bar
Something is definitely wrong with it. My KingQuad 750 wheelies without pulling up on the bars. It is 100% stock as well.
Yes it will to willie!!! Its called clutch upnot jerk it up,or get it up by body weight
I D TEN T When you put a larger tire package on your shit and do NOT CHANGE THE FINAL DRIVE RATIO, you just turned your ATV into shitwagon.
Your shit stopped running when you went vertical due to the oil pressure loss shutdown sensor.
Clutch that baby up and whip !!
You had that thing looking like a Chinese quad and 20 years old in an instant and idk how
Haha, definitely an "oops" moment.. Good times.
I bypassed my tipping sensor because I got sick and tired of doing wheelies in the water and causing my quad to quit at 11 and sometimes 12 would turn off when I was in a wheelie definitely bypass it save you lots of crap
The ECM doesn’t give you the full motor until over 5 mph. They mapped the motor like that to reduce liability.
It probably has a sensor that shuts it off when it tips over. Its probably the same sensor that's in trunks for the light to turn on but this kills the power. Just cycle the key on and off a couple of times and it should start.
You need a clutch kit from epi i had the same problem with bigger tires
Try a new belt to see if that fixes loss of torque and maybe they did clutch work to make it crawl in mud rather than have torque and speed bc the new king quads haul ass
You bet. My kingquad 750 hauls ass
it shouldn’t have that low of bottom end power just because of wheels and tires maybe its regeared higher or im not sure if that quad has sprockets or not but maybe just check if it has aftermarket sprockets that are a diffrent size than stock if its not that maybe theres electronics on it that’s robbing power ive ridden 500cc utility quads that lift the front end up no problem that 750 should have more than enough power to do a wheelie
My buddy has one and I can sit on the seat and gun it it comes right up in high idk why it won't bit wen u get it fixed u will be able to wheelie like crazy
I’ve been liking the content
There's a tipping sensor I have a 2020 Suzuki and that quad should be able to pull wheelies I have as many cc's as you do and I'm running Silverbacks 30s online with a 2 inch lift kit obviously your quad is low on power or something or maybe the belt could be going
thats actually a pretty sick quad dude
I hope you can get her fixed up and we can see a 3Dmachines and braydon price four wheeler collab video
Probably could have turned the quick release knob on the winch but good vid
You should get a Can-Am
I have the same bike and I can do wheelies and it has never been a problem
It’s your tilt sensor fill it full of silacone won’t have that issue again
I have a 2005 Suzuki king quad 750 rips perfect have no problems with it
It should wheelie pretty easy I’ve seen them do them easy
Probably Operator error🤣🤣jk!!
Warn winches are amazing. Probably just a shitty quad problem
That piece of junk lmao
Keep your head up trust me it’s gonna pay off ik it’s haters saying this channel died etc but we gonna get it back to 100% just keep doing you
It did die for a long time. He was getting over a 100k views about 4 years ago and then he quit uploading for like 3-4 months without any explanation and then just pops back up like nothing happened and a lot of people were pissed at him and quit watching. He had several projects going on like crush, the jeep, the bmw, the gator, etc, and none of those ever got finished so people quit watching. His channel didn’t completely die but he hasn’t gained that many subscribers within the last 4 years.
@@blake1995 ik but still least he’s getting back to that content
Okay pro tip keep your fourwheeler running while using a winch
i think its some kind of safety thing that when it is flipped it will turn off by itself.
Mine has the same issue it’s the key barrel
ogs remember how old this trailer is in the very beginning
Get a tuner for it so you’re gonna be using other stuff like that it’ll run a whole lot better
This is my first time watching your video. Have to say you were very entertaining, had me chuckle few times watching you try to get a wheelie! Subscribed!! 😂
There's definitely something wrong with that thing. A 750 should wheelie easily while leaving 20' of roost too.
Yep. My kingquad 750 will do wheelies and throw tails all day long
Put a clutch kit in it!
It’s probably a blown fuse from using the winch it probably got hot and blew one
I think you have some other issue maybe clutching, but those tires aren't very big 750 shouldn't be phased by that.
Wow I’m so glad I found your RUclips again I used to watch you back when u made that weed wacker ripstick 😂can’t wait to catch up on all the vids
You tripped the roll over sensor,
Is that the six shooter shift knob with the stash spot form autozone xD ?
dude you need to make your vids at least 10 min long love the vids bro
That thing should have a lot of power for it being a 750
Geez.Talk about 'going out on a limb'for a chuckle...
Great video as always!!
It doesn't help any of oversized wheels and tires on it do I have stock tires on it to do that stuff wheelies in that and more power
suzukis ride smooth but are heavy boat anchors
give it a carb clean i used to have one and it went hard as
She'll be alright
I’ll take it if you don’t like it😂
750? Huh I got 570 with big tires on it does great
I have a 750 brute force Kawasaki. It will pull the front end up without issue on 32” outlaw tires. Yours needs help.
Should have got a kawi buddy.
i got a bruin 350 and been throw hell and multiple times